1、BRITISH STANDARDBS EN 13229:2001 A2:2004Incorporating corrigenda September 2003, June 2006 and August 2007Inset appliances including open fires fired by solid fuels Requirements and test methodsICS 97.100.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g
2、49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13229:2001+A2:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee and comes into effect on 5 September 2001 BSI 2008ISBN 978 0 580 6
3、0011 1National forewordThis British Standard is the UK implementation of EN 13229:2001+A2:2004, incorporating corrigenda September 2003, June 2006 and August 2007. It supersedes BS EN 13229:2001+A1:2003 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated i
4、n the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by CEN corrigendum August 2
5、007 is indicated in the text by .Conflicting national standards will need either to be withdrawn or amended and these are under consideration in Technical Committee RHE/28. It is the intention of the committee to reach a decision by April 2008 on which course of action will be taken.The UK participa
6、tion in its preparation was entrusted to Technical Committee RHE/28, Domestic solid mineral fuel appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users
7、 are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationAmd. No. Date Comments14750 17 November 2003 See national foreword15493 19 January 2005 See national foreword16546 Corrigendum N
8、o. 131 October 2006 Replacement of formula (18) in A.6.2.7.1, Correction to A.6.2.1.1, A.6.2.9 and EN foreword, amendment A230 April 2008 Implementation of CEN corrigendum August 2007EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13229:2001+A2 September 2004 English version Inset appliances in
9、cluding open fires fired by solid fuels Requirements and test methods Foyers ouverts et inserts combustibles solides Exigences et mthodes dessai Kamineinstze einschlielich offene Kamine fr feste Brennstoffe Anforderungen und Prfung This European Standard was approved by CEN on 7 April 2001. CEN memb
10、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati
11、on to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
12、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slo
13、venia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN
14、 national Members. ICS 97.100.30 Incorporating corrigenda September 2003, June 2006 and August 2007 Ref. No. EN 13229:2001 EPage 2 BS EN 13229:2001+A2:2004 CONTENTS page Foreword.3 1 Scope 4 2 Normative references5 3 Terms and definitions .6 4 Materials, design and construction .15 5 Safety24 6 Perf
15、ormance26 7 Appliance instructions 31 8 Marking 34 9 Evaluation of conformity35 Annex A (normative) Test methods43 Annex B (normative) Test fuels and recommended fuels.86 Annex C (informative) Deleted Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Constr
16、uction Products Directive .92 Bibliography.98 Tables Table 1 - Categorisation of appliances4 Table 2 - Steel material types .20 Table 3 - Steel Nominal minimum wall thicknesses21 Table 4 - Cast Iron - Minimum wall thicknesses 22 Table 5 - Minimum mechanical requirements for cast iron22 Table 6 - Min
17、imum thread size designation of flow and return tappings .23 Table 7 - Minimum depth of tapping or length of thread23 Table 8 - Deleted Table 9 - Deleted Table 10 - Minimum refuelling intervals at nominal heat output .29 Table 11 - Minimum refuelling intervals or burning rate at slow or reduced comb
18、ustion30 Table 12 - Characteristics to take account of in deciding family of appliances38 Table 13 - Performance characteristics to take account of in deciding family of appliances39 Table A.1 - Uncertainty of measurement47 Table A.2 - Notations and units used in calculations66 Table B.1 - Test fuel
19、 specifications 89 Table B.2 - Typical commercial fuel specifications .90 Table ZA.1 - Relevant clauses for Inset appliances93 Table ZA.2 - System of attestation of conformity 94 Table ZA.3 - Assignment of evaluation of conformity tasks for Space heating in residential buildings with possible supply
20、 of hot water under system 3 94 Figures Figure 1 - Flue draught values 27 Figure A.1 - Example of installation of an appliance with vertical flue outlet in the test assembly . 71 Figure A.2 - Example of installation of an appliance with horizontal flue outlet in the test assembly . 72 Figure A.3 - V
21、iew of trihedron showing general arrangement of side walls and test hearth 73 Figure A.4 Details of filler pieces for trihedron rear wall 74 Figure A.5 - Cross section showing trihedron construction 75 Figure A.6 - Plan view of trihedron hearth and walls showing position of measurement points 76 Fig
22、ure A.7 - Details of thermocouples in trihedron wall 77 Figure A.8 - Construction and general arrangement of measurement section 78 Figure A.9 - Details and dimensions of measurement section for vertical flue outlet 79 Figure A.10 - Details and dimensions of measurement section for horizontal flue o
23、utlet 80 Figure A.11 - Example of test installation for appliances with water circuit 81 Figure A.12 - Dimensions of measurement section for natural draught safety test 82 Figure A.13 - Test assembly of Kachelfen or Putzfen inset appliances for heating tests 83 Figure A.14 - Test surround for Kachel
