1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13126-14:2012Building hardware Hardwarefor windows and balconydoors Requirements and testmethodsPart 14: Sash fastenersBS EN 13126-14:2012 BRITISH STANDARDNational foreword
2、This British Standard is the UK implementation of EN 13126-14:2012.It supersedes DD CEN/TS 13126-14:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/538/4, Building hardware.A list of organizations represented on this committee can beobtained on r
3、equest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 75391 6ICS 91.190Compliance with a British St
4、andard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2012.Amendments issued since publicationDate Text affectedBS EN 13126-14:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13126-
5、14 May 2012 ICS 91.190 Supersedes CEN/TS 13126-14:2004English Version Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners Quincaillerie pour le btiment - Ferrures de fentres et portes-fentres - Exigences et mthodes dessai - Partie 14:
6、Verrouillages came Baubeschlge - Beschlge fr Fenster und Fenstertren - Anforderungen und Prfverfahren - Teil 14: Einreiberverschlsse fr Schiebefenster This European Standard was approved by CEN on 23 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat
7、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stan
8、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nat
9、ional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze
10、rland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Re
11、f. No. EN 13126-14:2012: EBS EN 13126-14:2012EN 13126-14:2012 (E) 2 Contents Page Foreword 31 Scope 62 Normative references 63 Terms and definitions .64 Classification 64.1 General 64.2 Category of use (1 first digit) .64.3 Durability (2 second digit) 64.4 Mass (3 third digit) 74.5 Fire resistance (
12、4 fourth digit) .74.6 Safety in use (5 fifth digit) 74.7 Corrosion resistance (6 sixth digit) 74.8 Security (7 seventh digit) .74.9 Application (8 eighth digit) 74.10 Test sizes Size limitations (9 ninth digit) 74.11 Example of classification for sash fasteners (EN 13126-14) .75 Requirements .85.1 G
13、eneral 85.2 Durability test .85.3 Static force tests 85.3.1 General 85.3.2 Operating force test .85.3.3 Excessive horizontal force test 85.3.4 Excessive vertical force test .95.4 Wear test .95.5 Critical deformation test .96 Test apparatus .97 Test methods 97.1 Samples 97.2 Durability test procedure
14、 . 107.3 Static force test procedure 107.3.1 Operating force test procedure . 107.3.2 Excessive horizontal force test procedure 107.3.3 Excessive vertical force test procedure . 117.4 Wear test procedure . 117.5 Critical deformation test procedure 117.6 Corrosion resistance test 11Annex A (informati
15、ve) Test method diagrams . 13Annex B (normative) Flow Chart of test procedure 14BS EN 13126-14:2012EN 13126-14:2012 (E) 3 Foreword This document (EN 13126-14:2012) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of
16、 which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to
17、the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13126-14:2004. The following is a list of the technical changes made since t
18、he previous edition of this standard, organised according to their relevant clauses: a) Clause 3, Terms and definitions: 1) Definition of “Pull-in“ added as 3.2; b) Clause 4, Classification: 1) Example of classification added in 4.11; c) Clause 5, Requirements: 1) Requirements in the whole of Clause
19、 5: completely revised; d) Clause 7, Test methods 1) Test methods in whole Clause 7: completely revised; 2) Reduction in force from 40 N to 20 N in 7.3.1; 3) Reduction in force from 40 N to 20 N in 7.3.2; 4) Reduction in force from 40 N to 20 N in 7.3.3; 5) Reduction in force from 40 N to 20 N in 7.
20、4. A full contribution to the preparation of this European Standard has been made by the European manufacturers organisation ARGE and National Standards institutions. This European Standard is one of a series of European Standards for building hardware products. It is divided into seventeen parts to
21、 incorporate all types of windows and balcony doors: EN 13126-1, Building hardware Hardware for windows and door height windows Requirements and test methods Part 1: Requirements common to all types of hardware; EN 13126-2, Building hardware Requirements and test methods for windows and doors height
22、 windows Part 2: Window fastener handles; BS EN 13126-14:2012EN 13126-14:2012 (E) 4 EN 13126-3, Building hardware Hardware for windows and door-height windows Requirements and test methods Part 3: Handles, primarily for Tilt EN 13126-4, Building hardware Requirements and test methods for windows and
23、 doors height windows Part 4: Espagnolettes; EN 13126-5, Building hardware Hardware for windows and door height windows Requirements and test methods Part 5: Devices that restrict the opening of windows and door height windows; EN 13126-6, Building hardware Requirements and test methods for windows
24、and doors height windows Part 6: Variable geometry stay hinges (with or without a friction stay); EN 13126-7, Building hardware Requirements and test methods for windows and door height windows Part 7: Finger catches; EN 13126-8, Building hardware Requirements and test methods for windows and doors
25、height windows Part 8: Tilt prEN 13126-9, Building hardware Hardware for windows and door height windows Requirements and test methods Part 9: Hardware for horizontal and vertical pivot windows; EN 13126-10, Building hardware Requirements and test methods for windows and doors height windows Part 10
26、: Arm-balancing systems; EN 13126-11, Building hardware Requirements and test methods for windows and doors height windows Part 11: Top hung projecting reversible hardware; EN 13126-12, Building hardware Requirements and test methods for windows and doors height windows Part 12: Side hung projecting
27、 reversible hardware; EN 13126-13, Building hardware Hardware for windows and balcony doors Part 13: Requirements and test methods Sash balances; EN 13126-14, Building hardware Hardware for windows and balcony doors Requirements and test methods Part 14: Sash fasteners; EN 13126-15, Building hardwar
