1、BS EN3660-018:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 018: Cable outlet, style A, 90,unsealed, with cable tie strain relief Product sta
2、ndardThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2009 BSI 2009ISBN 978 0 580 63190 0Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-018:2009National forewordThis British Standard is the UK implementation of EN 36
3、60-018:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the
4、necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3660-018:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-018 March 2009 ICS 49.060 English Version Aerospace series
5、 - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90, unsealed, with cable tie strain relief - Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Pa
6、rtie 018: Raccord coud 90 non tanche, type A, avec tenue du cble par frettage - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 018: Endgehuse, Bauform A, 90, nicht abgedichtet, mit Arm fr Kabelbinder - Produktnorm This European St
7、andard was approved by CEN on 30 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin
8、g such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own la
9、nguage and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
10、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN Al
11、l rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-018:2009: EBS EN 3660-018:2009EN 3660-018:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Characteristics .4 5 Designation 9 6 Marki
12、ng 10 7 Technical specification 10 BS EN 3660-018:2009EN 3660-018:2009 (E) 3 Foreword This document (EN 3660-018:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of t
13、his Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by
14、endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible
15、for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
16、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-018:2009EN 3660-018:2009 (E) 4 1 Scope This product standard defines a range of cable
17、 outlets, style A, 90, unsealed, with cable tie strain relief. Associated electrical connector(s) : see EN 3660-002. Temperature range, Class A : 65 C to 200 C Class N : 65 C to 200 C Class W : 65 C to 175 C 2 Normative references The following referenced documents are indispensable for the applicat
18、ion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products. EN 2591-100*, Aerospace series Elements of electrical and opt
19、ical connection Test methods Part 100: General. EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification. EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and
20、optical connectors Part 002: Index of product standards. EN 3660-036, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 036: Spacer spad Product standard. 1)AS85049A, Connector accessories, electrical general specification for.2)3 Terms and
21、 definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and masses For dimensions and masses, see Figure 1, Figure 2c) and Table 1. Dimensions and tolerances are in millimetres. *All its parts quoted in this standard. 1)
22、In preparation at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA BS EN 3660-018:2009EN 3660-018:2009 (E) 5 Key 1 Cable tie or lace cord Figure 1 Detail A: see Figures 2a) to 2e). Figure 2a) Without ground lug and spacer
23、 pad Figure 2b) Without ground lug and with spacer pad Figure 2c) With ground lug and without spacer pad Figure 2d) With ground lug and spacer pad Figure 2e) Spacer pad see EN 3660-036 A F GHA C D E5,8 Ref 1B 8,43,36,63,6BS EN 3660-018:2009EN 3660-018:2009 (E) 6 Table 1 Shell size A B CaD E F G H Nu
24、mber of teeth Without With Thread Without With Without With Rad self-locking self-locking lug Masses max. ClassesA, N and W max. 0,38 max. max. min. max. g g 09 M12x1-6H 19,60 24,80 6,29 11,80 12,50 7,59 22,60 24,60 2,11 12 5,5 6,5 11 M15x1-6H 20,80 26,90 6,29 12,60 12,50 10,85 24,10 26,10 2,87 16 6
25、,0 7,5 13 M18x1-6H 23,90 29,70 6,29 13,60 12,50 13,74 27,20 29,20 3,81 20 7,5 9,0 15 M21x1-6H 27,20 32,70 6,29 14,60 12,50 16,92 33,80 35,80 4,77 24 11,0 13,0 17 M25x1-6H 30,70 36,10 6,29 15,00 12,50 20,09 35,30 37,30 5,66 28 12,5 14,5 19 M28x1-6H 34,50 39,10 6,29 17,40 12,50 22,18 37,60 39,60 7,13
