1、BRITISH STANDARD AEROSPACE SERIESBS EN 2693:2005Aerospace series Aluminium alloy AL-P5086-H111 Sheet and strip 0,3 mm ua u6 mmThe European Standard EN 2693:2005 has the status of a British StandardICS 49.025.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g
2、50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 2693:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 October 2005 BSI 13 October 2005ISBN 0 580 46327 3National forewor
3、dThis British Standard is the official English language version of EN 2693:2005. It supersedes BS EN 2693:1994 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Subcommittee ACE/61/-/24, Light alloys,
4、 which has the responsibility to:A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the
5、section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
6、.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor relat
7、ed international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the documen
8、t was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2693 June 2005 ICS 49.025.20 Supersedes EN 2693:1993 English version Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm a 6 mm Srie arospatiale - A
9、lliage daluminium AL-P5086-H111 - Tles et bandes - 0,3 mm a 6 mm Luft- und Raumfahrt - Aluminiumlegierung AL-P5086-H111 - Bleche und Bnder - 0,3 mm a 6 mm This European Standard was approved by CEN on 22 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stip
10、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard e
11、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards
12、bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE
13、 FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2693:2005: E2 Foreword This document (EN
14、 2693:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services
15、of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the late
16、st by December 2005. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2693:1993. According to the CEN/CENEL
17、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
18、, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2693:20053 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258
19、. This standard has been prepared in accordance with EN 4500-2. 1 Scope This standard specifies the requirements relating to: Aluminium alloy AL-P5086- H111 Sheet and strip 0,3 mm a 6 mm for aerospace application. 2 Normative references The following referenced documents are indispensable for the ap
20、plication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN s
21、tandards and their use. EN 4400-2, Aerospace series Aluminium and aluminium alloy wrought products Technical specification Part 2: Sheet and strip. 1)EN 4500-2, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 2: Specific rules for aluminium, alumini
22、um alloys and magnesium alloys. 1) 1) Published as AECMA Prestandard at the date of publication of this standard. EN 2693:20054 1 Material designation Aluminium alloy AL-P5086- Others Element Si Fe Cu Mn Mg Cr Zn Ti Each Total Al min. 0,20 3,5 0,05 2 Chemical composition % max. 0,40 0,50 0,10 0,7 4,
23、5 0,25 0,25 0,15 0,05 0,15 Base 3 Method of melting 4.1 Form Sheet and strip 4.2 Method of production Rolled 4.3 Limit dimension(s) mm 0,3 a 6 5 Technical specification EN 4400-2 Delivery condition H111 6.1 Heat treatment 6.2 Delivery condition code U Use condition H111 7 Heat treatment Delivery con
24、dition Characteristics 8.1 Test sample(s) See EN 4400-2. 8.2 Test piece(s) See EN 4400-2. 8.3 Heat treatment Use condition 9 Dimensions concerned mm 0,3 a 0,8 0,8 a 3,2 3,2 a 6 10 Thickness of cladding on each face % 11 Direction of test piece LT LT LT 12 Temperature C Ambient Ambient Ambient 13 Pro
25、of stress Rp0,2MPa 100 100 100 14 Strength RmMPa 240 240 240 15 Elongation A % A50 mm 16 A50 mm 18 A50 mm 18 16 T Reduction of area Z % 17 Hardness 18 Shear strength RcMPa 19 Bending k 0,75: = 180 0,75: = 180 1: = 180 20 Impact strength 21 Temperature C 22 Time h 23 Stress aMPa 24 Elongation a % 25
26、Rupture stress RMPa 26 C Elongation at rupture A % 27 Notes (see line 98) EN 2693:20055 38 Intergranular corrosion See EN 4400-2. 44 External defects See EN 4400-2. 95 Marking inspection See EN 4400-2. 96 Dimensional inspection See EN 4400-2. 98 Notes 99 Typical use EN 2693:20056 100 Product qualifi
27、cation See EN 4400-2. Qualification programme to be agreed between manufacturer and purchaser. EN 2693:2005blankBS EN 2693:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK vi
28、ew on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the
29、quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +4
30、4 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +4
31、4 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless othe
32、rwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products an
33、d services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits con
34、tact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.Copyr
35、ightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in
36、 any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
