1、Industrial valves - Metallic butterfly valves for general purposesBS EN 593:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 593 October 2017 ICS 23.060.30 Supersedes EN 593:2009+A1:2011English Version Industria
2、l valves - Metallic butterfly valves for general purposes Robinetterie industrielle - Robinets mtalliques papillon dusage gnral Industriearmaturen - Metallische Klappen fr den allgemeinen Gebrauch This European Standard was approved by CEN on 31 August 2017. CEN members are bound to comply with the
3、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management
4、Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
5、 the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
6、herlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 C
7、EN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 593:2017 ENational forewordThis British Standard is the UK implementation of EN 593:2017. It supersedes BS EN 593:2009+A1:2011, which is withdrawn.The UK participation in its preparati
8、on was entrusted to Technical Committee PSE/18/3, Industrial valves, steam traps, actuators and safety devices against excessive pressure - Part turn valves (Ball, plug and butterfly).A list of organizations represented on this committee can be obtained on request to its secretary.This publication d
9、oes not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93781 1ICS 23.060.30Compliance with a British Standard cannot confer immunity from le
10、gal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 593:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 593 October 20
11、17 ICS 23.060.30 Supersedes EN 593:2009+A1:2011English Version Industrial valves - Metallic butterfly valves for general purposes Robinetterie industrielle - Robinets mtalliques papillon dusage gnral Industriearmaturen - Metallische Klappen fr den allgemeinen Gebrauch This European Standard was appr
12、oved by CEN on 31 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
13、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language
14、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun
15、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG
16、 CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 593:2017 EBS EN 593:2017EN 593:2017 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5
17、 3 Terms and definitions . 7 4 Design requirements . 8 4.1 General 8 4.2 Shell . 10 4.3 Body 10 4.4 Obturator (disc) 13 4.5 Seat seal . 13 4.6 Driving shaft . 13 4.7 Shaft seal . 14 4.8 Optional design features . 14 4.9 Materials 15 4.10 Pressure/temperature ratings 16 4.11 Dimensions and tolerances
18、 17 4.12 Operation 17 4.13 Permanent joining . 19 4.14 Functional characteristics and performances . 19 5 Final assessment 20 5.1 General . 20 5.2 Additional tests . 21 6 Designation. 21 7 Marking and preparation for storage and transportation 21 7.1 Marking 21 7.2 Preparation for storage and transp
19、ortation 22 Annex A (informative) Information to be supplied by the customer . 23 Annex B (informative) Trim material list . 25 Annex C (informative) Environmental corrosion protection 26 Annex D (informative) Correspondence between DN and NPS 27 Annex E (informative) Example for valve shaft calcula
20、tion . 29 E.1 General . 29 E.2 Calculation 30 E.2.1 Shear stress 30 E.2.2 Combined shear stress (at valve bearing) (section 2-2) 30 E.2.3 Combined tensile stress at seating due to torsion and bending (section 2-2) . 30 E.2.4 Shear stress at reduced area (sections 1-1, 3-3, 4-4) 31 E.3 Examples of in
21、fluence of flow velocity/hydrodynamic torques for shaft sizing . 31 BS EN 593:2017EN 593:2017 (E) 3 Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2014/68/EU (Pressure Equipment Directive) aimed to be covered . 34 Bibliography . 35 BS E
22、N 593:2017EN 593:2017 (E) 4 European foreword This document (EN 593:2017) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical
23、text or by endorsement, at the latest by April 2018, and conflicting national standards shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identify
24、ing any or all such patent rights. This document supersedes EN 593:2009+A1:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2014/68/EU. For relationship with EU D
25、irective, see informative Annex ZA, which is an integral part of this document. The main technical changes compared to the previous edition are: a) the extension of the dimensions to cover PN 2,5 to PN 160, Class 150 to Class 900 and DN 20 to DN 4 000; b) the inclusion of single, double and triple e
26、ccentric designs; c) a reference to EN 16668 for valves subject to European legislation on pressure equipment; d) the addition of informative Annex D giving the correspondence between DN and NPS; e) the addition of informative Annex E on valve torque curves at different flow velocities; f) the updat
27、ing of Annex ZA according to the new PED. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Y
28、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 593:2017EN 593:2017 (E) 5 1 Sco
29、pe This European Standard specifies minimum general requirements for butterfly valves having metallic bodies for use with all type of pipe end connections (e.g. wafer, lug, flange, butt welding) and used for isolating, regulating or control applications. The PN and Class ranges are: PN 2,5; PN 6; PN