26、32 13,5 16,0 21 M31x1-6H 37,60 42,40 6,29 17,40 12,50 25,96 42,20 44,20 7,13 36 15,0 18,5 23 M34x1-6H 40,60 51,10 6,29 18,20 12,50 29,13 47,00 49,00 7,82 40 17,5 20,5 25 M37x1-6H 43,20 53,80 6,29 19,20 12,50 32,31 48,50 48,50 8,89 44 20,5 25,0 a“C” dimensions is taken when the coupling nut is pulled
27、 in forward position. 4.2 Interface dimensions 4.2.1 Associated connectors See EN 3660-002. 4.2.2 Standard AS85049 interface See Figure 3 and Table 2. All dimensions in millimetres. Figure 3 D A B CR 0,25 0,13 R 0,50 0,13 (100 2)0 0,2 0,79BS EN 3660-018:2009EN 3660-018:2009 (E) 7 Table 2 Shell size
28、A B C D N Number of teeth 0 0,15 max. min. min. mm mm mm mm 09 10,57 8,50 7,59 2,90 12 11 13,56 12,07 10,85 2,90 16 13 16,58 14,96 13,74 2,90 20 15 20,57 18,14 16,92 2,90 24 17 23,57 21,21 20,09 2,90 28 19 25,57 24,00 22,18 2,90 32 21 29,97 27,08 25,96 2,90 36 23 32,56 30,35 29,13 2,90 40 25 35,56 3
29、3,53 32,31 1,70 44 4.3 Material and finish Cable outlet: Class A : Aluminium/black anodised Class N : Aluminium/electroless nickel plated Class W : Aluminium/olive drab cadmium plated Spacer pad: See EN 3660-036. 4.4 Assembly torque These torque values are intended for installation use only. See Tab
30、le 3. Table 3 Shell size Torque Nm 0,5 09 7,8011 10,60 13 15,2015 16,3017 16,30 19 16,3021 19,1023 19,10 25 19,10BS EN 3660-018:2009EN 3660-018:2009 (E) 8 4.5 Tests according to EN 2591-100 Test details to be in accordance with Table 4, EN 3660-001 and EN 2591-100. Qualification to be in accordance
31、with EN 3660-001. Table 4 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housing (shell) electrical continuity X Only class N and W and only if with grounding lug option: 5 m 212 Surfac
32、e transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X According to class Only self-locking version and specify. 305 Rapid change of temperature X 306 Mould growth X See EN 3660-001. 307 Salt mist X Cable outlet not fitted to a connector and suspended with non metallic cord.
33、Duration: Classes A and N 48 h Class W 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X Only self-locking versions and with spacer pad. 316 Ozone resistance X With spacer pad only 317 Flammability X With spacer pad only 318 Fire-resistance X 402 Shock X Method A.
34、Severity: 100 g 403 Sinusoidal and random vibration X Method B. Level J. 406 Mechanical endurance X 10 cycles 408 Mating and unmating forces X See 4.4, Table 3. continued BS EN 3660-018:2009EN 3660-018:2009 (E) 9 Table 4 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3
35、660-001 Details 420 Mechanical strength of rear accessories X Shell size Torque N 09 11 13 15 17 19 21 23 25 108 108 108 217 217 217 326 326 435 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector. Max values: Classes A, N and W 2,0 a1 GHz to 10 GHz under considera
36、tion. 5 Designation EXAMPLE 1 Description blockCABLE OUTLET Identity blockEN3660-018XXXXX Number of this standard Material/Finish class (See 4.3) Coupling nut 1 without self-locking device 2 with self-locking device Strain relief type A without spacer pad and ground lug B with spacer pad and ground
37、lug C with spacer pad and without ground lug D without spacer pad and with ground lug Shell size EXAMPLE 2 EN3660-018A1A09 Style A, cable outlet, aluminium/black anodised, without self-locking, without spacer pad and ground lug, shell size 09. NOTE 1 No gaps are required between sections in the part
38、 number when printed. NOTE 2 If necessary, the code I9005 may be placed between the description block and the identity block. BS EN 3660-018:2009EN 3660-018:2009 (E) 10 6 Marking According to EN 2424, category P. 7 Technical specification Refer to EN 3660-001. BS EN 3660-018:2009This page has been i
39、ntentionally left blank BS EN3660-018:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in E
40、urope and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products
41、 and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offer
42、s members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (
43、0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Informat
44、ion on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Informa
45、tion Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)2
46、08996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in
47、 theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without p
48、rior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: copyrigh
