1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13523-11:2011Coil coated metals TestmethodsPart 11: Resistance to solvents (rubbingtest)BS EN 13523-11:2011 BRITISH STANDARDNational forewordThis British Standard is the UK
2、 implementation of EN 13523-11:2011.It supersedes BS EN 13523-11:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee STI/27, Paint systems for metallic substrates.A list of organizations represented on this committee can beobtained on request to its se
3、cretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 70111 5ICS 25.220.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publi
4、shed under the authority of theStandards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate Text affectedBS EN 13523-11:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13523-11 June 2011 ICS 25.220.60 Supersedes EN 13523-11:2004English Version Coil coated
5、metals - Test methods - Part 11: Resistance to solvents (rubbing test) Tles prlaques - Mthodes dessai - Partie 11: Rsistance aux solvants (essai de frottement) Bandbeschichtete Metalle - Prfverfahren - Teil 11: Bestndigkeit gegen Lsemittel (Reibtest) This European Standard was approved by CEN on 4 M
6、ay 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta
7、ined on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CE
8、N-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
9、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of
10、exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-11:2011: EBS EN 13523-11:2011EN 13523-11:2011 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms and definitions . 54 Principle 55 Reagents and material 56 Apparatus . 57 Samp
11、ling . 68 Test panels . 69 Procedure . 610 Expression of results 611 Precision . 612 Test report 7Bibliography 8BS EN 13523-11:2011EN 13523-11:2011 (E) 3 Foreword This document (EN 13523-11:2011) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is
12、held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. This document supersedes EN 13523-
13、11:2004. The main technical changes are: A note to 6.1 has been introduced giving an example for the weight load on the artificial finger. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respon
14、sible for identifying any or all such patent rights. EN 13523, Coil coated metals Test methods, consists of the following parts: Part 0: General introduction and list of test methods Part 1: Film thickness Part 2: Specular gloss Part 3: Colour difference Instrumental comparison Part 4: Pencil hardne
15、ss Part 5: Resistance to rapid deformation (impact test) Part 6: Adhesion after indentation (cupping test) Part 7: Resistance to cracking on bending (T-bend test) Part 8: Resistance to salt spray (fog) Part 9: Resistance to water immersion Part 10: Resistance to fluorescent UV radiation and water co
16、ndensation Part 11: Resistance to solvents (rubbing test) Part 12: Resistance to scratching Part 13: Resistance to accelerated ageing by the use of heat Part 14: Chalking (Helmen method) Part 15: Metamerism Part 16: Resistance to abrasion BS EN 13523-11:2011EN 13523-11:2011 (E) 4 Part 17: Adhesion o
17、f strippable films Part 18: Resistance to staining Part 19: Panel design and method of atmospheric exposure testing Part 20: Foam adhesion Part 21: Evaluation of outdoor exposed panels Part 22: Colour difference Visual comparison Part 23: Colour stability in humid atmospheres containing sulfur dioxi
18、de Part 24: Resistance to blocking and pressure marking Part 25: Resistance to humidity Part 26: Resistance to condensation of water Part 27: Resistance to humid poultice (Cataplasm test) Part 29: Resistance to environmental soiling (Dirt pick-up and striping) According to the CEN/CENELEC Internal R
19、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
20、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13523-11:2011EN 13523-11:2011 (E) 5 1 Scope This part of EN 13523 specifies the procedure for evaluating the degree of curing by determining the resistance of an organic c
21、oating on a metallic substrate to solvents. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame
22、ndments) applies. EN 13523-0:2001, Coil coated metals Test methods Part 0: General introduction and list of test methods EN 23270, Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing (ISO 3270:1984) 3 Terms and definitions For the purposes of this do
23、cument, the terms and definitions given in EN 13523-0:2001 apply. 4 Principle The surface of the organic coating is rubbed with an absorbent material soaked in a specified solvent at a specified load. 5 Reagents and material 5.1 Absorbent material Cotton wool of sufficient quantity to stay wet for t
24、he duration of the test and to prevent contact between the test panel and the artificial finger used under the conditions of the test. Other materials such as textile or felt pads may be used but will give different results. Materials with a hard surface shall not be used. 5.2 Solvent Butanone (meth
25、yl ethyl ketone) shall be used if not otherwise specified. 6 Apparatus 6.1 A device with an artificial finger with a circular contact area between 100 mm and 200 mm of contact surface, capable of making longitudinal back and forth strokes (double strokes) under a pressure of (0,05 0,01) MPa. The len
26、gth of the strokes shall be at least 75 mm. NOTE For example, for a pressure of 0,05 MPa and a contact area of 100 mm, a mass of 0,5 kg is required. BS EN 13523-11:2011EN 13523-11:2011 (E) 6 7 Sampling Shall be in accordance with EN 13523-0. 8 Test panels Shall be in accordance with EN 13523-0. The
27、test panel shall be of sufficient size that the area wetted during the test is at least 20 mm from the edges. 9 Procedure 9.1 Test conditions Coatings shall not be tested until they have cooled down to ambient temperature. For more accurate measurements, as required for instance in case of dispute,
28、the temperature shall be (23 2) C and the relative humidity (50 5) %, in accordance with EN 23270. 9.2 Determination Cover the whole surface area of the artificial finger (6.1) with absorbent material (5.1). Soak the absorbent material with the solvent (5.2). Place the tip of the artificial finger o
29、n the test panel avoiding contact with the edges. Start the movement for the specified number of strokes. The rubbing speed shall be approximately 1 s per double stroke and the movement shall be continuous. The absorbent material shall remain wet for the duration of the test. After the specified num
30、ber of strokes, the test panel shall be evaluated to verify whether or not the organic coating under test has been removed and the material underneath can be seen. Avoid any abrasive contamination that will score the panel surface and invalidate the result of the test. The evaluation area is obtaine
31、d by disregarding the characteristic length of the contact area on both extremes of the tested surface. NOTE The judgement of the test result can depend upon the experience of the operator. 10 Expression of results The result shall be expressed as a pass or fail at the specified number of strokes. 1
32、1 Precision No precision data are available. BS EN 13523-11:2011EN 13523-11:2011 (E) 7 12 Test report The test report shall contain at least the following information: a) all details necessary to identify the product tested, including substrate; b) a reference to this part of EN 13523 (EN 13523-11);
33、 c) the number of double strokes; d) the solvent used; e) the result of the test, as indicated in Clause 9; f) any deviation from the test method specified; g) the date of the test. BS EN 13523-11:2011EN 13523-11:2011 (E) 8 Bibliography EN 1396, Aluminium and aluminium alloys Coil coated sheet and s
34、trip for general applications Specifications EN 10169, Continuously organic coated (coil coated) steel flat products Technical delivery conditions This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications
35、, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)
36、20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambigu
37、ity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscr
38、ibers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreig
39、n standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise reques
40、ted.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its produ
41、cts and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (
42、0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the pub
43、lications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written p
44、ermission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email:
