1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58d
2、ispersion adhesivesThe European Standard EN 1324:2007 has the status of a British StandardICS 83.180; 91.100.10Adhesives for tiles Determination of shear adhesion strength of BRITISH STANDARDBS EN 1324:2007BS EN 1324:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncont
3、rolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007ISBN 978 0 580 57395 8Amendments issued since publicationAmd. No. Date Commentscontract. Users are responsible for its correct application.Compliance
4、 with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 1324:2007. It supersedes BS EN 1324:1999 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles a
5、nd other rigid tiling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1324August 2007ICS 83.180; 91.100.10 Supersedes EN
6、1324:1996 English VersionAdhesives for tiles - Determination of shear adhesion strength ofdispersion adhesivesAdhsifs pour carrelage - Dtermination de ladhrence parcisaillement dun adhsif en dispersionMrtel und Klebstoffe fr Fliesen und Platten - Bestimmungder Haftfestigkeit von Dispersionsklebstoff
7、enThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
8、erences concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member i
9、nto its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
10、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 200
11、7 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1324:2007: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative referen
12、ces 4 3 Sampling.4 4 Test conditions 4 5 Test materials.4 5.1 General4 5.2 Ceramic tiles.4 6 Apparatus .5 6.1 Template .5 6.2 Spacers .5 6.3 Weight .5 6.4 Loading machine .5 6.5 Shear test jig 6 6.6 Air circulating oven .6 7 Procedure .8 7.1 Preparation of test units .8 7.2 Initial shear adhesion st
13、rength.9 7.3 Adhesion strength after water immersion 10 7.4 Shear adhesion strength after heat ageing.10 7.5 Adhesion at elevated temperature.10 8 Evaluation and expression of results10 9 Test report 10 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) B
14、SIEN 1324:2007 (E) 3 Foreword This document (EN 1324:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen
15、t, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 1324:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement th
16、is European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni
17、ted Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 4 1 Scope This European Standard specifies the test method for the determination of the shear adhesion strength of dispersion ceramic tile adhesives. This European Standar
18、d applies to all dispersion ceramic tile adhesives for internal tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types o
19、f tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editi
20、on of the referenced document (including any amendments) applies. EN 1067, Adhesives Examination and preparation of samples for testing EN 14411, Ceramic tiles Definitions, classification, characteristics and marking EN ISO 15605, Adhesives Sampling (ISO 15605:2000) 3 Sampling Take at least 2 kg sam
21、ple of the adhesive in accordance with EN ISO 15605 and EN 1067. 4 Test conditions Standard conditions shall be (23 2) C and (50 5) % relative humidity and a speed of air in the working area less than 0,2 m/s. 5 Test materials 5.1 General Condition all test materials (adhesive etc.) for at least 24
22、h under standard conditions. The adhesive to be tested should be within its shelf life, where this is specified. 5.2 Ceramic tiles The tiles shall be checked prior to conditioning to ensure that they are new, clean and dry. The tiles used for this method shall be of: Licensed Copy: Wang Bin, ISO/EXC
23、HANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 5 type P2: glazed porous body tiles in accordance with EN 14411, group BIII, of water absorption (15 3) % by mass, with a thickness in the range 7 mm to 10 mm and a profile back pattern less than 0,25 mm thick, with
24、facial dimensions of (108 1) mm (108 1) mm. 6 Apparatus 6.1 Template A smooth non absorbent frame as shown in Figure 1. Material: PTFE or similar material with non-stick properties Hole diameter: (14,3 0,1) mm Actual coverage: (50 5) % Thickness: (1,5 0,1) mm Dimensions in millimetres Figure 1 Templ
25、ate 6.2 Spacers Spacer rods 0,8 mm diameter, approximately 40 mm long. 6.3 Weight A weight of less than 100 mm 100 mm cross sectional area capable of exerting a force of (70 0,15) N. 6.4 Loading machine A test machine with suitable capacity and sensitivity for the test and with a variable testing sp
26、eed. The machine shall be capable of applying the load to the tile through a suitable jig (see 6.5). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 6 6.5 Shear test jig A suitable jig used for converting the compressive or tensile
27、load exerted by the testing machine into a shear force. Examples of suitable jigs are shown in Figures 2 and 3. 6.6 Air circulating oven An air circulating oven capable of controlling the temperature to within 3 C. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled
