EN 1705-1996 en Plastics Piping Systems - Thermoplastics Valves - Test Method for the Integrity of a Valve After an External Blow《塑料管道系统 热塑性塑料阀门 外部鼓风后阀门完好性测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 1333-1977 Interchangeable bushings for quick-acting chuck heads《带快速卡盘封头的可互换轴衬》.pdf

CSN 24 1334-1977 Interchangeable free bushings for quick-acting chuck heads《用于快速卡盘封头的可互换自由轴衬》.pdf

CSN 24 1344-1977 Interchangeable fastened bushings with taper for drill chucks《用于钻夹头的带锥可互换固定轴衬》.pdf

CSN 24 1345-1977 Interchangeable fastened bushings with square-end tool hollow《带方尾工具凹洞的可互换固定轴衬》.pdf

CSN 24 1400-1961 Milling arbours and reduction sleeves Survey《铣削荫棚和减速套筒 调查》.pdf

CSN 24 1401-1961 Milling arbours Technical code《铣加工辊轴 技术规范》.pdf

CSN 24 1402-1971 Reduction sleeves for chucking of mill cutters and miling arbours with taper shanks Technical regulations《用于铣刀夹具及带锥柄的铣辊轴的过渡套 技术规范》.pdf

CSN 24 1403-1985 The dead-length type spring collet with taper 7 24 for clamping tools with cylindrical shank Basic dimensions《带7号锥度的推式弹簧夹头 带圆柱模柄的24号钳拉工具 基本尺寸》.pdf

CSN 24 1411-1961 Milling arbours with steep taper shanks for end mills《立铣刀用带大锥度的铣加工辊轴》.pdf