1、BS EN2997-013:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Connectors, electrical,circular, coupled bythreaded ring, fire-resistant or non fire-resistant, operatingtemperatures 65 Cto 175 C continuous,200 C continuous, 260C peak
2、Part 013: O-ring seal for jam-nutreceptacles Product standardThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 62405 6Amendments/corrigenda issued since publicationDate CommentsBS EN 2997-013:2009National forewor
3、dThis British Standard is the UK implementation of EN 2997-013:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secreta
4、ry.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 2997-013:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2997-01
5、3 February 2009 ICS 49.060 English Version Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak - Part 013: O-ring seal for jam-nut receptacles - Product st
6、andard Srie arospatiale - Connecteurs lectriques circulaires accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation - 65 C 175 C continu, 200 C continu, 260 C en pointe - Partie 013: Joint torique pour embase fixation par crou - Norme de produit Luft- und Raumfahrt - Elektri
7、sche Rundsteckverbinder mit Schraubkupplung, feuerbestndig oder nicht feuerbestndig, Betriebstemperaturen - 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze - Teil 013: Dichtring fr festen Steckverbinder mit Mutternbefestigung -Produktnorm This European Standard was approved by CEN on 4 July 20
8、08. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
9、on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management
10、Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P
11、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and b
12、y any means reserved worldwide for CEN national Members. Ref. No. EN 2997-013:2009: EBS EN 2997-013:2009EN 2997-013:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Required characteristics .45 Designation 66 Marking .67 Technical specification .6BS EN
13、2997-013:2009EN 2997-013:2009 (E) 3 Foreword This document (EN 2997-013:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has receiv
14、ed the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009
15、, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
16、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
17、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accorda
18、nce with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. BS EN 2997-013:2009EN 2997-013:2009 (E) 4 1 Scope This standard specifies the characteristics of Oring seal for jam-nut receptacles in the family of circular electrical co
19、nnectors coupled by threaded ring. It applies to the class defined in Table 2. For the receptacles using these jam-nuts, see EN 2997-004 and EN 2997-006. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the e
20、dition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuo
21、us, 200 C continuous, 260 C peak Part 001: Technical specification EN 2997-002, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 002: Specification of
22、performance and contact arrangements EN 2997-004, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 004: Jam-nut mounted receptacle Product standard EN
23、2997-006, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 006: Hermetic jam-nut mounted receptacle Product standard 3 Terms and definitions For the pu
24、rposes of this document, the terms and definitions given in EN 2997-001 apply. 4 Required characteristics 4.1 Dimensions See Figure 1 and Table 1. Dimensions and tolerances are in millimetres, they apply after surface treatment. BS EN 2997-013:2009EN 2997-013:2009 (E) 5 Figure 1 Table 1 Housing size
25、 N Mass gmax. 08 17,02 16,92 0,23 10 20,22 20,12 0,27 12 24,99 24,89 0,32 14 26,57 26,47 0,33 16 29,74 29,64 0,37 18 32,92 32,82 0,41 20 37,64 37,54 0,47 22 40,87 40,77 0,50 24 43,99 43,89 0,56 28 50,39 50,29 0,64 4.2 Material, surface treatment See Table 2. BS EN 2997-013:2009EN 2997-013:2009 (E) 6
26、 4.3 Main general characteristics See EN 2997-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, ORING SEAL Identity block EN2997S922 Number of the basic standard Class (see Table 2) O-ring seal for jam-nut receptacle (see EN 2997-002) Housing size Table 2 Class Model description S O
27、-ring seal for jam-nut receptacle maximum operating temperature 200 C continuous. NOTE S class O-ring are used for both RS, WS, S, Y and YE classes jam-nut receptacles. SE O-ring seal for jam-nut receptacle maximum operating temperature 260 C peak. 6 Marking Not applicable. 7 Technical specification
28、 See EN 2997-001. BS EN 2997-013:2009This page has been intentionally left blank BS EN2997-013:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing Br
29、itishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the c
30、onstant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Te
31、l:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed t
32、o Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published
33、 as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive
34、details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other
35、benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists
36、in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans e
37、lectronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
