1、BS EN3660-062:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 062: Cable outlet, style K, 90, forheat shrinkable boot, shielded, sealed,self-lo
2、cking for EN 3645 ProductstandardCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommitte
3、e on 31 January2010. BSI 2009ISBN 978 0 580 67324 5Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-062:2009National forewordThis British Standard is the UK implementation of EN 3660-062:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aero
4、space avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance wit
5、h a British Standard cannot confer immunityfrom legal obligations.Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
6、NORM EN 3660-062 November 2009 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard Srie aro
7、spatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 062: Raccord type K, coud 90, blind, tanche, pour manchon thermortractable, auto-frein pour EN 3645 - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und Re
8、chtecksteckverbinder - Teil 062: Endgehuse, Bauform K, 90, fr wrmeschrumpfende Manschette, Schirmanschlu, abgedichtet, selbstsichernd fr EN 3645 - Produktnorm This European Standard was approved by CEN on 20 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s
9、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Stand
10、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national sta
11、ndards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United K
12、ingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-062:2009: E
13、Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4
14、4 Characteristics . 5 5 Tests 9 6 Designation 14 7 Marking .15 8 Technical specification .15 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (
15、E) 3 Foreword This document (EN 3660-062:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National
16、 Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standar
17、ds shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal
18、 Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
19、 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660
20、-062:2009EN 3660-062:2009 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, 90, shielded, sealed, self-locking, for heat shrinkable boot, for use under the following conditions: The mating connectors are listed in EN 3660-002. Temperature range, Class F : 65 C to 200 C;
21、 Class K : 65 C to 260 C; Class W : 65 C to 175 C. Associated electrical accessories : EN 3660-033 Metallic band (for shield termination backshells). These cable outlets are designed for termination of overall shielding braid or individual cable shields. They accommodate/permit the termination of he
22、at shrinkable boots. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 25
23、91-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3645 (all parts), Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous EN 3660-001:2006, Aerospace series Cable outlet ac
24、cessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN 3660-033, Aerospace series Cable ou
25、tlet accessories for circular and rectangular electrical and optical connectors Part 033: Metallic band Product standard 1)AS85049A, Connector accessories, electrical general specification for 2)DIN 82, Knurling 3 Terms and definitions For the purposes of this document, the terms and definitions giv
26、en in EN 3660-001:2006 apply. *As well as all parts of EN 2591 quoted in this standard. 1) In preparation at the date of publication of this standard. 2) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001. Copyright European Committee for Sta
27、ndardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (E) 5 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1 to Table 4. For cable entry dime
28、nsions, see 4.2. All dimensions are in millimetres. Key 1 “O“ ring 2 Thread C 3 Marking 4 Four holes spaced 90 2,8 for tools, depth = 1,27 5 RAA 1,0 DIN 82 knurling 6 RKV 08 DIN 82 knurling NOTE Valley of start tooth to be at vertical centre line of accessory at position shown: within 3 for shell si
29、zes 09 13; within 2 for shell sizes 15 19; within 1 for shell sizes 21 and larger. Figure 1 Cable outlet 3,4101ER = 0,76RKV 08 DIN 82 knurling.4 Holes spaced 90 2,8 for toolsdeep = 1,27“O“ ringG6,98 0,517,012,0MarkingABThread CDJHStraight knurling.1 2 3 4 5 6Copyright European Committee for Standard
