1、BSEN13083:2008ICS13.300;23.020.20;23.040.60NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAWBRITISHSTANDARDTanksfortransportofdangerousgoodsServiceequipmentfortanksA daptorforbottomloadingandunloadingBS EN 13083:2008 +A1:2013BS EN 13083:2008+A1:2013ISBN 978 0 580 77580 2Amendments/corrige
2、nda issued since publicationDate Comments30 June 2013 Implementation of CEN amendment A1:2013This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2009 The British Standards Institution 2013. Published by BSI Standards Limited 2013Nation
3、al forewordThis British Standard is the UK implementation of EN 13083:2008+A1:2013. It supersedes BS EN 13083:2001 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amen
4、dment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can be obtained on request to its secretary.Th
5、e publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13083:2008+A1 June 2013 ICS 13
6、.300; 23.020.20; 23.040.60 Supersedes EN 13083:2008 English Version Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading Citernes de transport de matires dangereuses - quipement de service pour citernes - Adaptateur pour le chargement et le
7、dchargement par le bas Tanks fr die Befrderung gefhrlicher Gter - Bedienungsausrstung von Tanks - VK-Kupplung fr Untenbefllung und -entladung This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 1 March 2013. CEN members are bound to comply with
8、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage
9、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat
10、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
11、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights o
12、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13083:2008+A1:2013: E EN 13083:2008+A1:2013 (E) 2 Contents Page Foreword 3 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Function 7 5 Design characteristics 7 5.1 Ty
13、pe .7 5.2 Actuation 7 5.3 Pressure rating .7 5.4 Materials of construction 8 5.5 Temperature range 8 5.6 Product identification and communication systems .8 5.7 Interlocks 8 5.8 Mounting .8 5.9 Position indicator (optional) .8 5.10 Presence of product in the adaptor .9 5.11 Overall size .9 5.12 Liqu
14、id seals 9 5.13 Drainage 9 6 Tests 9 6.1 General 9 6.2 Production tests.9 6.3 Type tests 10 7 Marking 12 8 Installation, operation and maintenance instructions 12 Annex A (normative) Adaptor nose 13 Annex B (informative) Optional interlock actuator . 14 Annex C (informative) Allocation of function s
15、ectors 15 Annex D (informative) 4 hole fixing 17 Bibliography . 18 BS EN 13083:2008+A1:2013EN 13083:2008+A1:2013 (E)EN 13083:2008+A1:2013 (E) 2 Contents Page Foreword 3 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Function 7 5 Design characteristics 7 5.1 Type .7 5
16、.2 Actuation 7 5.3 Pressure rating .7 5.4 Materials of construction 8 5.5 Temperature range 8 5.6 Product identification and communication systems .8 5.7 Interlocks 8 5.8 Mounting .8 5.9 Position indicator (optional) .8 5.10 Presence of product in the adaptor .9 5.11 Overall size .9 5.12 Liquid seal
17、s 9 5.13 Drainage 9 6 Tests 9 6.1 General 9 6.2 Production tests.9 6.3 Type tests 10 7 Marking 12 8 Installation, operation and maintenance instructions 12 Annex A (normative) Adaptor nose 13 Annex B (informative) Optional interlock actuator . 14 Annex C (informative) Allocation of function sectors
18、15 Annex D (informative) 4 hole fixing 17 Bibliography . 18 EN 13083:2008+A1:2013 (E) 3 Foreword This document (EN 13083:2008+A1:2013) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall
19、 be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2013 and conflicting national standards shall be withdrawn at the latest by December 2013. Attention is drawn to the possibility that some of the elements of this docu
20、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13083:2008“. This document includes Amendment 1 approved by CEN on 2013-03-01. The start and finish of text introduced or altered by
21、amendment is indicated in the text by tags !“. This European Standard forms part of a coherent standards programme comprising the following standards, under the general title “Tanks for transport of dangerous goods - Service equipment for tanks“: EN 13081, Vapour collection adaptor and coupler EN 13
22、082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non-pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention systems for liqui
23、d fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems Working principles and interface specifications ! EN 16249, Cap for the adaptor for bottom loading and unloading“ The standards programme also includes the following
24、 Technical Report: CEN/TR 15120, Guidance and recommendations for loading, transport and unloading. !Compared to EN 13083:2008 the following changes have been made: a) in the Foreword add EN 16249 to the list of standards; BS EN 13083:2008+A1:2013EN 13083:2008+A1:2013 (E)EN 13083:2008+A1:2013 (E) 4
25、b) in Clause 2, Normative references, add: EN 16249 Cap for the adaptor for bottom loading and unloading c) in Clause 4, Function, the last paragraph is modified; d) in Clause 5, Design Characteristics, “5.14 Adaptor Cap” is deleted; e) in 6.3, Type Tests, 6.3.1 General, fourth type test is modified
