1、BSI Standards PublicationBS EN 454:2014Food processing machinery Planetary mixers Safety andhygiene requirementsBS EN 454:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 454:2014. Itsupersedes BS EN 454:2000+A1:2009 which is withdrawn.The UK participation i
2、n its preparation was entrusted to TechnicalCommittee MCE/3/5, Food industry machines.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its
3、 correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 76459 2ICS 67.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strate
4、gy Committee on 30 November 2014.Amendments issued since publicationDate Text affectedBS EN 454:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 454 November 2014 ICS 67.260 Supersedes EN 454:2000+A1:2009English Version Food processing machinery - Planetary mixers - Safety and hygiene requir
5、ements Machines pour les produits - Batteurs-mlangeurs - Prescriptions relatives la scurit et lhygine Nahrungsmittelmaschinen - Planetenrhr- und -knetmaschinen - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 6 September 2014. CEN members are bound to comply with
6、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage
7、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat
8、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
9、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN
10、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 454:2014 EBS EN 454:2014EN 454:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions, description and classification .7 3.1 Terms and
11、 definitions .7 3.2 Description .8 3.3 Classification 9 4 List of significant hazards 9 5 Safety and hygiene requirements and/or protective measures . 11 5.1 General . 11 5.2 Mechanical hazards 11 5.2.1 General . 11 5.2.2 Zone 1 Volume covered by the movement of the tool . 12 5.2.3 Zone 2 Auxiliary
12、drive hub (mechanical) . 16 5.2.4 Zone 3 Space between bowl lifting system and frame 16 5.2.5 Loss of stability . 17 5.3 Electrical hazards . 17 5.3.1 General . 17 5.3.2 Safety requirements related to electromagnetic phenomena 17 5.3.3 Protection against electric shock . 17 5.3.4 Power circuits . 17
13、 5.3.5 Protection against earth faults in control circuits . 17 5.4 Motor enclosures 17 5.5 Emergency stop 18 5.6 Thermal hazards . 18 5.7 Gas accumulation hazard 18 5.8 Noise reduction . 18 5.9 Flour dust hazard 18 5.10 Hygiene requirements 18 5.11 Hazards generated by neglecting ergonomic principl
14、es 19 6 Verification of safety and hygiene requirements and/or measures 20 7 Information for use . 21 7.1 General . 21 7.2 Instruction handbook . 21 7.3 Marking 23 Annex A (normative) Noise test code for planetary mixers Grade 2 of accuracy 24 A.1 Installation and mounting conditions . 24 A.2 Operat
15、ing conditions 24 A.3 Measurements . 24 A.4 Emission sound pressure level determination 24 A.5 Sound power level determination . 25 BS EN 454:2014EN 454:2014 (E) 3 A.6 Measurement uncertainties 25 A.7 Information to be recorded . 25 A.8 Information to be reported 26 A.9 Declaration and verification
16、of noise emission values . 26 Annex B (informative) Method of measuring dust . 27 B.1 Purpose of the test 27 B.2 Principle of the tests . 27 B.3 Operating conditions 27 Annex C (normative) Principles of design to ensure the cleanability of planetary mixers . 28 C.1 Terms and definitions . 28 C.2 Mat
17、erials of construction 28 C.3 Design . 29 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 48 Bibliography 49 BS EN 454:2014EN 454:2014 (E) 4 Foreword This document (EN 454:2014) has been prepared by Technical Committee CEN/
18、TC 153 “Machinery intended for use with foodstuffs and feed”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015 and conflicting national standards s
19、hall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 454:2000+A1:2
20、009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2006/42/EC. For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of
21、this document. Significant changes: The significant changes with respect to the previous edition EN 454:2000+A1:2009 are listed below: modification of the numbers of classes of machines (2 instead of 3); solid guard to protect against dust emission was added; safety dimensions for the guard was prci
22、sed; control of the position of the bowl in working position for the Class 1; table of verification of safety and hygiene requirements was completely revised. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement thi
23、s European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki
24、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 454:2014EN 454:2014 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the
25、 scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to
26、 the provisions of this type C standard. BS EN 454:2014EN 454:2014 (E) 6 1 Scope 1.1 This European Standard specifies safety and hygiene requirements for the design and manufacture of fixed bowl planetary mixers with a tool having a planetary movement by using two parallel axes. The capacity of the
27、bowl is greater than or equal to 5 L1)and less than or equal to 200 L. These planetary mixers are used separately in the food industry and shops (catering, bakery, pizza, pastry and confectionary industry) for mixing, kneading and emulsifying/whipping food products (e.g. cocoa, flour, sugar, oils an
28、d fat, eggs, and other ingredients). These machines are fed by hand and sometimes during operation without stopping the machine. Processing is carried out in cycles of variable duration. It can be either manually or automatically controlled, in individual cycles or on a cycle repeat basis, etc. This