30、 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; Class 150; Class 300; Class 600; Class 900. The size range is: DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 050;
31、 DN 1 100; DN 1 200; DN 1 400; DN 1 500; DN 1 600; DN 1 800; DN 2 000; DN 2 200; DN 2 400; DN 2 600; DN 2 800; DN 3 000; DN 3 200; DN 3 400; DN 3 600; DN 3 800; DN 4 000. DN 750 and DN 1 050 are used only for Class 150 and Class 300. Intermediate DNs are allowed upon agreement between manufacturer a
32、nd customer. For valves subject to European legislation on pressure equipment, EN 16668 applies together with this European Standard. For industrial process control valves, EN 1349 and EN 60534-2-1 apply together with this European Standard. For water supply application, EN 1074-1 and EN 1074-2 appl
33、y together with this European Standard. NOTE 1 Butterfly valves for water supply application do not comply with Annex ZA and are not CE marked because they are excluded from the pressure equipment European legislation. NOTE 2 The range of DN, applicable to each PN, for wafer and wafer lug valve type
34、s is as given in the appropriate part of EN 1092 for Type 11 flanges for the applicable material. The range of DN, applicable to each PN, for flanged valve types is as given in the appropriate part of EN 1092 for Type 21 flanges for the applicable material. The correspondence between DN and NPS is g
35、iven for information in Annex D. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
36、ced document (including any amendments) applies. EN 19:2016, Industrial valves Marking of metallic valves EN 558:2017, Industrial valves Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems PN and Class designated valves EN 736-1:1995, Valves Terminology Part 1:
37、 Definition of types of valves EN 736-2:2016, Valves Terminology Part 2: Definition of components of valves EN 736-3:2008, Valves Terminology Part 3: Definition of terms EN 1074-2:2000, Valves for water supply Fitness for purpose requirements and appropriate verification tests Part 2: Isolating valv
38、es BS EN 593:2017EN 593:2017 (E) 6 EN 1092-1:2007+A1:2013, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 1: Steel flanges EN 1092-2:1997, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated P
39、art 2: Cast iron flanges EN 1092-3:2003, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 3: Copper alloy flanges EN 1092-4:2002, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 4: Alum
40、inium alloy flanges EN 1267:2012, Industrial valves Test of flow resistance using water as test fluid EN 1759-1:2004, Flanges and their joint Circular flanges for pipes, valves, fittings and accessories, Class designated Part 1: Steel flanges, NPS 1/2 to 24 EN 1759-3:2003, Flanges and their joints C
41、ircular flanges for pipes, valves, fittings and accessories, Class designated Part 3: Copper alloy flanges EN 1759-4:2003, Flanges and their joint Circular flanges for pipes, valves, fittings and accessories, class designated Part 4: Aluminium alloy flanges EN 10269:2013, Steels and nickel alloys fo
42、r fasteners with specified elevated and/or low temperature properties EN 12266-1:2012, Industrial valves Testing of metallic valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2012, Industrial valves Testing of metallic valves Part 2: Tests, test
43、 procedures and acceptance criteria Supplementary requirements EN 12516-1:2014, Industrial valves Shell design strength Part 1: Tabulation method for steel valve shells EN 12516-2:2014, Industrial valves Shell design strength Part 2: Calculation method for steel valve shells EN 12516-3:2002, Valves
44、Shell design strength Part 3: Experimental method EN 12516-4:2014, Industrial valves Shell design strength Part 4: Calculation method for valve shells manufactured in metallic materials other than steel EN 12570:2000, Industrial valves Method for sizing the operating element EN 12627:1999, Industria
45、l valves Butt welding ends for steel valves EN 12982:2009, Industrial valves End-to-end and centre-to-end dimensions for butt welding end valves EN 16668:2016, Industrial valves Requirements and testing for metallic valves as pressure accessories EN 60534-2-3:2016, Industrial-process control valves
46、Part 2-3: Flow capacity Test procedures (IEC 60534-2-3:2015) EN ISO 1043-1:2011, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) EN ISO 5211:2017, Industrial valves Part-turn actuator attachments (ISO 5211:2017) BS EN 593:2017EN 593:2
47、017 (E) 7 EN ISO 9606-1:2017, Qualification testing of welders Fusion welding Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) EN ISO 10497:2010, Testing of valves Fire type-testing requirements (ISO 10497:2010) EN ISO 14732:2013, Welding personnel Qualification testing of weldin
48、g operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) EN ISO 15607:2003, Specification and qualification of welding procedures for metallic materials General rules (ISO 15607:2003) ISO 1629:2013, Rubber and latices Nomenclature ASME B1.1:2003, Unifi
49、ed Inch Screw Threads, (UN and UNR Thread Form) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 736-1, EN 736-2, EN 736-3 and the following apply. 3.1 maximum allowable pressure PS maximum pressure for which the pressure equipment is designed as specified by the manufacturer SOURCE: EN 764-1:2015+A1:2016, 3.2.87 3.2 maximum allowable temperature TSmaxmaximum temperature for which the pressure equi
