EN 3146-2001 en Aerospace Series - Round Bars Hot Rolled in Steel - Close Tolerances - Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm - Dimensions《航空航天系列 紧公差 直径.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3679-1986 加工高温合金普通螺纹的螺母丝锥 d＝8~10mm P＝0.5~1.5mm.pdf

HB 3680-1986 加工高温合金普通螺纹的螺母丝锥 d＝11~36mm.pdf

HB 3681-1986 普通螺纹用滚丝轮54-12型 d＝2~45mm P＝0.35~2mm.pdf

HB 3682-1986 普通螺纹用滚丝轮45-12型 d＝2~39mm P＝0.35~2mm.pdf

HB 3683-1986 普通螺纹用滚丝轮45-8型 d＝2~33mm P＝0.35~2mm.pdf

HB 3684-1986 滚压普通螺纹的滚丝轮用滚丝轴 d＝2~45mm P＝0.35~2mm.pdf

HB 3687-1986 加工普通钢不通孔普通螺纹带后引导的短柄机、手用丝锥 d＝6~11mm.pdf

HB 3688-1986 加工普通钢不通孔普通螺纹带后引导的短柄机、手用丝锥 d＝12~36mm.pdf

HB 3689-1986 加工普通钢不通孔普通螺纹带后引导的长柄机、手用丝锥 d＝3~5mm.pdf