1、BRITISH STANDARDBS EN14035-27:2003IncorporatingCorrigendum No. 1Fireworks Part 27: Rockets Specification and test methodsThe European Standard EN 14035-27:2003 has the status of a British StandardICS 71.100.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g5
2、0g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14035-27:2003This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 August 2003 BSI 14 March 2006ISBN 0 580 42426 XNational foreword
3、This British Standard is the official English language version of EN 14035-27:2003, including Corrigendum January 2005. It partially supersedes BS 7114-2:1988 and BS 7114-3:1988 which have been declared obsolescent.NOTE BS 7114-2:1988 and BS 7114-3:1988 are cited in The Fireworks (Safety) Regulation
4、s 1997.The UK participation in its preparation was entrusted to Technical Committee CII/47, Fireworks, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK in
5、terests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Additional informationThe United Kingdom, as a member of CEN, is obliged to publishEN 14035-27:200
6、3 as a British Standard and to incorporate the corrigendum EN 14035-27/AC:2005. However, attention is drawn to the fact that the United Kingdom voted against the approval of the draft corrigendum.The main reason for this disapproval is that BSI Committee CII/47 considers that Figure 5 in 8.6, as cha
7、nged by the corrigendum, is still inaccurate because various elements of the figure are too small. The BSI Committee recommends that if a transparent template is used to check type sizes on labelling, the template should be accurately produced so that the height of each character and symbol on the t
8、emplate is within +0.10mm of the relevant minimum height specified in this standard.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspon
9、dence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of its
10、elf confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 36, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments
11、issued since publicationAmd. No. Date Comments15902Corrigendum No. 1March 2006 Addition to the national foreword and implementation of CEN corrigendum January 2005 (indicated by sideline)EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14035-27May 2003ICS 71.100.30English versionFireworks - Part 27
12、: Rockets - Specification and test methodsArtifices de divertissement - Partie 27: Fuses -Spcifications et mthodes dessaiFeuerwerkskrper - Teil 27: Raketen - Anforderungen undPrfverfahrenThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELE
13、C Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN mem
14、ber.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are
15、the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN
16、DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2003 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-27:2003 EIncorporating corrigendum January 2005ContentspageForeword31 Sco
17、pe 52 Normative references 53 Terms and definitions64 Construction.64.1 Means of ignition .64.2 Attachment of initial fuse64.3 Protection of initial fuse 64.4 Materials of firework case.74.5 Integrity.74.6 Net explosive content74.7 Mass of report and/or bursting charge74.8 Means for stabilization of
18、 flight74.9 Vertical Stability .75 Performance .85.1 Initial fuse .85.2 Principal effect .85.3 Height of explosions and bursting.85.4 Functioning.85.5 Stabilization of flight85.6 Burning matter .85.7 Debris 85.8 Angle of flight.85.9 Rocket motor967 Minimum labelling requirements97.1 General97.2 Type
19、 name and category.97.3 Safety information .97.4 Name and address and telephone number of manufacturer or distributor or importer.107.5 Reference to this standard117.6 Printing117.7 Marking of very small rockets 117.8 Additional information on the primary pack (if applicable).118 Test methods128.1 A
20、ttachment of protruding fuse (type test and batch test) .128.2 Vertical stability (type test) .128.3 Performance (type test and batch test) .148.4 Determination of net explosive content and mass of report and/or bursting charge (type test) 178.5 Side ignition of initial fuse (type test)178.6 Labelli
21、ng (type test and batch test) .18Annex A (normative) Type testing19Annex B (normative) Batch testing 28Annex C (normative) Method for determination of smouldering rate of cigarette 32Annex D (informative) A-deviations33Page 2EN 1403527:2003Primary pack or selection pack.9ForewordThis document (EN 14
22、035-27:2003) has been prepared by Technical Committee CEN/TC 212 “Fireworks”, thesecretariat of which is held by NEN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2003, and conflicting n
23、ational standards shall be withdrawn at the latestby November 2003.This European Standard is one of a series of standards as listed below.EN 14035-1, Fireworks - Part 1: Terminology.EN 14035-2, Fireworks - Part 2: Categorisation.prEN 14035-3, Fireworks - Part 3: Aerial wheels - Specification and tes
24、t methods.EN 14035-4, Fireworks - Part 4: Bangers and banger batteries - Specification and test methods.prEN 14035-6, Fireworks - Part 6: Bengal flames - Specification and test methods.prEN 14035-7, Fireworks - Part 7: Bengal matches - Specification and test methods.prEN 14035-8, Fireworks - Part 8:
25、 Bengal sticks - Specification and test methods.prEN 14035-9, Fireworks - Part 9: Crackling granules - Specification and test methods.prEN 14035-10, Fireworks - Part 10: Double bangers - Specification and test methods.EN 14035-12, Fireworks - Part 12: Flash bangers and flash banger batteries - Speci
26、fication and test methods.prEN 14035-13, Fireworks - Part 13: Flash pellets - Specification and test methods.EN 14035-15, Fireworks - Part 15: Fountains - Specification and test methods.prEN 14035-17, Fireworks - Part 17: Ground spinners - Specification and test methods.prEN 14035-18, Fireworks - Pa
27、rt 18: Hand-held fountains - Specification and test methods.EN 14035-19, Fireworks - Part 19: Hand-held sparklers - Specification and test methods.prEN 14035-20, Fireworks - Part 20: Jumping crackers - Specification and test methods.prEN 14035-21, Fireworks - Part 21: Jumping ground spinners - Speci
