1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 2997-005:2012Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continu
2、ous, 200 C continuous, 260 C peakPart 005: Hermetic square flange receptacle Product standardCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012 BRITISH STANDARDN
3、ational forewordThis British Standard is the UK implementation of EN 2997-005:2012.It supersedes BS EN 2997-005:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations re
4、presented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012 ISBN 978 0 5
5、80 77031 9 ICS 49.060 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012. Amendments issued since publicationDate T e x t a f f e c t e dCopyright Euro
6、pean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2997-005 May 2012 ICS 49.060 Supersedes EN 2997-005:2006English Version
7、Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak - Part 005: Hermetic square flange receptacle - Product standard Srie arospatiale - Connecteurs lectriq
8、ues circulaires accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation - 65 C 175 C continu, 200 C continu, 260 C en pointe - Partie 005: Embase hermtique fixation par collerette carre - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplun
9、g, feuerbestndig oder nicht feuerbestndig, Betriebstemperaturen - 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze - Teil 005: Hermetischer fester Steckverbinder mit quadratischem Montageflansch - Produktnorm This European Standard was approved by CEN on 11 February 2012. CEN members are bound
10、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-
11、CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
12、 the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po
13、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any for
14、m and by any means reserved worldwide for CEN national Members. Ref. No. EN 2997-005:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E
15、) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics .5 5 Designation 9 6 Marking .9 7 Technical specification .9 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or n
16、etworking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 3 Foreword This document (EN 2997-005:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with
17、the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identic
18、al text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held
19、responsible for identifying any or all such patent rights. This document supersedes EN 2997-005:2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
20、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Commi
21、ttee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 4 1 Scope This European Standard specifies the characteristics of hermetic square flange mounted receptacles in th
22、e family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 3. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docu
23、ment and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fi
24、re-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specificationEN 2997-002, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65
25、 C to 175 C continuous, 200 C continuous, 260 C peak Part 002: Specification of performance and contact arrangements EN 2997-008, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C
26、continuous, 260 C peak Part 008: Plug Product standardEN 2997-009, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 009: Protective cover for receptacl
27、e Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2997-001 apply. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-
28、,-BS EN 2997-005:2012EN 2997-005:2012 (E) 5 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres; they apply after surface treatment. Key 1 four holes 103303,shell sizes 08 to 22 four holes 683913,shell sizes 24 to 28 2 thread 3 se
29、e EN 2997-001 Figure 1 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 6 Table 1 Housing size C G H K N S Mass Size contact 20 Size contac
30、ts 16 and 12 max. min. max. g max. 08 12,70 12,55 15,09 4,93 3,40 5,69 4,17 20,75 20,49 10,16 14,27 18 10 14,27 14,12 18,26 23,93 23,67 10,44 17,67 24 12 19,05 18,90 20,62 26,32 26,06 14,76 22,22 31 14 20,62 20,47 23,01 28,71 28,45 16,51 23,77 40 16 23,80 23,65 24,61 31,88 31,62 19,74 26,97 49 18 26
31、,97 26,82 26,97 34,24 33,98 21,95 30,15 54 20 30,15 30,00 29,36 36,63 36,37 26,26 33,32 62 22 33,32 33,17 31,75 39,80 39,54 28,78 36,49 77 24 36,50 36,35 34,92 43,39 43,13 32,61 39,67 88 28 42,82 42,67 39,67 50,93 50,67 38,81 46,02 130 Copyright European Committee for Standardization Provided by IHS
32、 under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 7 4.2 Panel cut-out and mounting of connectors See Figure 2 and Table 2 for panel cut-out and Figure 3 for mounting of connectors. Dimensions and toleranc
33、es are in millimetres. Connector one Connector two Key 1 four holes C X min. value is calculated as follows: D/2 connector one + D/2 connector two. (See Table 2 for value D) Figure 2 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction
34、or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 8 Table 2 Housing size A min. B C D min. 08 15,80 15,09 3,30 3,10 31,70 10 18,70 18,26 34,90 12 23,40 20,62 39,60 14 24,90 23,01 41,25 16 28,30 24,61 44,45 18 31,10 26,97 47,35 20 34,50 29,36 51,90 22 37,50
35、31,75 54,10 24 40,60 34,92 3,91 3,68 57,25 28 48,00 39,67 65,25 Front mounting Rear mounting Key 1 panel Figure 3 4.3 Material, surface treatment See Table 3. 4.4 Main general characteristics See EN 2997-002. 4.5 Possible combinations of plugs and receptacles See EN 2997-002. Copyright European Comm
36、ittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2997-005:2012EN 2997-005:2012 (E) 9 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, RECEPTACLE Identity block EN2997Y02457M6 Number o
37、f the basic standard Class (see Table 3) Hermetic square-flange mounted receptacle (see EN 2997-002) Housing size and contact arrangement (see EN 2997-002) Type of contact: M = male Polarization (see EN 2997-002) NOTE If necessary, the code I9005 shall be placed between the description block and the
38、 identity block. Table 3 Class and model connector Class Model description Y Hermetic receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, solder contacts, maximum operating temperature 200 C continuous YE Hermetic receptacle with housing (shell) in passivate
39、d stainless steel, 500 h resistance to salt mist, solder contacts, maximum operating temperature 260 C peak 6 Marking Unless there are other specific contractual requirements, the marking shall include: the identity block as defined in Clause 5; the date of manufacture (year, week); the manufacturer
40、s name or trade mark. 7 Technical specification See EN 2997-001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for
41、 Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networkin
42、g permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Ch
43、arter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendme
44、nt or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards
45、would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service ca
46、lled PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website a
47、ddition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Member
