EN 2910-1994 en Aerospace Series Shank Nuts Self-Locking in Heat Resisting Steel FE-PA92HT (A286) Classification 1 100 MPa (at Ambient Temperature) 650 Degrees C《航空航天系列 耐高温钢FE-PA92.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 2055-1974 深度测杆.pdf

HB 2971-1977 模块.pdf

HB 2972-1977 垫板.pdf

HB 2973-1977 垫板.pdf

HB 4627-1992 焊硬质合金刀片的镶齿两面刃铣刀.D=100～315mm（大孔）.pdf

HB 4628-1992 焊硬质合金刀片的镶齿两面刃铣刀.D=100～315mm（小孔）.pdf

HB 4629-1992 焊硬质合金刀片的镶齿三面刃铣刀.D=100～180mm（大孔）.pdf

HB 4630-1992 焊硬质合金刀片的镶齿三面刃铣刀.D=200～315mm（大孔）.pdf

HB 4631-1992 焊硬质合金刀片的镶齿三面刃铣刀.D=100～180mm（小孔）.pdf