1、BRITISH STANDARD AEROSPACE SERIES BS EN 4011:2004 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated Classification: 1 550 MPa (at ambient temperature) / 600 C The European Standard EN 4011:2004 has the status of a British Standard ICS 49.030.
2、30 BS EN 4011:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 5 January 2005 BSI 5 January 2005 ISBN 0 580 45177 1 National foreword This British Standard is the official English language version of EN 4011:2004. It supersedes BS EN 4011
3、:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-referenc
4、es The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British St
5、andards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to t
6、he responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside f
7、ront cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4011 No
8、vember 2004 ICS 49.030.30 Supersedes EN 4011:2003 English version Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 C Srie arospatiale - crous bihexagonaux, freinag
9、e interne, en alliage rsistant chaud base de nickel NI- PH2601 (Inconel 718), argents - Classification : 1 550 MPa ( temprature ambiante ) / 600 C Luft- und Raumfahrt - Zwlfkantmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (b
10、ei Raumtemperatur) / 600 C This European Standard was approved by CEN on 11 September 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date
11、lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re
12、sponsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ir
13、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-
14、1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4011:2004: E EN 4011:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Required characteristics.4 4 Designation 6 5 Marking .6 6 Technical spe
15、cification .6 EN 4011:2004 (E) 3 Foreword This document (EN 4011:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the appro
16、val of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflic
17、ting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 4011:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cze
18、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 4011:2004 (E) 4 1 Scope This standard specifies the ch
19、aracteristics of self-locking bihexagonal nuts in NI-PH2601, silver plated, for aerospace applications. Classification: 1 550 MPa 1)/ 600 C 2)2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited
20、 applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4095, Aerospace Bihexagonal drives Wrenching configuration Metric series ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts EN 2424, Aerospace series Mark
21、ing of aerospace products EN 2786, Aerospace series Electrolytic silver plating of fasteners 3)EN 2952, Aerospace series Heat resisting alloy NI-PH2601 Solution treated and cold worked Bar for forged fasteners D 50 mm 1 270 MPa R m 1 550 MPa 3)EN 4047, Aerospace series Nuts, self-locking, MJ threads
22、, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated Classification: 1 550 MPa (at ambient temperature) / 600 C Technical specification 3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 1. Dimensions and tolerances are in millime
23、tres. They apply after silver plating. 3.2 Material EN 2952 3.3 Surface treatment EN 2786 Thickness: external surfaces: 5 m to 15 m; thread MJ6: 5 m min., shall be measured at the pitch diameter; thread MJ5: shall show complete coverage, without thickness requirement. 1) Correspond to the minimum te
24、nsile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher strength class. 2) Maximum test temperature of the parts 3) Published as AECMA Prestandard at the date of publication of this standard EN 4011:2004 (E) 5 Key 1 valu
25、es applicable before silver plating. Thread surface will be as achieved by normal methods of manufacture. 2 remove sharp edges 0,1 to 0,4. 3 form out-of-round in this area to achieve the self-locking requirement (tooling marks permissible) 4 marking 5 bihexagonal configuration in accordance with ISO
26、 4095 over length M 6 thread 7 not convex 8 pitch diameter Details of form not stated are left to the manufacturers discretion. aAll forms of entry (radius or chamfer) are permissible within these limiting dimensions. Figure 1 Table 1 Thread aE H J K L M N Mass kg/1 000 parts Code Designation max. m
27、in. F max. max. min. min. min. max. Y Z 050 MJ50,8-4H6H 5,8 5,2 7 7 9,1 8,3 2 4,9 1,68 060 MJ61-4H5H 7,1 6,3 8 8,1 10,6 9,8 2,3 5,5 2,4 070 MJ71-4H5H 8,1 7,3 9 9,1 12,1 11,3 2,6 6,1 3,29 080 MJ81-4H5H 9,1 8,3 10 10,4 13,6 12,8 2,8 6,9 0,1 0,2 4,47 100 MJ101,25-4H5H 11,1 10,3 12 13 16,8 15,8 1,2 3,18
28、,8 7,92 120 MJ121,25-4H5H 13,1 12,3 14 15 19,9 18,8 1,4 3,5 10,1 0,13 15,02 140 MJ141,5-4H5H 15,2 14,4 17 17,5 23 21,9 1,7 4 12,6 0,15 0,3 20,38 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply before forming out-of-round. EN 4011:2004 (E) 6 4 Designation EXAMPLE Descri
29、ption block NUT Identity block EN4011-050 Number of this standard Thread code (see Table 1) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking EN 2424, style A, as indicated on Figure 1. 6 Technical specification EN 4047 blankBS EN 4011:
30、2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Stan
31、dards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while usin
32、g this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers au
33、tomatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI websi
34、te at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and i
35、nternational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infob
36、si-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.
37、Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the
38、publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written
39、 permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