28、fication and test methods.prEN 14035-22, Fireworks - Part 22: Mines - Specification and test methods.EN 14035-23, Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods.prEN 14035-24, Fireworks - Part 24: Novelty matches - Specification and test methods.prEN 14035-25, Firework
29、s - Part 25: Party poppers - Specification and test methods.Page 3EN 1403527:2003prEN 14035-5, Fireworks - Part 5: Batteries and combinations - Specification and test methods.EN 14035-27, Fireworks - Part 27: Rockets - Specification and test methods.prEN 14035-28, Fireworks - Part 28: Roman candles
30、- Specification and test methods.prEN 14035-29, Fireworks - Part 29: Serpents - Specification and test methods.prEN 14035-33, Fireworks - Part 33: Spinners - Specification and test methods.EN 14035-34, Fireworks - Part 34: Table bombs - Specification and test methods.prEN 14035-35, Fireworks - Part
31、35: Throwdowns - Specification and test methods.prEN 14035-36, Fireworks - Part 36: Wheels - Specification and test methods.prEN 14035-37, Fireworks - Part 37: Whistlers - Specification and test methods.In this European Standard the annexes A to C are normative and the annex D is informative and con
32、tains nationaldeviations due to regulations, the alteration of which is for the time being outside the competence of theCEN/CENELEC member.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard:
33、Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.Page 4EN 1403527:2003prEN 14035-31, Fireworks - Part 31: Shell-in-mortars - Speci
34、fication and test methods.prEN 14035-38, Fireworks - Part 38: Shot tubes - Specification and test methods.1 ScopeThis European Standard specifies requirements for the construction, performance, primary packaging and labellingof rockets and the corresponding test methods. It is applicable to firework
35、s which are classified as rockets incategories 2 and 3 in EN 14035-2.It is not applicable to rockets containing pyrotechnic composition that includes any of the following substances: arsenic or arsenic compounds; mixtures containing a mass fraction of chlorates greater than 80 %; mixtures of chlorat
36、es with metals; mixtures of chlorates with red phosphorus; mixtures of chlorates with potassium hexacyanoferrate(II); mixtures of chlorates with sulfur; mixtures of chlorates with sulfides; lead or lead compounds; mercury compounds; white phosphorus; picrates or picric acid; potassium chlorate with
37、a mass fraction of bromates greater than 0,15 %; sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; zirconium with a particle size of less than 40 m.Schemes for type testing of rockets and batch testing of rockets are specified in annex A and annex B respecti
38、vely.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or rev
39、isions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 14035-1:2003, Fireworks Part 1: Terminology.EN 14035-2, Fireworks Part 2
40、: Categorisation.EN ISO 845, Cellular plastics and rubbers Determination of apparent (bulk) density (ISO 845:1988).EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (ShoreHardness) (ISO 868:1985).(including Technical Corrigendum 1:2001)Page 5EN 1403527:20
41、03EN ISO 2439, Flexible cellular polymeric materials Determination of hardness (indentation technique).ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptancequality limit (AQL) for lot-by-lot inspection.3 Terms and definitionsFor the purposes of t
42、his European Standard, the terms and definitions given in EN 14035-1 together with thefollowing apply.3.1rocketconsists of pressed gas-producing pyrotechnic composition (the propellant charge) in a tube, equipped with stick(s)or other means for stabilization of flight, and designed to be propelled l
43、inearly into the air. The rocket can alsocontain other pyrotechnic compositions, such as bursting charge or report charges, and/or pyrotechnic unitsNOTE In EN 14035-2, rockets are classified as follows: brief description: tube containing pyrotechnic composition and/or pyrotechnic units, equipped wit
44、h stick(s) or other meansfor stabilization of flight, and designed to be propelled into the air; principal effects: ascent, with or without additional visual and/or aural effects, and production of visual and/or aural effectsin the air.4 Construction4.1 Means of ignitionThe means of ignition of a ro
45、cket shall be identified by a protruding fuse.Conformity to this requirement shall be verified by visual examination.4.2 Attachment of initial fuseThe attachment of the protruding fuse to the rocket shall be secure when tested in accordance with 8.1.4.3 Protection of initial fuse4.3.1 GeneralThe ini
46、tial fuse of a category 2 rocket shall be protected in one of the ways specified in 4.3.2, 4.3.3 or 4.3.4.The initial fuse of a category 3 rocket shall be protected in the way specified in 4.3.2.4.3.2 Initial fuse protected by fuse coverAn orange fuse cover shall be in place over the initial fuse.Co
47、nformity to this requirement shall be verified by visual examination.Conformity to this requirement shall be verified by visual examination.Page 6EN 1403527:20034.3.3 Initial fuse protected by primary pack or selection packThe rocket shall be contained in a primary pack or selection pack conforming
48、to clause 6 4.3.4 Protruding fuse designed to resist side ignitionWhen tested in accordance with 8.5, the protruding fuse shall not ignite.4.4 Materials of firework caseThe body of the firework case, except the tube containing the propellant charge, shall be made of paper, cardboardor plastics. The
49、tube containing the propellant charge shall be made of cardboard, plastics or sheathed aluminium.Conformity to these requirements shall be verified by visual examination.4.5 Integrity4.5.1 Firework caseThere shall be no holes, splits, dents or bulges in the body of the firework case.Conformity to this requirement shall be verified by visual examination.4.5.2 RocketWhen tested in accordance with A.5, the mass of loose pyrotechnic composition shall not exceed 100 mg.4.6 Net explosive contentWhen determined in accor
