1、BRITISH STANDARD AEROSPACE SERIESBS EN 3545-003:2005Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures g55 C to 175 C Part 003: Connectors with female contacts Product standardThe European Standard EN 3545-003:2005 has the st
2、atus of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3545-003:2005This British Standard was published under the
3、 authority of the Standards Policy and Strategy Committeeon 28 February 2006 BSI 28 February 2006ISBN 0 580 47887 4National forewordThis British Standard is the official English language version of EN 3545-003:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6,
4、Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace connectors, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, a
5、nd keep UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European pu
6、blications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the ne
7、cessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back co
8、ver.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 3545-003 November 2005 ICS 49.060English Version Aerospace series - Connectors, electrical,
9、 rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 003: Connectors with female contacts - Product standard Srie arospatiale - Connecteurs lectriques, rectangulaires, tanches et non tanches larrire, botier en plastique, verrou
10、illage, tempratures dutilisation - 55 C 175 C - Partie 003 : Connecteurs contacts femelles - Norme de produit Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehuse, Verriegelungssystem, Betriebstemperaturen von - 55 C bis 175 C - Teil 003: Steckverbi
11、nder mit Buchsenkontakten - Produktnorm This European Standard was approved by CEN on 26 September 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration
12、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
13、 under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary
14、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de St
15、assart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3545-003:2005: EEN 3545-003:20052Contents PageForeword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Required characteristics 4 5
16、Designation .8 6 Delivery conditions .9 7 Marking 9 8 Technical specification.9EN 3545-003:20053Foreword This European Standard (EN 3545-003:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accorda
17、nce with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of
18、 an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held
19、 responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G
20、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 41 Scope This standard specifies connectors with female contacts in the family of rectangular electric
21、al connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from 55 C to 175 C. These connectors may be used as receptacles (fixed housings) or plugs (free housings) in conjunction with the following coding and attachment system: male coding and attachm
22、ent system for mounting on a fixed housing; female coding and attachment system for mounting on a free housing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc
23、es, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General.EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utiliza
24、tion of contacts.1)EN 3545-001, Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures 55 C to 175 C Part 001: Technical specification.EN 3545-002, Aerospace series Connectors, electrical, rectangular, with seale
25、d and non-sealed rear, plastic housing, locking device, operating temperatures 55 C to 175 C Part 002: Specification of performance and contact arrangements.3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 2591-100 apply. 4 Required characteristics 4.1
26、 Dimensions, mass See Figure 1, Figure 2 and Table 1. Dimensions and tolerances are in millimetres. Mass (without accessory and without contact): non-sealed housing: 19 g max.; sealed housing: 21 g max. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 3545-003:20055K
27、ey1 Grommet for rear sealing 2 Female contact 3 14,10 max. for contact arrangement 07 and 08 26,1 max. for contact arrangement 16 15 max. for other contact arrangements 4 23 max. for contact arrangement 07 and 08 35 max. for contact arrangement 16 20 max. for other contact arrangements aApplicable d
28、imensions for contact arrangement 07 and 08Figure 1 EN 3545-003:20056X (3:1) Y (3:1) Non-sealed Sealed version version W (4:1) Grommet dimensions for size 8 cavity Z (3:1) V (15:1) Key1 Rear grommet 2 Female contact 3 Electrical point of female contact, see EN 3545-001. 4 (46,5 2) for contact size 8
29、 (45 2) for other contacts aNot applicable for arrangement code 07 and 08 Figure 2 EN 3545-003:20057Table 1 Cavity for contact D E F 22 1,70 1,60 0,97 0,89 1,69 1,62 20 2,03 1,93 1,37 1,27 1,94 1,88 16 2,84 2,73 1,88 1,80 3,07 3,00 12 3,66 3,56 2,69 2,62 4,29 4,22 10 4,45 4,34 3,48 3,40 5,64 5,54 08
30、 6,85 6,75 5,67 5,59 7,47 7,34 4.2 Recommended panel cut-out for connectors fitted with male coding and attachment system See Figure 3. Maximum thickness of panel: 1,6 Minimum pitch between connectors: 14,2 Figure 3 EN 3545-003:200584.3 Main general characteristics See EN 3545-002. 5 Designation EXA
31、MPLE Description block CONNECTOR, ELECTRICAL Identity block EN3545D01FXB13B Number of the basic standard Type of housing: D: non-sealed E: sealed Contact arrangement (see EN 3545-002) Type of contact: F: female contact (male housing) Contact connection: X: crimping Type of coding and attachment syst
32、em: - female for mounting on free housing (plug): A - male for mounting on fixed housing (receptacle): B - coding and attachment system not delivered: without code Coding 2)(see EN 3545-002): - 1st digit: position of index 1 to 6 for cavity A - 2nd digit: position of index 1 to 6 for cavity B - 00:
33、code not defined - without code, coding and attachment system not delivered Delivery conditions 3)- connector without contacts, with coding and attachment system: A - connector with contacts (version 1, see Table 2) and coding and attachment system: B - connector with contacts (version 2, see Table
34、2) and with coding and attachment system: D - connector without contact and without coding and attachment system: without code NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 2) The coding is given as information for users. 3) Where a connector
35、 is ordered with its fittings, these may be delivered not fitted. Not marked on theconnectorEN 3545-003:200596 Delivery conditions The delivered contacts according to the contact arrangements are given in Table 2. The contacts size 8 are always delivered separately. Table 2 Delivery conditions code
36、Delivered with female contactsaVersion 1 B EN 3155-003F2222 EN 3155-015F2018 EN 3155-003F1614 EN 3155-003F1212 EN 3155-003F1010 Version 2 bDEN 3155-015F2020 EN 3155-003F1616 aSee EN 3155-002. bOnly applicable to contact arrangements codes 01, 03 and 04 7 Marking Unless there are other specific contr
37、acted requirements, the marking shall include: the part of identity block as defined in Clause 5; the date of manufacture (year/week); the manufacturers name or trademark. 8 Technical specification See EN 3545-001. EN 3545-003:2005BS EN 3545-003:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British S
38、tandards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British S
39、tandards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the techn
40、ical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying stan
41、dardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international stand
42、ards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to E
43、xporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards deve
44、lopments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Sta
45、ndards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted unde
46、r the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of impleme
47、nting the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
