1、BRITISH STANDARD BS EN 1709:2004 Safety requirements for cableway installations designed to carry persons Precommissioning inspection, maintenance, operational inspection and checks The European Standard EN 1709:2004 has the status of a British Standard ICS 45.100 BS EN 1709:2004 This British Standa
2、rd was published under the authority of the Standards Policy and Strategy Committee on 3 November 2004 BSI 3 November 2004 ISBN 0 580 44669 7 National foreword This British Standard is the official English language version of EN 1709:2004. The UK participation in its preparation was entrusted to Tec
3、hnical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may
4、 be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users a
5、re responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, an
6、d keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright notice displayed in this docume
7、nt indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN1709 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsPrecommissioninginspection,maintenance
8、, operationalinspectionandchecks Prescriptionsdescuritpourlesinstallationscbles transportantdespersonnesExamenprobatoire, maintenance,contrlesenexploitatation SicherheitsanforderungenfrSeilbahnenfrden PersonenverkehrErprobung,Instandhaltung, Betriebskontrollen ThisEuropeanStandardwasapprovedbyCENon2
9、3August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecre
10、tariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandar
11、dsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEURO
12、PENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1709:2004:EEN 1709:2004 (E) 2 Contents Page Foreword .4 1 Scope6 2 Normative references.6 3 Terms and d
13、efinitions 7 4 General requirements.8 4.1 Application of this standard.8 4.2 Safety principles.8 4.2.1 General8 4.2.2 Hazard scenarios8 4.2.3 Safety measures.8 5 Verifications and pre-commissioning inspection .9 5.1 Submission of the documents for the installation (design, implementation) including
14、verification by calculation9 5.2 Submission of verification of the suitability of materials and components 9 5.3 Pre-commissioning inspection9 5.3.1 General9 5.3.2 Verification of conformity of the installation with the submitted documents9 5.3.3 Check and operating test of the individual components
15、, their operation with each other and within their local environment 9 5.3.4 Operating test.10 5.3.5 Report on the pre-commissioning inspection.10 5.4 Delivery of required documents to the operator.11 5.5 Certification of readiness for acceptance 11 6 Maintenance .11 6.1 General11 6.2 Servicing.12 6
16、.3 Inspection .12 6.3.1 General12 6.3.2 First inspection of construction works .13 6.3.3 Monthly inspections.13 6.3.4 Inspection in the case of intermittent operation .13 6.3.5 Annual inspections 14 6.3.6 Special multiannual inspections16 6.3.7 Special inspections16 6.4 Repair18 6.5 Renewal of const
17、ruction works .18 7 Operational inspections and checks .18 7.1 General18 7.2 Daily inspection and test run prior to opening to the public18 7.2.1 General18 7.2.2 Daily inspections18 7.2.3 Daily test run 19 7.3 Checks during operation20 7.4 Operational inspections and test runs after exceptional even
18、ts20 8 Maintenance and operational inspection documentation 20 EN 1709:2004 (E) 3 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons. 21 EN 1709:2004 (E) 4 Foreword T
19、his document (EN 1709:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text o
20、r by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU
21、 Directives. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. This document forms part of the standards programme approved by the CEN Technical Board on safety requirements for cableway installations designed to carry persons. This programme
22、comprises the following standards: 1) Safety requirements for cableway installations designed to carry persons Terminology. 2) Safety requirements for cableway installations designed to carry persons - General requirements. 3) Safety requirements for cableway installations designed to carry persons
23、Calculations. 4) Safety requirements for cableway installations designed to carry persons Ropes. 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices. 6) Safety requirements for cableway installations designed to carry persons Drive systems and other mecha
24、nical devices. 7) Safety requirements for cableway installations designed to carry persons Carriers. 8) Safety requirements for cableway installations designed to carry persons Electrical equipment other than for drive systems. 9) Safety requirements for cableway installations designed to carry pers
25、ons - Civil engineering works. 10) Safety requirements for cableway installations designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks. 11) Safety requirements for cableway installations designed to carry persons Recovery and evacuation. 12) Safet
26、y requirements for cableway installations designed to carry persons Operation. 13) Safety requirements for cableway installations designed to carry persons - Quality assurance. Together these form a series of standards regarding design, production, maintenance and operation of all installations for