30、ization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (E) 6 Table 1 Fixed dimensions of shell Dimensions in millimetres Shell size A B C D E G H J N max. max. Thread min. max. max. max. max
31、. Numberof teeth 09 21,79 15,24 M12 1,0-6H 6,70 16,76 14,8 10,2 31,05 12 11 24,99 18,21 M15 1,0-6H 9,65 16,76 16,6 13,7 34,21 16 13 29,39 21,18 M18 1,0-6H 12,55 16,76 18,1 16,8 37,95 20 15 32,49 25,14 M22 1,0-6H 15,75 16,76 18,7 17,9 39,65 24 17 35,71 28,12 M25 1,0-6H 18,95 16,76 20,3 21,2 41,25 28
32、19 38,50 31,09 M28 1,0-6H 21,15 16,76 21,3 23,2 43,75 32 21 41,70 34,04 M31 1,0-6H 24,35 16,76 22,8 26,2 46,91 36 23 44,91 36,90 M34 1,0-6H 27,45 16,76 24,4 29,4 50,10 40 25 47,98 39,88 M37 1,0-6H 30,65 16,76 26,1 32,6 53,26 44 Table 2 Mass for classes K, F and W Mass in grams Shell size code End-fi
33、tting size code Classes A B C D E F G H J K L M 09 11,6 12,6 12,8 F, W 33,7 36,6 37,2 K 11 16,4 16,6 17,1 F, W 47,7 48,3 49,7 K 13 20,2 20,4 21,1 F, W 58,7 59,3 61,4 K 15 20,4 20,6 21,6 22,6 F, W 59,3 59,9 62,8 65,7 K 17 25 25,2 25,5 26,5 F, W 72,7 73,3 74,1 77,1 K 19 28,8 30,4 31,4 32,4 F, W 83,7 8
34、8,4 91,3 94,2 K 21 34,3 36,3 F, W 99,7 105,5 K 23 F, W K 25 48,7 50,1 51,5 F, W 141,5 145,7 149,8 K Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062
35、:2009 (E) 7 4.2 Cable entry dimensions See Figure 2 and Table 3. ABCDFigure 2 Cable entry Table 3 Dimensions in millimetres End-fitting size code A B C D Bundle diameter 0,1 0,1 0,3 min. min. max. A 4,7 7,7 12,21,12 2,0 4,0 B 6,4 9,4 14,0 1,12 3,9 5,5 C 7,9 11,0 15,5 1,12 5,4 7,5 D 9,5 12,6 17,1 1,1
36、2 7,4 9,0 E 11,1 14,1 18,7 1,12 9,4 10,5 F 12,7 15,7 20,3 1,12 10,4 12,0 G 15,9 18,9 23,5 1,12 12,4 15,5 H 19,1 22,0 26,7 1,12 15,4 18,5 J 22,2 25,2 29,8 1,75 18,4 21,5 K 25,5 28,4 33,0 1,75 21,4 25,0 L 28,6 31,5 36,2 1,75 25,4 28,0 M 31,8 34,7 39,4 1,75 28,4 31,0 NOTE The cable entry shall be selec
37、ted in accordance with the diameter of the cable to be hardened. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (E) 8 4.3 Associated connecto
38、rs See EN 3660-002. 4.4 Interface dimensions Standard AS85049 interface. See Figure 3 and Table 4. All dimensions are in millimetres. A B1,782,29See Detail ARadius = 0,23 - 0,13Radius = 0,51 - 0,130,8 - 0,20+100 - 1DETAIL ADetail Z Figure 3 - Interface Table 4 Dimensions in millimetres Shell size A
39、B 0 0,15 max. 09 10,57 8,50 11 13,56 12,0713 16,58 14,96 15 20,57 18,1417 23,57 21,21 19 25,57 24,0021 29,97 27,81 23 32,56 30,3525 35,56 33,35 Z RRCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without lic
40、ense from IHS-,-,-BS EN 3660-062:2009EN 3660-062:2009 (E) 9 4.5 Material and finish Material/Finish Class F : Aluminium/Nickel plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class W : Aluminium/Olive drab cadmium plated 4.6 Robustness assembly torque These torque values
41、are intended for installation use only, see Table 5. Table 5 Shell size Assembly torque max. Nm Class K Classes F and W 09 7,6 5,111 10,2 5,1 13 14,2 5,115 15,3 5,1 17 15,3 5,119 15,3 10,2 21 17,8 10,223 17,8 10,2 25 17,8 10,25 Tests 5.1 Tests according to EN 2591-100 Test details to be in accordanc
42、e with Table 6, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-062:2009EN 3660-062:20
43、09 (E) 10 Table 6 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1 and 4.2. 205 Housing (shell) electrical continuity X Cable outlet connector connection add maximum to the values given. Class
44、F: 2,5 m; Class W: 5 m; Class K: 10 m. 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX Frequency Zt (m) MHz Class F Class W Class K 0,1 5 10 20 1 5 10 20 10 7 15 30 30 10 20 40 100 20 40 80 Test mounting as per 4.7.2. The Zt values correspond to the total surface impedance of the assembly.
45、 Test shall be achieved with a same size and class couple connectors EN 3645 (all parts) than the accessory. continued Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-
46、062:2009EN 3660-062:2009 (E) 11 Table 6 (continued) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 213 Shielding effectiveness from 100 MHz to 1 GHz X Frequency Minimum attenuation Classes F and W Class K MHz dB dB 100 90 80 200 88 75 300 88 73 400 87 71 800 85 66
47、1 000 85 65301 Endurance at temperature X 305 Rapid change of temperature X ClassesTATBT1+ 5 0 0 5 C C min. F 200 65 30 W 175 65 30 K 260 65 30 306 Mould growth X See EN 3660-001. 307 Salt mist X Cable outlet not fitted to a connector and suspended with non-metallic cord. Duration: Class F 48 h Class W 500 h Class K 500 h 308 Sand and dust X 314 Immersion a
