1、BS EN 6105:2016Aerospace series Stud withshoulderBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 6105:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 6105:2016.The UK participation in its preparation was entrusted to T
2、echnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplicatio
3、n. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 92622 8ICS 49.030.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on
4、 30 September 2016.Amendments/corrigenda issued since publicationDate Text affectedBS EN 6105:20162“ EN 6105 trsx vrurtr ss trsx 22 “ o CEN-CENELECManagement Centre: Avenue Marnix 17, B-1000 Brussels 9trsx xsrwtrsxBS EN 6105:2016EN 6105:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normat
5、ive references 4 3 Requirements 5 3.1 Configuration, dimensions, tolerances and mass 5 3.2 Material and surface treatment 6 3.3 Mechanical characteristics . 7 3.3.1 General 7 3.3.2 Static values . 7 3.3.3 Installation torque 7 3.4 Operating temperature . 7 4 Designation 7 5 Marking . 7 6 Technical s
6、pecification 7 7 Example of installation 8 BS EN 6105:2016EN 6105:2016 (E) 3 European foreword This document (EN 6105:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules
7、 of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text o
8、r by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for
9、 identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former
10、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 6105:2016EN 6105:2016 (E) 4 1 Scope T
11、his European Standard specifies the dimensions, tolerances, required characteristics and mass of a stud for use in fuselage interior equipment and structural applications. This standard shall be used in conjunction with retaining washer per EN6090A01 (conform to EN 6090) and receptacles per EN 6092
12、or EN 6093. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi
13、ng any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resistant steels and decontamination of nickel base alloys EN 4318, Aerospace series Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) Solution treated and precipita
14、tion treated bar and section, De 100 mm, Rm 960 MPa1)EN 6090, Aerospace series Washer, retaining1)EN 6092, Aerospace series Receptacle, floating, double lug1)EN 6093, Aerospace series Receptacle, floating, single lug1)EN 6094, Aerospace series Washer, spring, countersunk1)EN 6095, Aerospace series R
15、otary fasteners Structural and non-structural applications Technical specification1)ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications SAE-AMS 2700, Passivation of corrosion resistant steels2)SAE-AMS 5629, Steel, corrosion-res
16、istant, bars, wire, forgings, rings and extrusions, 13Cr 8.0Ni 2.2Mo 1.1Al, vacuum induction plus consumable electrode melted, solution heat treated, precipitation hardenable2)SAE-AMS 5737, Steel, corrosion and heat-resistant, bars, wire, forgings and tubing 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, con
17、sumable electrode melted, 1 650 F (899 C) solution and precipitation heat treated2)SAE-AS 8879, Screw threads, UNJ profile, inch controlled radius root with increased minor diameter2)MIL-DTL-83488, Coating, aluminum, high purity3)MIL-S-7742, Screw threads, standard, optimum selected series: general
18、specification for3)NASM 33781, Recess, Offset cruciform, dimensions of recess, gage and driver for4)1) Published as ASD Prestandard at the date of publication of this standard. 2) Published by: SAE International, 400 Commonwealth Drive, Warrendale, P.A., 15096-0001, USA 3) Published by: Department o
19、f Defense (DoD), the Pentagon, Washington, D.C., 20307, USA 4) Published by: Aerospace Industries Association of America, (AIA), 1250 Eye Street, N.W., Washington, D.C. 20005-3924, USA BS EN 6105:2016EN 6105:2016 (E) 5 3 Requirements 3.1 Configuration, dimensions, tolerances and mass The configurati
20、on, dimensions, tolerances and mass shall conform to Figure 1 and Table 2. Dimensions and tolerances are expressed in millimetres. Tolerances not specified shall be in accordance with ISO 2768-1. All dimensions and tolerances apply after surface treatment. All burrs to be removed / sharp edges to be
21、 broken. Key 1 Grip range 3 Recess no. 10 per NASM33781 2 Marking, see Clause 5 4 0.1640-32UNJC-3B thread per SAE-AS8879, 2 lead or 0.1640-32UNC-3B thread per MIL-S-7742, 2 lead a Optional version Figure 1 Configuration, dimensions and tolerances BS EN 6105:2016EN 6105:2016 (E) 6 Table 1 Dimensions,
22、 tolerances and mass Size code Grip range L X Z Mass (Ref) min. max. 0,25 min. +2,0 0 kg/1 000 pieces 010a3,81 4,59 10,92 8,0 5,0 1,63 015 4,60 6,39 11,71 9,0 1,70 020 6,40 7,35 12,70 9,8 1,83 030 7,36 9,15 14,48 11,4 7,0 2,04 040 9,16 10,90 16,26 12,0 8,0 2,31 050 10,91 12,70 18,03 13,0 2,55 060 12
23、,71 14,50 19,81 2,91 070 14,51 16,25 21,59 3,26 080 16,26 18,00 23,37 3,62 090 18,01 19,80 25,15 3,97 100 19,81 21,60 26,92 4,30 110 21,61 23,38 28,70 4,66 120 23,39 25,16 30,48 5,01 130 25,17 26,93 32,26 5,37 140 26,94 28,72 34,04 5,70 150 28,71 30,50 35,82 6,06 160 30,51 32,29 37,60 6,42 aNot for
24、new design 3.2 Material and surface treatment See Table 2. Table 2 Material and surface treatment Material Surface treatmentFinish code Corrosion resistant steel per SAE-AMS5629 H1050 or corrosion resistant steel per SAE-AMS5737 or heat resisting alloy per EN 4318 or equivalent Passivated per SAE-AM
25、S2700 or EN 2516 - IVD coating per MIL-DTL-83488 type II, class 3 V BS EN 6105:2016EN 6105:2016 (E) 7 3.3 Mechanical characteristics 3.3.1 General All mechanical characteristics are valid in conjunction with receptacles per EN 6092 and EN 6093 only. 3.3.2 Static values Ultimate tension load: 6 300 N
26、. NOTE Ultimate tension load of fastening system in combination with receptacle EN 6092 or EN 6093 is 6 000 N. Ultimate shear load: 9 000 N. 3.3.3 Installation torque The installation torque with receptacles per EN 6092 and EN 6093 shall be 2,8 Nm to 3,2 Nm. 3.4 Operating temperature This stud shall
27、 be used in the temperature range of 55 C to 150 C. 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking EN 2424, style C. 6 Technical specification EN 6095. BS EN 6105:2016EN 6105:2016 (E) 8 7 Example of installation
28、 See Figure 2. Key 1 Washer EN 6094 2 Panel 3 Washer EN6090A01 4 Stud EN 6105 5 Receptacle EN 6092 or EN 6093 Figure 2 Example of installation This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information a
29、nd services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experien
30、ce and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Informat
31、ion on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, inc
32、luding British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BS
33、I publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for comm
34、ercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs pri
35、or written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the s
36、ole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be fur
37、ther reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extracts
38、For permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discoun
