1、BRITISH STANDARDBS EN 1870-5:2002Safety of woodworking machines Circular sawing machines Part 5: Circular saw benches/up-cutting cross-cut sawing machinesICS 79.120.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g5
2、3g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A2:2012National forewordThis British Standard is the UK implementation of EN 1870-5:2002+A :20 . It supersedes BS EN 1870-5:2002+A1:2009, The start and finish of text introduced or altered by amendment is indicated in the text by ta
3、gs. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this commit
4、tee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 1870-5:2002+A2:2012This Br
5、itish Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 23 July 2002Amendments/corrigenda issued since publicationDate Comments 31 March 2010 Implementation o
6、f CEN amendment A1:2009212which is withdrawn.Implementation of CEN amendment A2:201230 November 20127KH%ULWLVK6WDQGDUGV,QVWLWXWLRQ3XEOLVKHGE%6,6WDQGDUGV/LPLWHG,6%1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1870-5:2002+A2 September 2012 ICS 79.120.10 Supersedes EN 1870-5:2002+A1:2009English
7、 Version Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines Scurit des machines pour le travail du bois - Machines scie circulaires - Partie 5: Scies circulaires combines table et coupe transversale ascendante Sicherheit von H
8、olzbearbeitungsmaschinen - Kreissgemaschinen - Teil 5: Kombinierte Tischkreissgemaschinen/von unten schneidende Kappsgemaschinen This European Standard was approved by CEN on 8 November 2001 and includes Amendment 1 approved by CEN on 30 July 2009 and Amendment 2 approved by CEN on 27 July 2012. CEN
9、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl
10、ication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Ma
11、nagement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat
12、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-10
13、00 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-5:2002+A2:2012: EEN 1870-5:2002+A2:2012 (E) 2 Contents Foreword 40 Introduction 61 Scope 72 Normative references 73 Terms and definitions . 113.1 General 113.2 T
14、erms 113.3 Definitions 124 List of significant hazards 165 Safety requirements and/or measures 185.1 #General$ . 185.2 Controls 195.3 Protection against mechanical hazards 215.4 Protection against non-mechanical hazards 406 Information for use 456.1 #General$ . 456.2 Marking . 456.3 Instruction hand
15、book 46Annex A (normative) Open frame machines stability test . 50Annex B (normative) Dimensional tolerances of saw spindles . 51Annex C (normative) Riving knife mounting strength test 52Annex D (normative) Riving knife lateral stability test 53Annex E (normative) #Saw blade guard stability test wit
16、h lead-in or in-feed rollers$ 54E.1 General 54E.2 Machines with saw blade guards with lead-in 54E.3 Machines with saw blade guards with in-feed rollers 54Annex F (normative) #Saw blade guard mounted on the riving knife or separately stability test$ . 57F.1 General 57F.2 Separately from riving knife
17、mounted saw blade guards 57F.3 Riving knife mounted saw blade guards . 59Annex G (normative) #Impact test method for guards$ . 61G.1 General 61G.2 Test method 61G.3 Results 62G.4 Assessment 62G.5 Test report 62G.6 Test equipment for impact test 62Annex H (normative) #Brake tests$ 64H.1 Conditions fo
18、r all tests 64H.2 Tests 64BS EN 1870-5:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 3 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 66Bibliography 67BS EN 1870-5:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 4 Foreword This document
19、 (EN 1870-5:2002+A2:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
20、 by March 2013, and conflicting national standards shall be withdrawn at the latest by March 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pa
21、tent rights. This document includes Amendment 1, approved by CEN on 2009-07-30 and Amendment 2, approved by CEN on 2012-07-27. This document supersedes #EN 1870-5:2002+A1:2009$. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “ and #$. !This documen
22、t has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. #For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.$“ Organisati
23、ons contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association “EUMABOIS“. #Annexes A, B, C, D, E, F, G and H are normative and Annex ZA is informative.$ !EN 1870 Safety of woodworking machines Circular sawing machines cons
24、ists of the following parts: #deleted text$ Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi-blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw -benches/up-cutting cross-cut sawing machines Part 6: Ci
25、rcular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Part 8: Single blade edging circular rip sawin