27、cableway installations designed to carry persons. In respect of ski-tows, the drafting of this document has been guided by the works of the International Organisation for transportation by rope (OITAF). EN 1709:2004 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards orga
28、nizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, S
29、lovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 1709:2004 (E) 6 1 Scope This document specifies the safety requirements applicable to the pre-commissioning inspection, maintenance and operational inspections and checks of cableway installations designed to carry persons. This standard
30、 is applicable to the various types of installations and takes into account their environment. It also includes requirements relating to accident prevention and to worker protection. It does not apply to installations for the transportation of goods by rope or to inclined lifts. This document does n
31、ot deal with acceptance tests prior to opening to the public. The provisions of clause 5 apply to the measures to be taken prior to the initial commissioning and clauses 6 and 7 concern those to be taken during operation. 2 Normative references The following referenced documents are indispensable fo
32、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ENV 1090-1, Execution of steel structures - Part 1: General rules and rules for buildings. prEN 1907:200
33、4, Safety requirements for cableway installations designed to carry person - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons - Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons - Recovery and evacuatio
34、n. EN 12397, Safety requirements for cableway installations designed to carry persons - Operation. EN 12408, Safety requirements for cableway installations designed to carry persons - Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons - Ropes - Pa
35、rt 1: Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6-s
36、trand hauling, carrying-hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixing. EN 12927-5, Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, install
37、ation and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Calculation, repair and maintenance. EN 12927-8, Safet
38、y requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT). EN 1709:2004 (E) 7 EN 12929-1, Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements applicable to all installations. EN
39、 12929-2, Safety requirements for cableway installations designed to carry persons - General provisions - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons - Calculat
40、ions. EN 13107, Safety requirements for cableway installations designed to carry persons - Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment. EN 13243,Safety requirements for cableway installatio
41、ns designed to carry persons - Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 137
42、96-2, Safety requirements for cableway installations designed to carry persons - Carriers - Part 2: Slipping resistance tests for grips. prEN 13796-3, Safety requirements for passenger transportation by rope - Carriers - Part 3: Fatigue testing. 3 Terms and definitions For the purposes of this docum
43、ent, the terms and definitions given in prENV 1907:2004 and the following apply. 3.1 pre-commissioning inspection all of the operations required for confirming the readiness of the installation for acceptance 3.2 inspection all of the operations intended for ascertaining and assessing the actual con
44、dition of an installation and its components 3.3 operational inspection and checks operations intended for verifying the good working condition of the installation before and during operation 3.4 operating test operation, of a defined duration, during which the correct working of the installation is
45、 tested 3.5 readiness for acceptance condition of the installation where the functional and technical safety conditions for acceptance have been fulfilled 3.6 readiness for operation condition of the installation where the functional and technical safety conditions to allow passengers to be transpor
46、ted have been fulfilled EN 1709:2004 (E) 8 4 General requirements 4.1 Application of this standard The requirements of this document apply to all installations along with the requirements of EN 1908, EN 1909, EN 12397, EN 12408, EN 12927-1, EN 12927-2, EN 12927-3, EN 12927-4, EN 12927-5, EN 12927-6,
47、 EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, prEN 13796-1, prEN 13796-2 and prEN 13796-3. 4.2 Safety principles 4.2.1 General The safety principles set out in EN 12929-1 apply. In addition, the following hazard scenarios and safety requirements relative to
48、 the scope of this document are to be taken into consideration. 4.2.2 Hazard scenarios The following events may lead to hazardous situations which can be avoided or limited by the requirements of this document: a) physical construction of the installation not in conformity with the documents presented; b) defective operation of individual components with each other and in their local environment; c) defects arising from long-term operation, prolonged stoppages or repeated and long-term operating conditions; d) use of insufficiently qualified and train
