1、BS EN 13108-4:2016Bituminous mixtures Material specificationsPart 4: Hot Rolled AsphaltBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13108-4:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13108-4:2016. It supersedes
2、 BS EN 13108-4:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/510/1, Asphalt products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessa
3、ry provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016 .Published by BSI Standards Limited 2016ISBN 978 0 580 82044 1 ICS 93.080.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard w
4、as published under the authority of the Standards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 13108-4:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-4 June 2016 ICS 93.080.20 Supersedes EN 13108-4:2006E
5、nglish Version Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt Mlanges bitumineux - Spcifications des matriaux - Partie 4: Hot Rolled Asphalt Asphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled Asphalt This European Standard was approved by CEN on 27 February 2016
6、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on
7、 application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENEL
8、EC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy
9、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenu
10、e Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-4:2016 EBS EN 13108-4:2016EN 13108-4:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms,
11、definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations 11 4 Requirements for constituent materials . 11 4.1 General . 11 4.2 Binder . 11 4.2.1 General . 11 4.2.2 Selection of binder . 11 4.3 Aggregates 13 4.3.1 Coarse aggregate 13 4.3.2 Fine aggregate
12、. 13 4.3.3 All-in aggregates . 13 4.3.4 Added filler . 13 4.4 Reclaimed asphalt 13 4.5 Additives 14 4.6 Coated chippings 14 5 Requirements for the mixture . 14 5.1 General . 14 5.2 Composition, grading and binder content 14 5.2.1 Composition . 14 5.2.2 Grading . 14 5.2.3 Minimum binder content 18 5.
13、3 Properties . 18 5.3.1 Specimens . 18 5.3.2 Minimum binder volume . 18 5.3.3 Void content . 19 5.3.4 Water sensitivity 20 5.3.5 Resistance to permanent deformation . 21 5.3.6 Stiffness 22 5.3.7 Low temperature properties . 24 5.3.8 Coating and homogeneity 25 5.3.9 Reaction to fire 25 5.3.10 Resista
14、nce to fuel for application on airfields . 25 5.3.11 Resistance to de-icing fluid for application on airfields 26 5.4 Temperature of the mixture 26 5.5 Regulated dangerous substances . 27 5.6 Conflicting requirements 27 6 Assessment and verification of constancy of performance AVCP . 27 7 Identifica
15、tion . 28 BS EN 13108-4:2016EN 13108-4:2016 (E) 3 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used 29 A.1 General . 29 A.2 Calculation of the penetration of the binder of a mixture . 29 A.3 Calculation of the softeni
16、ng point of the binder of a mixture . 29 Annex B (normative) Natural asphalt. 31 B.1 Scope . 31 B.2 Requirements . 31 B.3 Methods of use . 32 B.4 Determination of ash content 32 Annex C (normative) Coated chippings for application to Hot Rolled Asphalt surface course . 33 C.1 Scope . 33 C.2 Chipping
17、s . 33 C.3 Binder content . 33 C.4 Assessment and verification of constancy of performance . 33 C.5 Identification 33 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 34 ZA.1 Scope and relevant characteristics 34 ZA.2 Procedure for AVCP of Hot Rolled
18、Asphalt 35 ZA.3 Assignment of AVCP tasks . 36 BS EN 13108-4:2016EN 13108-4:2016 (E) 4 European foreword This document (EN 13108-4:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a
19、 national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of
20、patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-4:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essen
21、tial requirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral part of this European Standard. Compared with EN 13108-4:2006, the following changes have been made: a) general, empirical
22、 and fundamental approaches have been merged into one list with different properties; b) new properties introduced (low temperature properties); c) additional optional sieves for the characterization of the grading; d) for several properties additional categories are introduced; e) possibility to de
23、fine specific conditions in documents related to the application of the product; f) CPR reference and new Annex ZA according to CPR rules. This European Standard is one of a series as listed below: EN 13108-1, Bituminous mixtures Material specifications Part 1: Asphalt Concrete EN 13108-2, Bituminou
24、s mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN 13108-5, Bituminous mixtures Material specificati
25、ons Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt BS EN 13108-4:2016EN 13108-4:2016 (E) 5 EN 13108-8, Bituminous mixtures Material specifications Part 8: Recla
26、imed Asphalt EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material specifications Part 21: Factory Production Control Annex A (normat
27、ive) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binder and the recovered binder from the reclaimed asphalt. Annex B (normative) gives specifications for natural asphalt. Annex C (no
28、rmative) gives specifications for coated chippings. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland
29、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13108-4:2016EN 13108-4:2016 (
30、E) 6 Introduction The aim of this European Standard is to specify bituminous mixtures on a performance level. Specifications for Hot Rolled Asphalt have traditionally been based on compositional recipes combined with specifications for the constituent materials with additional requirements based on
31、tests on the product. Although more tests are available to provide information on the performance of the material, they are still insufficient to cover the actual performance of the material in the road. Therefore a combination with composition and specifications for the constituent materials will s
32、till be necessary. This European Standard covers a large variety of materials for different applications, traffic and climate conditions. EN 13108-4 gives properties and listings of possible categories. It has to accommodate the road industry for all of Europe. For this reason the menu approach for
33、properties has been chosen. The tables represent categories that are required all over Europe. For this reason numerical values in tables do not always obey statistical rules. Based on conditions of use specific properties and categories may be defined in documents related to the application of the
34、product. The categories defined in those documents need to take into account the reproducibility of the test when this is given in the appropriate test method. Care should be taken to only select those tests which are relevant to the application of the asphalt and the use of the pavement and to avoi
35、d a combination of potentially conflicting requirements. BS EN 13108-4:2016EN 13108-4:2016 (E) 7 1 Scope This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface cours
36、es, binder courses, regulating courses and bases. The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requi
37、rements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated ref
38、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10976:2013, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1426, Bitumen
39、 and bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12592, Bitumen and bituminous binders Determination of so
40、lubility EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods Part 4: Bitumen recovery: Fractionating column EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of
41、void characteristics of bituminous specimens EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-22, Bitum
42、inous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings fo
43、r HRA EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids BS EN 13108-4:2016EN 13108-4:2016 (E) 8 EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-46, Bituminous mixtures Test methods for hot m
44、ix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures Test methods for hot mix asphalt Part 47: Determination of the ash content of natural asphalts EN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfiel
45、ds and other trafficked areas EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed asphalt EN 13108-20:2016, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material specifications Part 21: Factory Production Control EN 13501-1:
46、2007+A1:2009, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13924-1, Bitumen and bituminous binders Specification framework for special paving grade bitumen Part 1: Hard paving grade bitumens EN 13924-2, Bitumen an
47、d bituminous binders Specification framework for special paving grade bitumen Part 2: Multigrade paving grade bitumens EN 14023, Bitumen and bituminous binders Specification framework for polymer modified bitumens EN ISO 3838, Crude petroleum and liquid or solid petroleum products Determination of d
48、ensity or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838) EN ISO 11925-2, Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) 3 Terms, definitions, symbols and
49、abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 pavement structure, composed of one or more courses, to assist the passage of traffic over terrain 3.1.2 layer element of a pavement laid in a single operation 3.1.3 course element of a pavement constructed with a single asphalt mixture BS EN 13108-4:2016EN 13108-4:2016 (E) 9 Note 1 to entry: A co
