1、BSI Standards PublicationBS EN 13162:2012Thermal insulation products for buildings Factory made mineral wool (MW) products SpecificationBS EN 13162:2012+A1:2015BS EN 13162:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13162:2012+A1:2015. It supers
2、edes BS EN 13162:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation i
3、n its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a cont
4、ract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86752 1ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the au
5、thority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13162:2012+A1 February 2015 ICS 91.100.60 Supersedes EN
6、 13162:2012English Version Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en laine minrale (MW) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Mineralw
7、olle (MW) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o
8、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German
9、). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,
10、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
11、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13
12、162:2012+A1:2015 EEN 13162:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 4 Requirements 11 5 Test methods . 18 6 Designation code 20 7 Assessment and Verification of the Constancy of Performance (AVCP) . 2
13、1 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 23 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 26 Annex C (normative) MW multi-layered insulation products . 31
14、 Annex D (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 33 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 36 Bibliogr
15、aphy . 47 Tables Table 1 Level and classes for thickness tolerances 12 Table 2 Dimensional stability under specified temperature and humidity conditions 14 Table 3 Classes for thickness tolerances . 16 Table 4 Levels for compressibility 16 Table 5 Test methods, test specimens and conditions. 19 Tabl
16、e A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 28 Table D.1 test results . 33
17、 Table D.2 R test results . 34 Table ZA.1 Relevant clauses for factory made mineral wool and intended use 36 Table ZA.2 Systems of AVCP . 38 Table ZA.3.1 Assignment of AVCP tasks for factory made mineral wool products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 38 Table ZA.3.
18、2 Assignment of AVCP tasks for factory made mineral wool products under system 3 (see Table ZA.2) . 40 BS EN 13162:2012+A1:2015EN 13162:2012+A1:2015 (E)EN 13162:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .
19、8 4 Requirements 11 5 Test methods . 18 6 Designation code 20 7 Assessment and Verification of the Constancy of Performance (AVCP) . 21 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 23 Annex B (normative) !Produ
20、ct type determination“ (!PTD“) and factory production control (FPC) . 26 Annex C (normative) MW multi-layered insulation products . 31 Annex D (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 33 Annex
21、ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 36 Bibliography . 47 Tables Table 1 Level and classes for thickness tolerances 12 Table 2 Dimensional stability under specified temperature and humidity conditions 14 Table 3 Cl
22、asses for thickness tolerances . 16 Table 4 Levels for compressibility 16 Table 5 Test methods, test specimens and conditions. 19 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing
23、frequencies . 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 28 Table D.1 test results . 33 Table D.2 R test results . 34 Table ZA.1 Relevant clauses for factory made mineral wool and intended use 36 Table ZA.2 Systems of AVCP . 38 Table ZA.3.1 Assignment o
24、f AVCP tasks for factory made mineral wool products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 38 Table ZA.3.2 Assignment of AVCP tasks for factory made mineral wool products under system 3 (see Table ZA.2) . 40 EN 13162:2012+A1:2015 (E) 3 Table ZA.3.3 Assignment of AVCP tas
25、ks for factory made mineral wool products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 41 Figures Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3“ . 46 BS EN 13162:2012+A1:2015EN 13162:2012+A1:2015 (E)EN 13162:2012+A1:2015 (E) 4 F
26、oreword This document (EN 13162:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text o
27、r by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible
28、 for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), s
29、ee informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document supersedes !EN 13162:2012“. Compared with EN 1316
30、2:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes of some editorial and technical content and addition of informat
31、ion on some specific items such as for MW: lamella, compressibility; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. !Amendment 1 modifies EN 13162:2012 identifying those cl
32、auses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) an addition in 4.3.10.2; i) a new subclause 4.3.13; j) modification of Clause 7; k)
33、modification of Clause 8; BS EN 13162:2012+A1:2015EN 13162:2012+A1:2015 (E)EN 13162:2012+A1:2015 (E) 4 Foreword This document (EN 13162:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European
34、 Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the element
35、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essent
36、ial requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendm
37、ent is indicated in the text by tags !“. This document supersedes !EN 13162:2012“. Compared with EN 13162:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative anne
38、x on multi-layered products; c) changes of some editorial and technical content and addition of information on some specific items such as for MW: lamella, compressibility; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing
39、 Factory made products; e) changes to Annex ZA. !Amendment 1 modifies EN 13162:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an
40、addition in 3.2; h) an addition in 4.3.10.2; i) a new subclause 4.3.13; j) modification of Clause 7; k) modification of Clause 8; EN 13162:2012+A1:2015 (E) 5 l) modification of Annex B; m) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in building
41、s but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specificati
42、ons of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) prod
43、ucts Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for bu
44、ildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulati
45、on products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specific
46、ation The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fo
47、llowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
48、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13162:2012+A1:2015EN 13162:2012+A1:2015 (E)EN 13162:2012+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made mineral wool products, with or w
49、ithout facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the mat blankets, boards or slabs. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking
