1、BS EN 3373-014:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Terminal lugs and in-line splices for crimping on electric cond ctorsPart 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up
2、to 200C Product standarduThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009 BSI 2009ISBN 978 0 580 57871 7Amendments/corrigenda issued since publicationDate CommentsBS EN 3373-014:2009National forewordThis British Standard is the UK
3、 implementation of EN 3373-014:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not pur
4、port to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3373-014 March 2009 ICS 49.060 English Version Aerospace
5、series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 C - Product standard Srie arospatiale - Cosses et prolongateurs pour sertissage sur conducteurs lectriques - Part
6、ie 014: Prolongateurs isols et tanches pour sertissage sur conducteurs en cuivre, temprature jusqu 200 C - Norme de produit Luft- und Raumfahrt - Kabelschuhe und Stossverbinder zum crimpen an elektrische Leitungen - Teil 014: Stossverbinder isoliert, abgedichtet, Crimpenversion Kupferleitungen, fr T
7、emperaturen bis 200 C - Produktnorm This European Standard was approved by CEN on 30 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
8、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
9、r the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
10、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management C
11、entre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3373-014:2009: EEN 3373-014:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Characteristi
12、cs .45 Tests and requirements 66 Designation 67 Quality assurance 68 Details of assembly tooling 69 Marking .710 Packaging .7BS EN 3373-014:2009EN 3373-014:2009 (E) 3 Foreword This document (EN 3373-014:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardi
13、zation (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be
14、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this docum
15、ent may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: A
16、ustria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN
17、3373-014:2009EN 3373-014:2009 (E) 4 1 Scope This standard defines the characteristics of sealed, insulated, nickel plated, in-line splices for crimping on nickel plated copper conductors. They may be used at temperatures up to 200 C maximum on nickel plated conductors with insulation rated for at le
18、ast 135 C. This standard shall be used in conjunction with EN 3373-001. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
19、 document (including any amendments) applies. EN 2083, Aerospace series Copper and copper alloys conductors for electrical cables Product standard. EN 2591-305, Aerospace series Elements of electrical and optical connection Test methods Part 305: Rapid change of temperature. EN 3373-001, Aerospace s
20、eries Terminal lugs and in-line splices for crimping on electric conductors Part 001: Technical specification. MIL-DTL-22520/37: September 1997, Crimping tool, electrical, wire splicing, hand actuated, Type 2, for environmental splices, wire range 26-12 AWG. 1)ASTM B75-97, Standard specification for
21、 seamless copper tube. 2)SAE-AMS-QQ-M-290, Nickel plating (Electrodeposited). 3)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3373-001 apply. 4 Characteristics 4.1 Temperature range The operational range for the assemblies specified is 65 C to 200 C
22、. 1) Published by: Department of Defense (DoD), the Pentagon, Washington, DC 20301, USA. 2) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, USA. 3) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Co
23、mmonwealth Drive, Warrendale, PA 15096-0001, USA. BS EN 3373-014:2009EN 3373-014:2009 (E) 5 4.2 Materials 4.2.1 Insulating sleeve The outer insulating and sealing sleeve shall be heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer with meltable inner sealing rings of mod
24、ified thermoplastic fluoroelastomer. 4.2.2 Crimp barrel The crimp barrel shall be copper alloy ASTM B75. 4.2.3 Plating of crimp barrel The plating of the crimp barrel shall be nickel per SAE-AMS-QQ-M-290. 4.3 Dimensions and mass For dimensions and mass, see Figure 1 and Tables 1 and 2. Crimp barrel
25、Sealing sleeve Key 1 Colour code (see Table 1) 2 Insulation sleeve 3 Meltable rings aAfter crimping Figure 1 Crimp barrel and sealing sleeve Table 1 Barrel plating, conductor range and colour codes Item code Plating on barrel Colour code bands Range of conductors as per EN 2083Mass per 1 000 pieces
26、EN Codes AWG g 001 Nickel Red 001 006 26 20 463 002 Nickel Blue 006 012 20 16 731 003 Nickel Yellow 010 030 18 12 1 235 BS EN 3373-014:2009EN 3373-014:2009 (E) 6 Table 2 Dimensions of crimp barrels and sealing sleeves Item code Crimp barrel Sealing sleeve A B C D E As supplied Minimum 0,05 0,25 0,25
27、 max. ID min acceptable cable diameter 001 1,205 0,065 1,97 0,060 12,7 5,97 0,38 2,16 0,64 002 1,69 0,060 2,635 0,065 14,61 6,86 0,51 2,79 0,64 003 2,53 0,070 3,81 0,080 14,61 6,86 1,27 4,32 0,64 5 Tests and requirements 5.1 The tests and requirements shall be in accordance with EN 3373-001 with the
28、 following exceptions. 5.2 For test EN 2591-305, TBshall be 65 C. 5.3 Dielectric withstand voltage, 2 500 volts D.C. for 1 min. The leakage current shall be less than 2 mA. 5.4 Insulation resistance shall be greater than 5 000 M. 6 Designation EXAMPLE Description block SEALED IN-LINE SPLICE Identity
29、 block EN3373-014-XXX Number of this standard Item code (see Table 1) NOTE If necessary, the code I9005 may be placed between the description block and the identity block. 7 Quality assurance Quality assurance shall be in accordance with EN 3373-001. 8 Details of assembly tooling 8.1 Crimping tools
30、Crimping tools shall conform to the requirements of MIL-DTL-22520/37. BS EN 3373-014:2009EN 3373-014:2009 (E) 7 8.2 Heating devices Hot air heating devices shall be fitted with reflectors to concentrate the heat and protect adjacent materials from damage and shall produce an air temperature of 280 C
31、 to 340 C in the active zone of the reflector. For heating in areas where there may be a hazard due to the presence of flammable vapours only heaters specially designed and approved for use in such areas shall be used. 9 Marking The item code as per Table 1 shall be indicated by coloured bands on th
32、e crimp barrel as shown in Figure 1. 10 Packaging The packaging is to be marked with the EN designation, manufacturers name, part number, the quantity in the package and the date of manufacture and batch number. BS EN 3373-014:2009BS EN 3373-014:2009BSI GroupHeadquarters 389Chiswick High Road,London
33、, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish St
34、andards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingt
35、his British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatic
36、ally receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop o
37、n the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternatio
38、nal standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of
39、BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British St
40、andards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted
41、under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implem
42、enting the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
