1、BSI Standards PublicationThermal insulation products for buildings Factory made cellular glass (CG) products SpecificationBS EN 13167:2012+A1:2015BS EN 13167:2012+A1:2015National forewordThis British Standard is the UK implementation of EN 13167:2012+A1:2015. It supersedes BS EN 13167:2012, which is
2、 withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrust
3、ed to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible f
4、or its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86748 4ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Polic
5、y and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015BRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13167:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13167:2012Eng
6、lish Version Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en verre cellulaire (CG) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Schaumglas (CG) -
7、 Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nationa
8、l standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A versio
9、n in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Cze
10、ch Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. E
11、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13167:2012+A1
12、:2015 E2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 20 8 Marking and labelling . 21 Annex
13、A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 23 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 25 Annex C (normative) CG multi-layered insulation products . 29 Annex D (informative) Additional pro
14、perties 31 Annex E (informative) Preparation of the test specimens to measure thermal conductivity . 34 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 36 Bibliography . 47 Tables Table 1 Dimensional stability under spec
15、ified conditions 13 Table 2 Levels for compressive strength . 14 Table 3 Levels for bending strength . 15 Table 4 Levels for deformation under point load . 15 Table 5 Test methods, test specimens and conditions. 18 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level
16、of 90 % . 24 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 25 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 27 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 32 Table ZA.1 Relevant
17、clauses for factory made cellular glass and intended use 36 Table ZA.2 Systems of AVCP . 38 Table ZA.3.1 Assignment of AVCP tasks for factory made cellular glass products under system 1 for reaction to fire and system 3 (see Table ZA.2) 38 Table ZA.3.2 Assignment of AVCP tasks for factory made cellu
18、lar glass products under system 3 (see Table ZA.2) 40 BS EN 13167:2012+A1:2015 EN 13167:2012+A1:2015 (E)3 Table ZA.3.3 Assignment of AVCP tasks for factory made cellular glass products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 41 Figures Figure ZA.1 Example CE markin
19、g information of products under AVCP system 1 and system 3 46 BS EN 13167:2012+A1:2015 EN 13167:2012+A1:2015 (E)4 Foreword This document (EN 13167:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. Th
20、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of
21、the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supp
22、orts essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13167:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The sta
23、rt and finish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13167:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new nor
24、mative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items, such as point load (move towards 4.3); compressive strength (additional levels); bending strength (additional levels); d) addition of links to EN 15715, Ther
25、mal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13167:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Constructio
26、n Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.12; i) modification of Clause 7; j) modification of Clause 8; BS EN 13167:2012+A1:2015 EN 13167:2012+A1:2015 (E)5 k) modification of Annex B; l) a new Annex ZA.“ This
27、standard is one of a series of standards for thermal insulation products used in buildings but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package
28、 of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 1316
29、3, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid p
30、olyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products fo
31、r buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171,
32、 Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. Accordin
33、g to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr
34、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13167:2012+A1:2015 EN 13167:2012+A1:2015 (E)6 1 Scope This European Standard specifies th
35、e requirements for factory made cellular glass (CG) products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or slabs. Products covered by this standard are also used in prefabricated thermal insulation
36、 systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given pr
37、operty to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,50 m2K/W or a declared thermal conducti
38、vity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14305). 2 Normative references The following documen
39、ts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating p
40、roducts for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building appl
41、ications Determination of flatness EN 826:1996, Thermal insulating products for building applications Determination of compression behaviour EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/ 50 % r
42、elative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating pr
43、oducts for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short term wate
44、r absorption by partial immersion BS EN 13167:2012+A1:2015 EN 13167:2012+A1:2015 (E)7 EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long term
45、water absorption by immersion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12430, Thermal insulating products for building applications Determinat
46、ion of behaviour under point load EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and prod
47、ucts Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements P
48、art 1: Classification using data from reaction to fire tests EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burnin
49、g item EN 15715:2009, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing - Factory made products EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO 354) EN ISO 1182, Reaction to fire tests for building products Non-combustibility test (ISO 1182) EN ISO 1716, Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) (ISO 171
