1、BSI Standards PublicationBS EN 13169:2012Thermal insulation productsfor buildings Factory madeexpanded perlite board (EPB)products SpecificationBS EN 13169:2012+A1:2015BS EN 13169:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13169:2012+A1:2015. I
2、t supersedes BS EN 13169:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK partici
3、pation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions o
4、f a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86746 0ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published unde
5、r the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13169:2012+A1 February 2015 ICS 91.100.60 Super
6、sedes EN 13169:2012English Version Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en panneaux de perlite expanse (EPB) - Spcification Wrmedmmstoffe fr Gebude - Werkmig
7、hergestellte Produkte aus Blhperlit (EPB) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi
8、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official v
9、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austr
10、ia, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
11、, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN
12、national Members. Ref. No. EN 13169:2012+A1:2015 EEN 13169:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols units and abbreviated terms .9 4 Requirements 12 4.1 Genera
13、l . 12 4.2 For all applications . 12 4.3 For specific applications 14 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Testing . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) . 22 7.
14、3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 A.3 Declared values. 24 Annex B (normative) !Product type determination“ (!PTD“) and fa
15、ctory production control (FPC) . 27 Annex C (normative) Determination of the thermal conductivity in relation to moisture content 31 Annex D (normative) EPB multi-layered insulation products . 33 D.1 General . 33 D.2 Requirements 33 D.3 Test methods . 34 D.4 !Assessment and Verification of the Const
16、ancy of Performance (AVCP)“ 34 Annex E (normative) Composite insulation boards . 35 E.1 Description 35 E.2 Requirements 35 E.3 Test methods . 38 E.4 Designation code 38 BS EN 13169:2012+A1:2015EN 13169:2012+A1:2015 (E)EN 13169:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative referen
17、ces 7 3 Terms, definitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols units and abbreviated terms .9 4 Requirements 12 4.1 General . 12 4.2 For all applications . 12 4.3 For specific applications 14 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Te
18、sting . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) . 22 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of therm
19、al resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 A.3 Declared values. 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 27 Annex C (normative) Determination of the thermal conductivity in relation to moisture content 31
20、 Annex D (normative) EPB multi-layered insulation products . 33 D.1 General . 33 D.2 Requirements 33 D.3 Test methods . 34 D.4 !Assessment and Verification of the Constancy of Performance (AVCP)“ 34 Annex E (normative) Composite insulation boards . 35 E.1 Description 35 E.2 Requirements 35 E.3 Test
21、methods . 38 E.4 Designation code 38 EN 13169:2012+A1:2015 (E) 3 E.5 Factory production control. 38 E.6 !Assessment and Verification of the Constancy of Performance (AVCP)“ . 40 E.7 Marking and labelling 40 Annex F (informative) Additional properties 41 F.1 General . 41 F.2 Particular profiles 42 An
22、nex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 43 ZA.1 Scope and relevant characteristics . 43 ZA.2 Procedures for AVCP of factory made expanded perlite products 46 ZA.3 CE Marking and labelling 52 Bibliography 55 Tables
23、Table 1 Thickness tolerances . 13 Table 2 Dimensional stability under specified temperature and humidity conditions . 15 Table 3 Levels for compressive stress or compressive strength. 15 Table 4 Levels for deformation under specified compressive load and temperature 16 Table 5 Levels for water absor
24、ption by total immersion . 16 Table 6 Levels for bending strength at constant span 17 Table 7 Test methods, test specimens and conditions . 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % 25 Table B.1 Minimum number of tests for !PTD“ and minimum produ
25、ct testing frequencies 27 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 29 Table E.1 Classes for thickness tolerances 36 Table E.2 Levels of compressibility . 36 Table E.3 Test methods, test specimens and conditions 38 Table E.4 Minimum number or frequencies
26、of product testing 39 Table F.1 Test methods, test specimens, conditions and testing frequencies . 42 Table ZA.1.1 Relevant clauses for factory made expanded perlite board and intended use 44 Table ZA.1.2 Relevant clauses for factory made expanded perlite board (composites EPB) and intended use 45 T
27、able ZA.2 Systems of AVCP . 46 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded perlite board products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 47 Table ZA.3.2 Assignment of AVCP tasks for factory made expanded perlite board products under system 3 (see Tabl
28、e ZA.2) . 48 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded perlite board products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 49 BS EN 13169:2012+A1:2015EN 13169:2012+A1:2015 (E)EN 13169:2012+A1:2015 (E) 4 Figures Figure C.1 Example of a graphic rep
29、resentation of “a” 32 Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 . 54 BS EN 13169:2012+A1:2015EN 13169:2012+A1:2015 (E)EN 13169:2012+A1:2015 (E) 4 Figures Figure C.1 Example of a graphic representation of “a” 32 Figure ZA.1 Example CE marking information
30、of products under AVCP system 1 and system 3 . 54 EN 13169:2012+A1:2015 (E) 5 Foreword This document (EN 13169:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given
31、the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be
32、 the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13169:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment i
33、s indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informati
34、ve Annex ZA, which is an integral part of this standard.“ Compared with EN 13169:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered produc
35、ts; c) changes on some editorial and technical content and addition of information on some specific items; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. !Amendment 1 modif
36、ies EN 13169:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.11; i) modification of Cla
37、use 7; j) modification of Clause 8; k) modification of Annex B; BS EN 13169:2012+A1:2015EN 13169:2012+A1:2015 (E)EN 13169:2012+A1:2015 (E) 6 l) modification of D.4; m) modification of Annex E; n) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in b
38、uildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 Revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the spe
39、cifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (E
40、PS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation product
41、s for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal
42、insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products
43、Specification The reduction in energy used and emissions produced during the installed life of thermal insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organiz
44、ations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
45、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13169:2012+A1:2015EN 13169:2012+A1:2015 (E)EN 13169:2012+A1:2015 (E) 6 l) modification of D.4; m) modification of Annex E; n) a new Annex ZA.“ This standard is on
46、e of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 Revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards
47、 comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal in
48、sulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane f
49、oam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) prod
