1、BSI Standards PublicationBS EN 845-2:2013Specification for ancillarycomponents for masonryPart 2: LintelsBS EN 845-2:2013Incorporating corrigendum September 2013BS EN 845-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845-2
2、:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfor lintels available throughout the CEN member countries. It aimsto do so in product performance terms, avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels ava
3、ilable throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides ani
4、nformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.If CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product m
5、anufacturerclaims compliance with the “harmonized” requirements given in thenormative text of the product standard. These relate to the essentialrequirements of the EU Construction Products Directive. Not allproduct characteristics need necessarily be given on the CE marking,but those product charac
6、teristics covered by regulations in force ineach EU Member State, where the manufacturer intends that theproduct will be used, do need to be stated.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this co
7、mmittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79412 4ICS 91.060.
8、10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-2:2013 BRITISH STANDARDNat
9、ional forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845-2:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfor lintels available throughout the CEN member countries. It aimsto do so in product performance terms,
10、avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels available throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are simil
11、ar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.If CE marking is pe
12、rformed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product manufacturerclaims compliance with the “harmonized” requirements given in thenormative text of the product standard. These relate to the essentialrequirements of the EU Construction Products Directi
13、ve. Not allproduct characteristics need necessarily be given on the CE marking,but those product characteristics covered by regulations in force ineach EU Member State, where the manufacturer intends that theproduct will be used, do need to be stated.The UK participation in its preparation was entru
14、sted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The Brit
15、ish Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79412 4ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on
16、 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845-2:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfo
17、r lintels available throughout the CEN member countries. It aimsto do so in product performance terms, avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels available throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduc
18、tion control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requ
19、irements other than those containedin the normative parts of this European Standard.If CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product manufacturerclaims compliance with the “harmonized” requirements given in thenormative text of
20、the product standard. These relate to the essentialrequirements of the EU Construction Products Directive. Not allproduct characteristics need necessarily be given on the CE marking,but those product characteristics covered by regulations in force ineach EU Member State, where the manufacturer inten
21、ds that theproduct will be used, do need to be stated.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to includ
22、e all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79412 4ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.T
23、his British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedStandards Policy and Strategy Committee on 31 August 2013.Amendments/corrigenda issued since publicationBS EN 845-2:2013EUROPEAN S
24、TANDARD NORME EUROPENNE EUROPISCHE NORMEN 845-2 May 2013 ICS 91.080.30 Supersedes EN 845-2:2003English Version Specification for ancillary components for masonry - Part 2: Lintels Spcifications pour composants accessoires de maonnerie - Partie 2: LinteauxFestlegungen fr Ergnzungsbauteile fr Mauerwer
25、k - Teil2: Strze This European Standard was approved by CEN on 21 March 2013.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli
26、ographical references concerning such nationalstandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib
27、ility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic
28、of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIO
29、NEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 845-2:2013: EBS EN 845-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK i
30、mplementation of EN 845-2:2013. It supersedes BS EN 845-2:2003 which will be withdrawn on 30 November 2013.EN 845-2 is the subject of transitional arrangements agreed under the Commission mandate. The Member States have agreed a transition period for the co-existence of EN 845-2 and their correspond
31、ing national standard(s). At the end of this co-existence period, that is at the end of November 2013, BS EN 845-2:2003 will be superseded and withdrawn.echnical Committee B/519, Masonry and associated testing.Date Text affected30 September 2013 Correction to supersession detailsISBN 978 0 580 84265
32、 8Standards Policy and Strategy Committee on 31 August 2013.BS EN 845-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845-2:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfor linte
33、ls available throughout the CEN member countries. It aimsto do so in product performance terms, avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels available throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduction co
34、ntrol, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requirement
35、s other than those containedin the normative parts of this European Standard.If CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product manufacturerclaims compliance with the “harmonized” requirements given in thenormative text of the pro
36、duct standard. These relate to the essentialrequirements of the EU Construction Products Directive. Not allproduct characteristics need necessarily be given on the CE marking,but those product characteristics covered by regulations in force ineach EU Member State, where the manufacturer intends that
37、 theproduct will be used, do need to be stated.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all t
38、he necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79412 4ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This Bri
39、tish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845
40、-2:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfor lintels available throughout the CEN member countries. It aimsto do so in product performance terms, avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels a
41、vailable throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides a
42、ninformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.If CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product
43、 manufacturerclaims compliance with the “harmonized” requirements given in thenormative text of the product standard. These relate to the essentialrequirements of the EU Construction Products Directive. Not allproduct characteristics need necessarily be given on the CE marking,but those product char
44、acteristics covered by regulations in force ineach EU Member State, where the manufacturer intends that theproduct will be used, do need to be stated.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this
45、committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79412 4ICS 91.06
46、0.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-2:2013 BRITISH STANDARDN
47、ational forewordThis British Standard is the UK implementation of EN 845-2:2013. Itsupersedes BS EN 845-2:2003 which is withdrawn.EN 845-2 specifies the characteristics and performance requirementsfor lintels available throughout the CEN member countries. It aimsto do so in product performance terms
48、, avoiding as far as possibleprescriptive requirements and all the traditional designations oflintels available throughout Europe. EN 845-2 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are sim
49、ilar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-2. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.If CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product manufacturerclaims compliance with the “harmonized” requirements given in thenormative text of the product standard. These relate to the essentialrequirements of the EU Construc
