1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4165-024:2011Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 024: Single module plug ProductstandardCopyright Europea
2、n Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4165-024:2011.The UK participation in its
3、 preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. User
4、s are responsible for its correctapplication. BSI 2011ISBN 978 0 580 73660 5ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2011.Amendments issued
5、 since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-024 April 2011 IC
6、S 49.060 English Version Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 C continuous - Part 024: Single module plug - Product standard Srie arospatiale - Connecteurs lectriques rectangulaires, modulaires - Temprature dutilisation 175 C continu - Partie 024
7、 : Fiche mono-module - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder Modularbauweise - Betriebstemperatur 175 C konstant - Teil 024: Freier Steker, fr ein Modul - Produktnorm This European Standard was approved by CEN on 12 February 2011. CEN members are bound to comply
8、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Ma
9、nagement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
10、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port
11、ugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means
12、 reserved worldwide for CEN national Members. Ref. No. EN 4165-024:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 2 Contents Page
13、Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Required characteristics .44.1 Single module plug design .44.2 Class 115 Designation . 126 Marking 127 Technical specification 12Bibliography . 13Copyright European Committee for Standardization Provided by IHS under license with
14、 CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 3 Foreword This document (EN 4165-024:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and
15、 votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standar
16、d, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. C
17、EN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus
18、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standa
19、rdization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 4 1 Scope This European Standard defines the single module plug used in the family of rectangular electrical connectors. The rece
20、ptacle corresponding to this plug is defined in EN 4165-025. Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002. 2 Normative references The fo
21、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products
22、 EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performanc
23、e and contact arrangements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics 4.1 Single module plug design Dimensions and positions of keying polarization see EN 4165-001. Colour of locking system according pol
24、arization, see Clause 5. See Figures 1 to 9. Dimensions are in millimetres. Mass = 10,6 g max. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011
25、 (E) 5 Figure 1 Key 1 Locking side down A = 9,1 min. Figure 2 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 6 Figure 3 Key 1 Module keyi
26、ng 2 Index for rear accessory orientation (opposite side from keying module) 3 Locking slide at connected position: B 3,774,03Figure 4 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS
27、-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 7 Figure 5 Detail of bayonet location Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 8 Figur
28、e 6 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 9 Key 1 Cavity 2 two on flats Figure 7 Copyright European Committee for Standardizatio
29、n Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 10 Figure 8 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or netwo
30、rking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 11 Figure 9 4.2 Class See Table 1. Table 1 Class Description M Receptacle with housing (shell) nickel plated, composite material, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 1
31、75C continuous. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 12 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR PLUG Ident
32、ity block EN4165 M 6 1 A N Number of the basic standard Classes type, see 4.2 M = composite nickel plated Type 6: plug (see EN 4165-002) Number of module Type 1 = Mono module Type A = Module type series 2 (see EN 4165-002) Polarization code: Code Colour N Black A Red B Blue C Green D Yellow E Pink F
33、 Clear green G Clear grey H Light olive J Light olive K Light olive M Light olive P Light olive Q Light olive R Light olive Polarization N to G are mechanically and colour coded (8 polarizations). Polarization H to R are mechanically coded but not colour coded (7 polarizations). 6 Marking Unless the
34、re are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 7 Technical specification See EN 4165-001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without
35、 license from IHS-,-,-BS EN 4165-024:2011EN 4165-024:2011 (E) 13 Bibliography EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product standard1)EN 4165-026, Aerospace series Connectors, electrical, rectangu
36、lar, modular Operating temperature 175 C continuous Part 026: Accessories for single modules Product standard 1) In preparation at the date of publication of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or network
37、ing permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Co
38、mmittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It
39、presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated
40、by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Sta
41、ndard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the
42、 latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be
43、addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI
44、 provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)2
45、0 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8
46、996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international
47、standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of i