28、 Copy, (c) BSIEN 1324:2007 (E) 7 Dimensions in millimetres Key 1 hardened insert 2 adjustable jaws from 12 mm to 45 mm Figure 2 Jig for shear adhesion test using a vertical compression machine Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:
29、2007 (E) 8 Dimensions in millimetres Key 1 test unit 2 pressure plate 3 stops 4 adapter 5 “U“ section frame 6 box section frame Figure 3 Jig for shear adhesion test using a tensile machine 7 Procedure 7.1 Preparation of test units Each test unit shall be prepared with two type P2 tiles. Draw a strai
30、ght line on the porous side of one tile 6 mm from the tile edge. (To serve as a guide in overlapping of tile as explained below.) Place the template (see Figure 1) over the unglazed back of the first test tile. Trowel sufficient adhesive across the template and then screed clean so as to neatly and
31、completely fill the holes in the template. Carefully remove the template vertically (see Figure 4). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 9 Place spacers rods 0,8 mm thick at each corner of the first tile, approximately 20
32、 mm over the tile. After 2 min place a second standard test tile over the coated tile. Place it offset to provide an overlap between tiles with displacement of 6 mm, using the previously scribed line as a guide and ensuring that the edges of the tiles are parallel. Place the test units on a plane su
33、rface and carefully load with (70 0,15) N for 3 min. Carefully remove the spacer rods, without disturbing the relative position of the tiles in the test units. A total of ten test units are required for each test. Condition the units according to the test requirements. Dimensions in millimetres Key
34、1 spacer rods (6.2) 2 ceramic test tile 108 mm 108 mm 3 direction of application of load 4 guide line 5 adhesive Figure 4 Preparation of tile test units 7.2 Initial shear adhesion strength Condition ten test units in standard test conditions (see Clause 4) for 14 days. After conditioning has been co
35、mpleted, place the test units in a shear test jig (see 6.5) and apply a shear force by moving the crosshead at a speed of 5 mm/min until failure occurs. Report the results in Newtons. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E)
36、10 7.3 Adhesion strength after water immersion Condition ten test units in standard test conditions (see Clause 4) for 7 days, then immerse in water at ambient temperature for 7 days. Remove the units and wipe with a cloth and test them as described in 7.2. Report the results in Newtons. NOTE This t
37、est is only for dispersion adhesives used in internal installations subject to wet conditions. 7.4 Shear adhesion strength after heat ageing Condition ten test units in standard conditions (see Clause 4) for 14 days and then place them in an air-circulating oven at (70 3) C for a further 14 days, en
38、suring that air is free to circulate around each test unit. Condition the units for a further 24 h in standard conditions and test them as described in 7.2. Report the results in Newtons. 7.5 Adhesion at elevated temperature Use the procedure described in 7.4 but test the tile adhesion within 1 min
39、of removal of the test unit from the air circulating oven. Report the results in Newtons. 8 Evaluation and expression of results Divide the individual values in Newtons by the conventional area (5 508 mm2) of adhesive contact. The individual values are quoted to 0,1 N/mm2. The shear adhesion strengt
40、h is determined in the following way: determine the mean of ten values; discard the values falling outside the range of 20 % from the mean value; if five or more values remain, determine the new mean value; if less than five values remain, repeat the test. 9 Test report The test report shall provide
41、 the following information: a) number and year of issue of this European Standard, i.e. EN 1324:2007; b) place, date and time of sampling; c) type of adhesive, commercial designation and manufacturer; d) identification of test sample; e) handling and storage of samples before testing; f) test condit
42、ions; Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIEN 1324:2007 (E) 11 g) date of testing; h) test results (individual and mean values and the mode of failure); i) shear adhesion strength for each condition in N/mm2; j) any other factor that coul
43、d have influenced the result. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSIBS EN BSILicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 28/02/2008 02:35, Uncontrolled Copy, (c) BSI389 Chiswick High RoadLondonW4 4AL1324:2007BSI British Standard
44、s InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standard
45、s should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical co
46、mmittee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOr
47、ders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, i
48、t is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporte
49、rs Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)