26、g machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines BS EN 1870-5
27、:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 5 Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) Part 12: Pendulum cross-cut sawing machines Part 13: Horizontal beam panel sawing machines Part 14: Vertical panel sawing machines Part 15: Multi-b
28、lade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading Part 16: Double mitre sawing machines for V-cutting Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)“ #Part 18: Dimension saws Part 19: Circ
29、ular saw benches (with and without sliding table) and building site saws$ The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see introduction of #EN ISO 12100:2010$ for a description of
30、A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
31、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1870-5:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 6 0 Introduc
32、tion This #document$ has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This #document$ is a type “C” standard as defined in #EN ISO 12100:2010$. #The machinery concerned a
33、nd the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisi
34、ons of other standards, for machines that have been designed and built in accordance with the requirements of the provisions of this type C standard.$ The extent to which hazards are covered is indicated in the scope of this #document$. The requirements of this #document$ concern designers, manufact
35、urers, suppliers and importers of circular saw benches/up-cutting cross-cut sawing machines. #It is also useful for designers.$ This #document$ also includes information to be provided by the manufacturer to the user. Common requirements for tooling are given in #EN 847-1:2005+A1:2007$. Electrically
36、 driven machines excluded by the scope of this #document$ are covered by the requirements of #EN 61029-1:2009$. BS EN 1870-5:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 7 1 Scope !This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to
37、 circular saw benches/up-cutting cross-cut sawing machines, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials #if (where)$ they are covered with plastic edging and/or plastic/light alloy laminates #when they are used as intende
38、d and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse$.“ This #document$ does not apply to: !hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;“ !NOTE 1 Hand-held motor-operated electric t
39、ools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2006 together with EN 60745-2-5:2007.“ !machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being l
40、ifted by one person by hand.“. !NOTE 2 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002.“ !deleted text“ #This document is not applicable to machines which are manufactured before the date of issue of this EN.$ !NOTE 3“ Ci
41、rcular saw benches are dealt with in #prEN 1870-19:2011$. #NOTE 4 Machines covered by this document are listed under 1.1 of Annex IV of the Machinery Directive.$ 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, o
42、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“. !deleted text“ !#EN 614-1:2006+A1:2009$, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles“ !#EN 847-1:2005+A1:2007$, To
43、ols for woodworking Safety requirements Part 1: Milling tools, circular saw blades“ !#EN 894-1:1997+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators #EN 894-2:1
44、997+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays BS EN 1870-5:2002+A2:2012EN 1870-5:2002+A2:2012 (E) 8 #EN 894-3:2000+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part
45、 3: Control actuators“ !deleted text“ #deleted text$ !#EN 1005-1:2001+A1:2008$, Safety of machinery Human physical performance Part 1: Terms and definitions #EN 1005-2:2003+A1:2008$, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery
46、#EN 1005-3:2002+A1:2008$, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation #EN 1005-4:2005+A1:2008$, Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery #EN 1037:1995+A1:20
47、08$, Safety of machinery Prevention of unexpected start-up“ #EN 1088:1995+A2:2008$, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 50370-1:2005, Electromagnetic compatibility (EMC) Product family standard for machine-tools Part 1: Emission EN
48、50370-2:2003, Electromagnetic compatibility (EMC) Product family standard for machine-tools Part 2: Immunity“ !EN 60204-1:2006“, Safety of machinery Electrical equipment of machines Part 1: General requirements !(IEC 60204-1:2005, modified)“ !EN 60439-1:19991), Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999)“ EN 605292), Degree of protection provided by enclosures (IP code) (IEC 60529:1989) !EN 60825-1:2007, Safety of laser products Par
