1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4165-026:2011Aerospace series Connectors, electrical, r e c t a n g u l a r , m o d u l a r Operating temperature 175 C continuousPart 026: Accessories for single modules P
2、roduct standardLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4165-026:2011. The UK participation in its preparation was entrusted to T e c h
3、n i c a l Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its
4、correct application. BSI 2011 ISBN 978 0 580 73661 2 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDa
5、te T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-026 April 2011 ICS 49.060 English Version Aerospace series - Connectors, electrical, rectangular,
6、modular -Operating temperature 175 C continuous - Part 026: Accessories for single modules - Product standard Srie arospatiale - Connecteurs lectriques rectangulaires, modulaires - Temprature dutilisation 175 C continu - Partie 026 : Accessoires pour connecteur mono-module - Norme de produit Luft- u
7、nd Raumfahrt - Elektrischer Rechtecksteckverbinder Modularbauweise - Betriebstemperatur 175 C konstant - Teil 026: Endgehuse, fr Steckverbinder, fr ein Modul - Produktnorm This European Standard was approved by CEN on 12 February 2011. CEN members are bound to comply with the CEN/CENELEC Internal Re
8、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN me
9、mber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
10、 CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni
11、a, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nati
12、onal Members. Ref. No. EN 4165-026:2011: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Required characteristics .54.1 A
13、ccessories for shield termination single module connector 54.2 Class 145 Designation . 156 Marking 157 Technical specification 15Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 3 Foreword This document (EN 416
14、5-026:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Serv
15、ices of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the la
16、test by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national
17、standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
18、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 4 1 Scope This European Standard defines accessories for sh
19、ield termination of single modules connectors used in the family of rectangular electrical connectors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the l
20、atest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 3660-033, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 033: Banding bands, style Z, for attachment
21、of screens to cable outlets Product standard 1)EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001
22、 apply. 1) In preparation at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 5 4 Required characteristics 4.1 Accessories for shield termination single module connecto
23、r See attachment principle on Figure 1. Always delivered with attachment system. Key 1 Accessory attachment system consisting of half clips. 2 Accessory system consisting of two half sections permitting the termination of shielding using EN 3660-033 banding strap or equivalent. In case of 45 and 90
24、accessories, numbering system permit to give indication of angular position of the accessory. Figure 1 1 2 1 2 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 6 See Figures 2, 3 and 4. Dimensions are in millim
25、etres. Figure 2 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 7 Figure 3 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011
26、 (E) 8 Figure 4 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 9 4.1.1 Straight accessory See Figures 5 and 6. Dimensions are in millimetres. Mass = 5,6 g max. Figure 5 Licensed Copy: Wang Bin, ISO/EXCHANGE C
27、HINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 10 Figure 6 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 11 4.1.2 Accessory with angle of 45 See Figures 7
28、 and 8. Dimensions are in millimetres. Mass = 7,5 g max. Figure 7 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 12 Key 1 Angular position indication (0 to 7). Figure 8 Licensed Copy: Wang Bin, ISO/EXCHANGE C
29、HINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 13 4.1.3 Accessory with angle of 90 See Figures 9 and 10. Dimensions are in millimetres. Mass = 9 g max. Figure 9 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled
30、Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 14 Figure 10 Key 1 Angular position indication (0 to 7). 4.2 Class See Table 1. Table 1 Class Description M Accessory nickel plated, composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature 175 C continuo
31、us. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBS EN 4165-026:2011EN 4165-026:2011 (E) 15 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR ACCESSORIES Identity block EN4165-026 M 10 Number of the basic standard Classes type, see 4.2
32、 M = composite nickel plated Angular function: 10: Straight, see 4.1.1 20: 45 angle, see 4.1.2 30: 90 angle, see 4.1.3 6 Marking Marking shall be in accordance with EN 2424, category P. 7 Technical specification See EN 4165-001. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15
33、, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSIBSI is t
34、he independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising st
35、andards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to i
36、mprove the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 900
37、1 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards dir
38、ectly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI polic
39、y tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8
40、996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the pu
41、rchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on
42、the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or
43、 transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these detai
44、ls are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/08/2011 09:15, Uncontrolled Copy, (c) BSI