28、e Requirements and test methods for windows and doors height windows Part 15: Rollers for horizontal sliding and sliding folding windows and doors; EN 13126-16, Building hardware Requirements and test methods for windows and doors height windows Part 16: Hardware for Lift EN 13126-17, Building hardw
29、are Requirements and test methods for windows and doors height windows Part 17: Hardware for Tilt prEN 13126-18, Building hardware Specifications for the fittings for the operation of windows and door height windows Part 18: Requirements and test procedures for durability, strength, security and fun
30、ctionality of Fan light openers for windows and door height windows; EN 13126-19, Building hardware Requirements and test methods for windows and door height windows Part 19: Sliding Closing Devices. Informative Annex A of EN 13126-1:2011 gives detailed schedules of the elements of components of the
31、 seventeen parts of this European Standard. BS EN 13126-14:2012EN 13126-14:2012 (E) 5 Informative Annex B of EN 13126-1:2011 details, in connection with Annex A of the same standard, the concerned parts and their reference to the relevant widow types. Normative and informative annexes to all parts o
32、f this European Standard are indicated in the contents of the seventeen parts. The performance tests incorporated in this standard are considered to be reproducible and as such will provide a consistent and objective assessment of the performance of these products throughout CEN-CENELEC Member State
33、s. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel
34、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13126-14:2012EN 13126-14:2012 (E) 6 1 Scope This European Standard specifies requirements and test methods for durabi
35、lity, strength, security and function of sash fasteners for windows and door height windows. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applie
36、s. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1670, Building hardware Corrosion resistance Requirements and test methods EN 12519:2004, Windows and pedestrian doors Terminology EN 13126-1:2011, Building hardware Requirements and test
37、methods for windows and doors height windows Part 1: Requirements common to all types of hardware ISO 4520, Chromate conversion coatings on electroplated zinc and cadmium coatings 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13126-1:2011 and EN 125
38、19:2004 and the following apply. 3.1 sash fastener device to secure, in the closed position, the sashes of a double or single hung vertically sliding window and the sashes of a horizontally sliding window 3.2 pull-in distance the sashes are moved towards each other during operation of a sash fastene
39、r from a fully open to a fully closed position 4 Classification 4.1 General The classification for sash fasteners shall be in accordance with the requirements of Clause 4 of EN 13126-1:2011. 4.2 Category of use (1 first digit) No marking is required for the category of use in accordance with 4.2 of
40、EN 13126-1:2011. 4.3 Durability (2 second digit) Grades shall be in accordance with 4.3 of EN 13126-1:2011 and 5.2 of this standard. BS EN 13126-14:2012EN 13126-14:2012 (E) 7 4.4 Mass (3 third digit) Grades shall be in accordance with 4.4 of EN 13126-1:2011. 4.5 Fire resistance (4 fourth digit) One
41、grade shall be identified in accordance with 4.5 of EN 13126-1:2011. grade 0: no requirements. 4.6 Safety in use (5 fifth digit) One grade shall be identified in accordance with 4.6 of EN 13126-1:2011. grade 1: The hardware shall conform to the requirements of EN 13126-1 and this standard. 4.7 Corro
42、sion resistance (6 sixth digit) Grades shall be in accordance with 4.7 of EN 13126-1:2011. 4.8 Security (7 seventh digit) No marking is required for the category of security in accordance with 4.8 of EN 13126-1:2011. 4.9 Application (8 eighth digit) The eighth digit shows “14”, indicating the part o
43、f the standard that was used for testing the sash fasteners in accordance with 4.9 of EN 13126-1:2011. 4.10 Test sizes Size limitations (9 ninth digit) The ninth digit shows the test sizes in accordance with 4.10 of EN 13126-1:2011 as follows: S.W. 1)in mm / S.H. 2)in mm EXAMPLE 600 S.W. x 1 200 S.H
44、. NOTE The specified size is a test size only. It does not relate to the maximum size to which a window may be fabricated. 4.11 Example of classification for sash fasteners 1 2 3 4 5 6 7 8 9 - 5 040 0 1 3 - 14 600/1 200 The example above denotes a sash fastener, which has the following classificatio
45、ns: Digit 1 category of use (no requirements) 1) S.W. = sash width 2) S.H. = sash height BS EN 13126-14:2012EN 13126-14:2012 (E) 8 Digit 2 durability grade 5 (25 000 cycles) Digit 3 mass 40 kg Digit 4 fire resistance grade 0 (no requirements) Digit 5 safety in use grade 1 Digit 6 corrosion resistanc
46、e grade 3 Digit 7 security (no requirements) Digit 8 applicable part tested in accordance with part 14 of this standard Digit 9 test sizes S.W. = 600 mm, S.H. = 1 200 mm S.W. = sash width S.H. = sash height 5 Requirements 5.1 General The requirements for sash fasteners shall be in accordance with Cl
47、ause 5 of EN 13126-1:2011. 5.2 Durability test The test specified in 7.2 shall be used to ensure the sash fastener is capable of continued operation after cycling in accordance with the grades specified in 7.2, with regard given to normal maintenance. Upon completion of the durability test in accord
48、ance with 7.2 the sash fastener shall continue to function normally. 5.3 Static force tests 5.3.1 General The tests specified in 7.3.1, 7.3.2 and 7.3.3 shall be used to ensure the hardware is capable of withstanding both normal operations and excessive forces with minimal deformation. 5.3.2 Operating force test Upon completion of the operating force test in accordance with 7.3.1, the operating force shall not exceed 5 Nm nor an applied force of 50 N. 5.3.3 Excessive horizontal force test Upon completion of the excessive horizontal force test in accordance with 7.3.2, the maximum defor
