1、Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch seriesBS EN 4802:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4802 May 2017 ICS 49.080 English Version Aeros
2、pace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series Srie arospatiale - Raccordement bride - Brides flottantes avec 3 trous de fixation, en alliage de nickel -Srie en inches Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Lose Flansche mit 3 Be
3、festigungslchern, aus Nickellegierung - Inch-Reihe This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
4、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
5、 made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E
6、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITT
7、EE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4802:2017 ENational foreword
8、This British Standard is the UK implementation of EN 4802:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publica
9、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 95333 0ICS 49.080Compliance with a British Standard cannot confer immunity from
10、 legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 4802:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4802 May 201
11、7 ICS 49.080 English Version Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series Srie arospatiale - Raccordement bride - Brides flottantes avec 3 trous de fixation, en alliage de nickel -Srie en inches Luft- und Raumfahrt - Rohrverschraubung mit
12、Flanschen - Lose Flansche mit 3 Befestigungslchern, aus Nickellegierung - Inch-Reihe This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o
13、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German
14、). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,
15、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an
16、d United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. N
17、o. EN 4802:2017 EBS EN 4802:2017EN 4802:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Required characteristics . 4 4 Designation . 6 5 Identification marking . 6 6 Technical specification . 6 7 Quality Assurance. 6 BS EN 4802:2017EN 4802:2017 (E) 3 European
18、foreword This document (EN 4802:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National
19、 Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national st
20、andards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regu
21、lations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I
22、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4802:2017EN 4802:2017 (E) 4 1 Scope This European Standard specifies the characteristics of swivel flanges, 3 holes
23、, for flange couplings in nickel alloy for inch series aerospace applications. Nominal pressure: up to 21 000 kPa; depends on the associated seal, tube material, tube diameter and tube wall thickness in the assembly (see EN 4814). NOTE Assembly in accordance with TR 4815. 2 Normative references The
24、following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Ae
25、rospace series Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resisting steels and decontamination of nickel base alloys EN 3671, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Non heat treated Forging stock a or D 250 mm EN 4376, Aerospace series Hea
26、t resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated Bar and section De 200 mm EN 4377, Aerospace series Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) Non heat treated Forging stock a or D 300 mm EN 4379, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb
27、) Solution treated, forging De 200 mm EN 4380, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Bar and section De 200 mm1)EN 4814, Aerospace series Flange couplings up to 21 000 kPa Technical specification Inch series EN 9100, Quality Management Systems Requirements fo
28、r Aviation, Space and Defense Organizations TR 4815, Aerospace series Flange couplings up to 21 000 kPa Design standard Inch series2)3 Required characteristics 3.1 Configuration Dimensions Tolerances Masses See Figure 1 and Table 2. Dimensions and tolerances are in millimetres, except otherwise spec
29、ified. 1)Published as ASD-STAN Prestandard at the date of publication of this European Standard. (http:/www.asd-stan.org/) 2)Published as ASD-STAN Technical Report at the date of publication of this European Standard. (http:/www.asd-stan.org/) BS EN 4802:2017EN 4802:2017 (E) 5 3.2 Material and surfa
30、ce treatment Table 1 Material Code EN 4380 or EN 3671 or EN 4379 1 EN 4376 or EN 4377 2 Surface finish: Passivation EN 2516. Key 1 3D view (for information only) 2 3 equally spaced holes 3 marking 4 location of holes Figure 1 BS EN 4802:2017EN 4802:2017 (E) 6 Table 2 Dimensional codea Nominal diamet
31、er A B C D G H J K N Massb inch mm null0,25 +0,15 0 null0,25 Theo. +0,5 0 min max +0,5 0 +0,15 0 min max 10A .625 15,875 5,20 2,40 20,30 37,3 6,30 5,50 5,70 18,65 28,80 14 16 37,9 10B .625 15,875 5,20 2,40 20,30 40,0 7,50 7,10 7,30 20,00 28,80 14 16 42,9 12A .750 19,050 5,20 2,40 24,40 41,5 6,30 5,5
32、0 5,70 20,75 32,00 2130 2230 43,5 12B .750 19,050 5,20 2,40 24,40 43,1 8,10 7,10 7,30 21,55 32,00 2130 2230 52,4 16A 1.000 25,400 5,20 2,40 30,70 47,1 6,30 5,50 5,70 23,55 38,35 14 16 48,9 16B 1.000 25,400 5,20 2,40 30,70 50,8 9,00 7,10 7,30 25,40 38,35 2130 2230 69,6 20B 1.250 31,750 5,45 2,65 37,3
33、0 59,5 7,25 7,10 7,30 29,75 47,10 2130 2230 81,3 24B 1.500 38,100 6,00 2,95 42,90 65,1 7,25 7,10 7,30 32,55 54,20 14 16 96,4 28B 1.750 44,450 6,20 3,15 50,50 76,1 7,25 7,10 7,30 37,05 60,60 2130 2230 127,7 32C 2.000 50,800 6,20 3,15 56,90 85,3 8,20 8,60 8,90 42,65 70,10 2130 2230 162,8 aThis code is
34、 composed with the following elements : Nominal diameter given in 16thof inches within 2 digit; Bolt nominal thread diameter A: .1900 in (4,826 mm); B: .2500 in (6,35 mm); C: .3125 in (7,938 mm). bMass quoted in kg/1 000 parts. 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed
35、between the description block and the identity block. 5 Identification marking EN 2424, category A, as indicated on Figure 1. 6 Technical specification See EN 4814. 7 Quality Assurance Approval of the manufactures. See EN 9100. BS EN 4802:2017This page deliberately left blankBSI is the national body
36、 responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring togeth
37、er business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organiza
38、tions of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services tea
39、m or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards D
40、evelopment Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as
41、the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploi
42、t, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal compan
43、y use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British St
44、andard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal net
45、work, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you
46、. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in
47、touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard
48、copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users
49、as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your busines