24、fen or Putzfen inset appliances . 84 Figure A.15 - Example of installation with trihedron test wall and ceiling 85 Figure B.1 - Flow chart showing selection process for tests on recommended fuels 87 Figure ZA.1 - Example CE marking information . 97 Page 3 Foreword This European Standard has been pre
25、pared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2001, and con
26、flicting national standards shall be withdrawn at the latest by December 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France,
27、 Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This document (EN 13229:2001/A1:2003) has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances“, the secretariat of which is
28、held by BSI. This Amendment to the European Standard EN 13229:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the latest by September 2003. A
29、ccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlan
30、ds, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. This document (EN 13229:2001/A2:2004) has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances”, the secretariat of which is held by BSI. This Amendment to the European Standard E
31、N 13229:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppor
32、ts essential requirements of EU Directives. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
33、an Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword to ame
34、ndment A1 Foreword to amendment A2 conflicting national standards shall be withdrawn at the latest by July 2007. BS EN 13229:2001+A2:2004Page 4 1 Scope This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), i
35、nstructions and marking together with associated test methods for type testing, residential open fires and inset appliances fired by solid fuel. This standard is applicable to hand fired appliances which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of Table 1. The surround of the applia
36、nces is integrated with the building with the exception of free-standing appliances and inset appliances which are installed into a fireplace recess or enclosure. !This standard also covers Kachelfen and Putzfen inset appliances, having nominal heat outputs up to 15 kW in accordance with category lc
37、 of table 1.“ This standard is not applicable to appliances with fan assisted combustion air. These appliances provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. They may burn either solid miner
38、al fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturers instructions. Open fireplace components such as a bottomgrate with associated firefront which the manufacturer supplies for installation into an existing heat resistant, insul
39、ated firebox are not covered by this standard. Table 1 - Categorisation of appliances a) b) c) Freestanding or inset appliances without functional modification Freestanding or inset appliances which have functional modificationInset appliances for fireplace recess and enclosure 1 appliances operatin
40、g with firedoors closed EN 13240 EN 13229 EN 13229 2 appliances operating with firedoors closed or open EN 13240 EN 13229 EN 13229 3 open fires without firedoors EN 13229 EN 13229 EN 13229 NOTE Without functional modification means a modification of the surround of an appliance, that only changes th
41、e transmission of heat, without effect on combustion. BS EN 13229:2001+A2:2004Page 5 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the public
42、ations are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication applies (including amendments). !D
43、IN 51060:1975 Refractory ceramic products and construction materials Terms and definitions“ EN 1561:1997 Founding - Grey cast irons EN 1563:1997 Founding - Spheroidal graphite cast irons EN 10025:1993 Hot rolled products of non-alloy structural steels - Technical delivery conditions EN 10027-2 :1992
44、 Designation systems for steels - Part 2 : Numerical system EN 10028-2:1992 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10029:1991 Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, sha
45、pe and mass EN 10088-2:1995 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes EN 10111:1998 Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions EN 10120:1996 Steel sheet and strip for welded g
46、as cylinders #EN 50165 Electrical equipment of non-electric appliances for household and similar purposes Safety requirements$ ISO 7-1: 1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation ISO 7-2: 2000 Pipe threads where pressure-tig
47、ht joints are made on the threads - Part 2: Verification by means of limit gauges ISO 228-1: 2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimension, tolerances and designation ISO 228-2: 1987 Pipe threads where pressure-tight joints are not made on the threads
48、- Part 2: Verification by means of limit gauges BS EN 13229:2001+A2:2004Page 6 ISO 331:1983 Coal - Determination of moisture in the analysis sample - Direct gravimetric method ISO 334:1992 Solid mineral fuels - Determination of total sulfur - Eschka method ISO 351:1996 Solid mineral fuels - Determin
49、ation of total sulfur - High temperature combustion method ISO 501:1981 Coal - Determination of the crucible swelling number ISO 562:1998 Hard coal and coke - Determination of volatile matter ISO 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method ISO 687:1974 Coke - Determination of moisture in the analysis sample ISO 1171:1997 Solid mineral fuels - Determination of ash content ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calcu
