1、BRITISH STANDARD AEROSPACE SERIESBS EN 3333:2005Aluminium alloy AL-P7475-T762 Sheet and strip 0,6 mm ka k6 mmThe European Standard EN 3333:2005 has the status of a British StandardICS 49.025.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g
2、40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3333:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 7 October 2005 BSI 7 October 2005ISBN 0 580 46352 4National forewordThis British Stand
3、ard is the official English language version of EN 3333:2005.The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Subcommittee ACE/61/-/24, Light alloys, which has the responsibility to:A list of organizations represented
4、on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or b
5、y using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunit
6、y from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the
7、 UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Co
8、mmentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3333 June 2005 ICS 49.025.20 English version Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm Srie arospatiale - Alliage daluminium AL-P7475-T762 - Tles et bandes - 0,6 mm a 6 mm Luft- und Raumfahrt - Alumin
9、iumlegierung AL-P7475-T762 -Bleche und Bnder - 0,6 mm a 6 mm This European Standard was approved by CEN on 22 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
10、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
11、de by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany
12、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management
13、Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3333:2005: E2 Foreword This document (EN 3333:2005) has been prepared by the European Association of Aerospace Manufacturers - Standar
14、dization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard sha
15、ll be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest by December 2005. Attention is drawn to the possibility that some of the elements of this d
16、ocument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standar
17、d: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3333:20053 Introdu
18、ction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2. 1 Scope This standard specifies the requirements relating to: Alumini
19、um alloy AL-P7475- T762 Sheet and strip 0,6 mm a 6 mm for aerospace application. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r
20、eferenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4400-2, Aerospace series Aluminium and aluminium alloy wrought products Technical specification Part 2: Sh
21、eet and strip. 1)EN 4500-2, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys. 1) 1) Published as AECMA Prestandard at the date of publication of this standard. EN 3333:20054 1 Mat
22、erial designation Aluminium alloy AL-P7475- Others Element Si Fe Cu Mn Mg Cr Zn Ti Each Total Al min. 1,2 1,9 0,18 5,2 2 Chemical composition % max. 0,10 0,12 1,9 0,06 2,6 0,25 6,2 0,06 0,05 0,15 Base 3 Method of melting 4.1 Form Sheet and strip 4.2 Method of production Rolled 4.3 Limit dimension(s)
23、 mm 0,6 a 6 5 Technical specification EN 4400-2 Delivery condition F O T761 6.1 Heat treatment + 460 C 485 C a/ WQ 40 C + 115 C 125 C / 3 h t 6 h + 158 C 178 C / 14 h t 70 h 6.2 Delivery condition code F A P Use condition T762 7 Heat treatment Delivery condition + 460 C 485 C b/ WQ 40 C + 115 C 125
24、C / 3 h t 6 h + 158 C 178 C / 14 h t 70 h Characteristics 8.1 Test sample(s) See EN 4400-2. 8.2 Test piece(s) See EN 4400-2. 8.3 Heat treatment Delivery condition: O Use condition: T762 c9 Dimensions concerned mm 0,6 a 1,6 1,6 a 2,3 2,3 a 3,2 3,2 a 6 0,6 a 1,0 1,0 a 6 10 Thickness of cladding on eac
25、h face % 11 Direction of test piece LT LT 12 Temperature C Ambient Ambient 13 Proof stress Rp0,2MPa 137 137 144 410 14 Strength RmMPa 248 262 268 490 15 Elongation A % A50 mm 10 A50 mm 7 A50 mm 9 16 T Reduction of area Z % 17 Hardness 19 Bending k 1: = 180 1,5: = 180 2: = 180 2,5: = 180 20 Impact st
26、rength 21 Temperature C 22 Time h 23 Stress aMPa 24 Elongation a % 25 Rupture stress RMPa 26 C Elongation at rupture A % 27 Notes (see line 98) a, b, cEN 3333:20055 32 Electrical conductivity See EN 4400-2.7 22,7 MS/m Acceptable 22,0 MS/m 22,7 MS/m Acceptable if Rp0,2 470 MPa and/or if exfoliation c
27、orrosion tests meet the acceptance criteria: see line 49. 22,0 MS/m Not acceptable 40 Fracture toughness (Kc) See EN 4400-2.5 T762 c7 Dimensions (mm) T-L MPa m 1,0 a 3,2 95 3,2 a 6 85 44 External defects See EN 4400-2. 47 Notch/yield ratio (Re/Rp0,2) See EN 4400-2. 49 Exfoliation corrosion See EN 44
28、00-2. 2 The “capability clause“ shall apply unless testing is required to determine acceptance: see line 32. In that case, frequency of testing shall be agreed between the manufacturer and purchaser. 7 Exfoliation corrosion shall not be greater than that of grade EB. 95 Marking inspection See EN 440
29、0-2. 96 Dimensional inspection See EN 4400-2. 98 Notes aThis temperature range may be extended to 525 C (particularly to facilitate the use of a continuous solution heat treatment furnace) with the proviso that appropriate prior homogenisation heat treatments are applied to the rolling ingot and/or
30、sheet/strip to avoid incipient melting (overheating). bIt is recommended that material in the O delivery condition shall not be formed, stretched and/or straightened in excess of approximately 3 % before solution heat treatment, in order to avoid the development of coarse grain. cDue to possible pro
31、blems of test piece distortion after solution heat treatment and quenching by the purchaser, fracture toughness tests may be carried out on material in the T761 condition, in which case tensile tests shall be carried out in both T761 and T762 tempers. However, although T761 and T762 properties shoul
32、d be similar, it should be recognised that the latter may be affected by the purchasers processing and practices and, accordingly, T762 properties cannot be guaranteed by the manufacturer. 99 Typical use EN 3333:20056 100 Product qualification See EN 4400-2. Qualification programme to be agreed betw
33、een manufacturer and purchaser. EN 3333:2005blankBS EN 3333:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is
34、 incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if a
35、nyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating ser
36、vice called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-.
37、 Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide ran
38、ge of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996
39、 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax:
40、+44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds
41、the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording o
42、r otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