29、 European Standard deals with all significant hazards, hazardous situations and events relevant to the transport, installation, adjustment, operation, cleaning, maintenance, dismantling, disassembling and scrapping of planetary mixers, when they are used as intended and under the conditions of misus
30、e which are reasonably foreseeable by the manufacturer(see Clause 4). 1.2 This European Standard does not deal with the following machines: catering attachment for planetary mixers (see EN 12851); continuously fed machines; dough mixers (see EN 453); whipping mixers which contain no parallel axes; s
31、tirring machines; experimental and testing machines under development by the manufacturers; machines used in other industry, for example: meat industry, candy industry, pharmaceutical industry, chemical industry; domestic appliances. 1.3 This European Standard is not applicable to machines which are
32、 manufactured before its date of publication as a European standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated reference
33、s, the latest edition of the referenced document (including any amendments) applies. EN 614-1:2006+A1:2009, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles 1) Below 5 L, EN 60335-1 and the EN 60335-2 series are applicable. BS EN 454:2014EN 454:2014 (E) 7 EN
34、 1672-2:2005+A1:2009, Food processing machinery Basic concepts Part 2: Hygiene requirements EN 12851, Food processing machinery Catering attachments for machines having an auxiliary drive hub Safety and hygiene requirements EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1
35、: General requirements (IEC 60204:2005, modified) EN 60529, Degrees of protection provided by enclosures (IP Code) EN 61000-6-1, Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and light-industrial environments EN ISO 3743-1, Acoustics Determinati
36、on of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room (ISO 3743-1) EN ISO 3744:2010, Acoustics Determination of sound power levels and sound ener
37、gy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 4287, Geometrical product specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287) EN ISO 4871, Ac
38、oustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871) EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field ov
39、er a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13732-1, Ergonomics of the thermal environment - Methods for the assessment of human respon
40、ses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1) EN ISO 13849-1, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1) EN ISO 14119:2013, Safety of machinery - Interlocking devices associated with guards - Principles for
41、design and selection (ISO 14119:2013) 3 Terms, definitions, description and classification 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010 and the following apply. 3.1.1 tool mobile and removable equipment having a planetary movement
42、which is used for mixing, kneading and emulsifying Note 1 to entry: The tool can have different shapes. BS EN 454:2014EN 454:2014 (E) 8 Note 2 to entry: The scraper is considered as a tool in this document. 3.1.2 planetary movement rotation of a tool both on itself and around the inside of a bowl by
43、 using two parallel axes 3.1.3 working position stable position both for the bowl and the tool and in which the bowl is locked in the upper position and the tool, locked on its shaft, is nearest to the bottom of the inside of the bowl 3.2 Description A planetary mixer (see Figure 1) usually consists
44、 of a frame supporting: a casing (1), containing the tool(s) drive mechanism; control devices (2); a bowl (3) equipped with a grid or a solid cover, in which ingredients are processed; interchangeable tool (4) designed to process ingredients; their rotation speed may be either constant or variable;
45、an optional auxiliary drive hub (5) for catering attachments (see EN 12851); a device (6) for vertically moving the bowl or the head of the mixer to allow tool removal, or tilting of the head to remove the tool; a device (7) for handling the bowl (optional), for example a trolley; an interlocked gua
46、rd (8); bowl heating device (optional, not included in Figure 1); bowl cooling device (optional, not included in Figure 1); bowl gravity discharge (optional, not included in Figure 1). BS EN 454:2014EN 454:2014 (E) 9 Key 1 casing 2 control devices 3 bowl 4 tool 5 auxiliary drive hub 6 handle 7 troll
47、ey 8 interlocked guard (solid cover) Figure 1 Main parts of a planetary mixer 3.3 Classification Planetary mixers are classified into the following two categories according to their bowl volume: class 1: bowls having a volume equal to or greater than 5 L and less than 10 L; class 2: bowls having a v
48、olume equal to or greater than 10 L and less than or equal to 200 L, where the bowl volume is the maximum volume of water in litres that the bowl can contain. When a mixer is supplied with several bowls of different capacities, the mixer classification is determined by the size of the bowl with the
49、greatest volume. 4 List of significant hazards This clause contains all the significant hazards, hazardous situations and events, identified by risk assessment as significant for this type of machinery and which require measures to eliminate or reduce the risk associated with the identified hazards (see Table 1). BS EN 454:2014EN 454:2014 (E) 10 Figure 2 shows the danger zones. Table 1 Hazards, hazardous situations and hazardous events Location or cause Clause/subcla
