EN 13160-2-2003 Leak detection systems - Part 2 Pressure and vacuum systems《检漏系统 第2部分 压力和真空系统》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65247-1989 Aerospace nuts hexagon slotted castellated thin with MJ thread corrosion-resisting steel class 1100 MPa 425 C《航空航天 耐蚀钢制MJ螺纹的薄型槽形 冠状的六角头螺母 等级 公称抗拉强度110MPa 使用温度425℃以下》.pdf

DIN 65249-1987 Aerospace nuts hexagon with MJ thread self-locking in copper-alloy class 400 MPa 120 C《航空航天 铜合金制的MJ螺纹自锁六角头螺母 等级 400MPa 120℃》.pdf

DIN 65250-1989 Aerospace seamless internal pressure tubes in titanium and titanium alloys dimensions masses《航空航天 钛及钛合金制无缝内压力管 尺寸和质量》.pdf

DIN 65251-2013 Aerospace series - Bolts with MJ threads in titanium alloys strength class 900 MPa and 1 100 MPa - Technical specification《航空航天系列 900 MPa和1100 MPa强度的MJ螺纹钛合金螺栓 技术规范》.pdf

DIN 65252-2012 Aerospace series - Cellular elastomeric materials open and closed cells - Semi-finished products and moulded parts - Technical specification Text in German and Engli.pdf

DIN 65253-2002 L-wrench for screws with internal serration《带内细齿的螺钉用的L形扳手》.pdf

DIN 65254-2002 Hexagon insert bits - For screws with internal serrations《六角嵌入式刀头 带内细齿的螺钉》.pdf

DIN 65258-1989 Aerospace rivets 100 countersunk head aluminium and aluminium alloys metric series《航空航天 米制系列铝和铝合金100沉头铆钉》.pdf

DIN 65259-1989 Aerospace rivets 100 countersunk head reduced aluminium and aluminium alloys metric series《航空航天 米制系列铝和铝合金100沉头小头铆钉》.pdf