1、BRITISH STANDARD BS EN 3114-003:2006 Aerospace series Test method Microstructure of ( ! + “) titanium alloy wrought products Part 003: Microstructure of plate The European Standard EN 3114-003:2006 has the status of a British Standard ICS 49.025.30 BS EN 3114-003:2006 This British Standard was publi
2、shed under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007 ISBN 978 0 580 50079 4 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3114-003:2006. The UK participation in its preparation was entrusted by Technical
3、 Committee ACE/61, Metallic materials for aerospace purposes, to Panel ACE/61/-/49, Titanium and its alloys. A list of organizations represented on ACE/61/-/49 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users
4、are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3114-003 December 2006 ICS 49.025.30 English Version Aerospac
5、e series - Test method - Microstructure of ( + ) titanium alloy wrought products - Part 003: Microstructure of plate Srie arospatiale - Mthode dessai - Microstructure des produits corroys en alliage de titane ( + ) - Partie 003 : Microstructure des plaques Luft- und Raumfahrt - Prfverfahren - Mikrog
6、efge Kneterzeugnisse von Titanlegierung ( + ) - Teil 003: Mikrogefge von Platten This European Standard was approved by CEN on 18 October 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n
7、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in
8、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Fi
9、nland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES
10、 KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3114-003:2006: E2 Contents Page Foreword3 1 Scope4 2 Normative references4 3 Micrographs.4 EN 3114-003:
11、20063 Foreword This document (EN 3114-003:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nationa
12、l Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national stand
13、ards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Inter
14、nal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether
15、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3114-003:20064 1 Scope This standard contains pictures of the microstructure of ( + ) titanium alloy plate. It shall be used in conjunction with EN 3114-001. 2 Normative references The
16、 following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3114-001, Aerospace series Microstructure of ( +
17、) titanium alloy wrought products Part 00 1: General requirements. 3 Micrographs See Table 1. Table 1 Photo micrograph No. Description 3T1 to 3T38 ( + ) structure, globular/lamellar, transverse section LT-ST. 3T100 to 3T106 ( + ) structure, with local blocky and stringers, transverse section LT-ST.
18、3A1 to 3A8 ( + ) structure, with lean areas. 3T200 to 3T202 transformed structure, transverse section LT-ST. EN 3114-003:20065 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T1 100 : 1 500 : 1 3T2 100 : 1 500 : 1 3T3 EN 3114-003:20066 ( + + + + ) structure, globu
19、lar/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T4 100 : 1 500 : 1 3T5 100 : 1 500 : 1 3T6 EN 3114-003:20067 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T7 100 : 1 500 : 1 3T8 100 : 1 500 : 1 3T9 EN 3114-003:20068 ( + + + + ) structure, globular/lamell
20、ar, transverse section LT-ST 100 : 1 500 : 1 3T10 100 : 1 500 : 1 3T11 100 : 1 500 : 1 3T12 EN 3114-003:20069 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T13 100 : 1 500 : 1 3T14 100 : 1 500 : 1 3T15 EN 3114-003:200610 ( + + + + ) structure, globular/lamellar,
21、 transverse section LT-ST 100 : 1 500 : 1 3T16 100 : 1 500 : 1 3T17 100 : 1 500 : 1 3T18 EN 3114-003:200611 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T19 100 : 1 500 : 1 3T20 100 : 1 500 : 1 3T21 EN 3114-003:200612 ( + + + + ) structure, globular/lamellar, t
22、ransverse section LT-ST 100 : 1 500 : 1 3T22 100 : 1 500 : 1 3T23 100 : 1 500 : 1 3T24 EN 3114-003:200613 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T25 100 : 1 500 : 1 3T26 100 : 1 500 : 1 3T27 EN 3114-003:200614 ( + + + + ) structure, globular/lamellar, tra
23、nsverse section LT-ST 100 : 1 500 : 1 3T28 100 : 1 500 : 1 3T29 100 : 1 500 : 1 3T30 EN 3114-003:200615 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T31 100 : 1 500 : 1 3T32 100 : 1 500 : 1 3T33 EN 3114-003:200616 ( + + + + ) structure, globular/lamellar, trans
24、verse section LT-ST 100 : 1 500 : 1 3T34 100 : 1 500 : 1 3T35 100 : 1 500 : 1 3T36 EN 3114-003:200617 ( + + + + ) structure, globular/lamellar, transverse section LT-ST 100 : 1 500 : 1 3T37 100 : 1 500 : 1 3T38 EN 3114-003:200618 ( + + + + ) structure, with local blocky and stringers, transverse sec
25、tion LT-ST 100 : 1 500 : 1 3T100 100 : 1 500 : 1 3T101 100 : 1 500 : 1 3T102 EN 3114-003:200619 ( + + + + ) structure, with local blocky and stringers, transverse section LT-ST 100 : 1 500 : 1 3T103 100 : 1 500 : 1 3T104 100 : 1 500 : 1 3T105 EN 3114-003:200620 ( + + + + ) structure, with local bloc
26、ky and stringers, transverse section LT-ST 100 : 1 500 : 1 3T106 EN 3114-003:200621 ( + + + + ) structure, with lean areas 100 : 1 3A1 100 : 1 3A2 100 : 1 3A3 EN 3114-003:200622 ( + + + + ) structure, with lean areas 100 : 1 3A4 100 : 1 3A5 100 : 1 3A6 EN 3114-003:200623 ( + + + + ) structure, with
27、lean areas 100 : 1 3A7 100 : 1 3A8 EN 3114-003:200624 transformed structure, transverse section LT-ST 100 : 1 3T200 100 : 1 3T201 100 : 1 3T202 EN 3114-003:2006 blankBS EN 3114-003:2006 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body re
28、sponsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest am
29、endments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be
30、 found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign st
31、andards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementat
32、ion of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic informat
33、ion services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on th
34、e purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Fu
35、rther information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents
36、Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary det
37、ails such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
