1、BRITISH STANDARD BS EN 1504-4:2004 Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 4: Structural bonding The European Standard EN 1504-4:2004 has the status of a British Standard ICS 91.080.40 BS E
2、N 1504-4:2004 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 26 January 2005 BSI 26 January 2005 ISBN 0 580 45355 3 National foreword This British Standard is the official English language version of EN 1504-4:2004. EN 1504-4 is a candidate
3、 “harmonized” European Standard and fully takes into account the requirements of the European Commission mandate M/128, Products related to concrete, mortar and grout, given under the EU Construction Products Directive (89/106/EEC), and is intended to lead to CE marking. The date of applicability of
4、 EN 1504-4:2004 as a “harmonized” European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an announcement in the Official Journal of the European Communities. The Commission in consultation with Member States has agreed a transition period for th
5、e co-existence of “harmonized” European Standards and their corresponding national standard(s). It is intended that this period will comprise a period, usually nine months, after the date of availability of the European Standard, during which any required changes to national regulations are to be ma
6、de, followed by a further period, usually of 12 months, for the implementation of CE marking. At the end of this co-existence period, the national standard(s) will be withdrawn. EN 1504-4:2004 is the subject of transitional arrangements agreed under the Commission mandate. In the UK, there are no co
7、rresponding national standards of national origin. The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to: A list of organizations represented on this subcomm
8、ittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “
9、Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from lega
10、l obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Su
11、mmary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Com
12、mentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN15044 November2004 ICS91.080.40 Englishversion Productsandsystemsfortheprotectionandrepairofconcrete structuresDefinitions,requirements,qualitycontroland evaluationofconformityPart4:Structuralbonding Produitsetsystmespourlaprotectionetlarparation
13、de structuresenbtonDfinitions,prescriptions,matrisede laqualitetvaluationdelaconformitPartie4:Collage structural ProdukteundSystemefrdenSchutzunddie InstandsetzungvonBetontragwerkenDefinitionen, Anforderungen,QualittsberwachungundBeurteilungder KonformittTeil4:KleberfrBauzwecke ThisEuropeanStandardw
14、asapprovedbyCENon23April2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplication
15、totheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersaret
16、henationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARD
17、IZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN15044:2004:EEN 1504-4:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative referen
18、ces 5 3 Terms and definitions .6 4 Performance characteristics for intended uses .7 5 Requirements.9 6 Sampling.13 7 Evaluation of conformity.13 8 Marking and labelling 14 Annex A (informative) Special applications15 Annex B (informative) Release of dangerous substances16 Annex C (informative) Minim
19、um frequency of testing for factory production control.17 Annex ZA (informative) Clauses addressing the provisions of EU Construction Products Directive18 EN 1504-4:2004 (E) 3 Foreword This document (EN 1504-4:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”,
20、 the secretariat of which is held by DIN. It has been developed by sub-committee 8 “Products and systems for the protection and repair of concrete structures” (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or b
21、y endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by August 2006. This Part 4 of EN 1504 does not supersede any other document. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr
22、ee Trade Association, and supports essential requirements of EU Construction Products Directive (89/106/EC). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This Part 4 of EN 1504 includes an Informative Annex A dealing with special applic
23、ations and an Informative Annex B dealing with release of dangerous substances. This Part of this European Standard is one of the Parts of this Standard on products and systems for the repair and protection of concrete structures, the other Parts are listed below: EN 1504-1, Products and systems for
24、 the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions prEN 1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conf
25、ormity - Part 2: Surface protection systems for concrete prEN 1504-3, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair prEN 1504-5, Products and systems f
26、or the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection prEN 1504-6, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluatio
27、n of conformity - Part 6: Anchoring of reinforcing steel bar prEN 1504-7, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection EN 1504-8 Products and systems fo
28、r the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity ENV 1504-9:, Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Qual
29、ity control and evaluation of conformity - Part 9: General principles for the use of products and systems EN 1504-10, Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of pro
30、ducts and systems and quality control of the works EN 1504-4:2004 (E) 4 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finlan
31、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 1504-4:2004 (E) 5 1 Scope This Part 4 of EN 1504 specifies requirements for the identificat
32、ion, performance (including durability) and safety of structural bonding products and systems to be used for the structural bonding of strengthening materials to an existing concrete structure, including: 1) The bonding of external plates of steel or other suitable materials (e.g. fibre reinforced c
33、omposites) to the surface of a concrete structure for strengthening purposes, including the laminating of plates in such applications. 2) The bonding of hardened concrete to hardened concrete, typically associated with the use of precast units in repair and strengthening. 3) The casting of fresh con
34、crete to hardened concrete using an adhesive bonded joint where it forms a part of the structure and is required to act compositely. The performance requirements in this Part of this Standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic
35、 use, nor do they cover specialised circumstances such as accidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirements will apply. 2 Normative references The following referenced documents are indispensable for the application of this document. For dat
36、ed references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1504-1, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of
37、 conformity - Part 1: Definitions EN 1504-8, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity ENV 1504-9, Products and systems for the protection
38、and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 9: General principles for the use of products and systems EN 1766, Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for tes
39、ting EN 1767, Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis EN 1770, Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion EN 1799, Products and s
40、ystems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface EN 12188, Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesio
41、n steel-to-steel for characterisation of structural bonding agents EN 12189, Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time EN 1504-4:2004 (E) 6 EN 12190, Products and systems for the protection and repair of concrete structures
42、- Test methods - Determination of compressive strength of repair mortar EN 12192-2, Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents EN 12614, Products and systems for the protection and rep
43、air of concrete structures - Test methods - Determination of glass transition temperatures of polymers EN 12615, Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength EN 12617-1, Products and systems for the protection and re
44、pair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) EN 12617-3, Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for stru
45、ctural bonding agents EN 12618-2, Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength EN 12636, Products and systems for the protec
46、tion and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete EN 13412, Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression EN 13501-1, Fire classification of constru
47、ction products and building elements - Part 1: Classification using test data from reaction to fire tests EN 13733, Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents EN ISO 178, Plastics - Determin
48、ation of flexural properties (ISO 178:200 1) EN ISO 3451-1, Plastics - Determination of ash - Part 1: General methods (ISO 345 1- 1: 1997) EN ISO 9514, Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing (ISO 95 14: 1992) EN ISO 11358, Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358: 1997) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1504-1, EN 1504-8an