26、; f) in 6.3, “6.3.5 Adaptor cap seat tightness test” and subclauses are deleted and replaced by a compliance test with EN 16249.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,
27、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, S
28、witzerland, Turkey and the United Kingdom. BS EN 13083:2008+A1:2013EN 13083:2008+A1:2013 (E)EN 13083:2008+A1:2013 (E) 4 b) in Clause 2, Normative references, add: EN 16249 Cap for the adaptor for bottom loading and unloading c) in Clause 4, Function, the last paragraph is modified; d) in Clause 5, D
29、esign Characteristics, “5.14 Adaptor Cap” is deleted; e) in 6.3, Type Tests, 6.3.1 General, fourth type test is modified; f) in 6.3, “6.3.5 Adaptor cap seat tightness test” and subclauses are deleted and replaced by a compliance test with EN 16249.“ According to the CEN/CENELEC Internal Regulations,
30、 the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
31、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 13083:2008+A1:2013 (E) 5 Introduction The adaptor for bottom loading and unloading, subject of this European Standard, allows the tran
32、sfer of product through a mating loading coupler to a transport tank and from the tank to a service station tank by a mating gravity discharge coupler. It is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) 1. BS EN 13083:2008+A1:2013EN 13083:2008+A1:2013 (
33、E)EN 13083:2008+A1:2013 (E) 6 1 Scope This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading. This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also spec
34、ifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 2 which have a vapour pressure not exceeding 110 kPa at 50 C a
35、nd petrol, and which have no subclassification as toxic or corrosive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced do
36、cument (including any amendments) applies. EN 12266-1:2003, Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2002, Industrial valves Testing of valves Part 2: Tests, test procedures and acceptance criteria Supplemen
37、tary requirements !EN 16249, Tanks for the transport of dangerous goods Service equipment Cap for the adaptor for bottom loading and unloading“ EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation (ISO 1302:2002) EN ISO 4287, Geometri
38、cal Product Specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287:1997) ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and def
39、initions For the purposes of this document, the following terms and definitions apply. 3.1 Maximum Working Pressure (MWP) (gauge pressure) maximum pressure to which the equipment is designed to operate, being the highest of the following three pressures: a) highest effective pressure allowed in the
40、tank during filling (maximum filling pressure allowed) b) highest effective pressure allowed in the tank during discharge (maximum discharge pressure allowed) c) effective gauge pressure to which the tank is subjected by its contents (including such extraneous gases as it may contain) at the maximum
41、 working temperature 3.2 product sensor device which detects the presence of liquid petroleum and whose output signal can be used to display whether liquid is present BS EN 13083:2008+A1:2013EN 13083:2008+A1:2013 (E)EN 13083:2008+A1:2013 (E) 6 1 Scope This European Standard covers externally actuate
42、d and self actuated adaptors for bottom loading and unloading. This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European
43、 Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 2 which have a vapour pressure not exceeding 110 kPa at 50 C and petrol, and which have no subclassification as toxic or corrosive. 2 Normative refe
44、rences The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2003, Industrial valves Testing
45、of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2002, Industrial valves Testing of valves Part 2: Tests, test procedures and acceptance criteria Supplementary requirements !EN 16249, Tanks for the transport of dangerous goods Service equipm
46、ent Cap for the adaptor for bottom loading and unloading“ EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation (ISO 1302:2002) EN ISO 4287, Geometrical Product Specifications (GPS) Surface texture: Profile method Terms, definitions an
47、d surface texture parameters (ISO 4287:1997) ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purposes of this document, the following terms and definitions apply.
48、 3.1 Maximum Working Pressure (MWP) (gauge pressure) maximum pressure to which the equipment is designed to operate, being the highest of the following three pressures: a) highest effective pressure allowed in the tank during filling (maximum filling pressure allowed) b) highest effective pressure a
49、llowed in the tank during discharge (maximum discharge pressure allowed) c) effective gauge pressure to which the tank is subjected by its contents (including such extraneous gases as it may contain) at the maximum working temperature 3.2 product sensor device which detects the presence of liquid petroleum and whose output signal can be used to display whether liquid is present EN 13083:2008+A1:2013 (E) 7 3.3 interlock device which can be used to initiate or prevent an action 3.4 bottom loading filling o
