1、BRITISH STANDARDBS EN 859:2007Safety of woodworking machines Hand fed surface planing machinesICS 79.120.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g4
2、7g36g58+A1:2009 BS EN +A2:2012National forewordThis British Standard is the UK implementation of EN 859:2007+A1:2009. It supersedes BS EN 859:2007 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text
3、carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can be obtained on request to its se
4、cretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 859:2007+A1:2009This British Standard was published under the auth
5、ority of the Standards Policy and Strategy Committee on 30 April 2009 BSI 2010Amendments/corrigenda issued since publicationDate Comments 28 February 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62126 0National forewordThis British Standard is the UK implementation of EN 859:2007+A1:20
6、09. It supersedes BS EN 859:2007 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK par
7、ticipation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respons
8、ible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 859:2007+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2009 BSI 2010Amendments/corrigenda issued since p
9、ublicationDate Comments 28 February 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62126 0This British Standard is the UK implementation of EN 859:2007+A1:2009. It supersedes BS EN 859:2007 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in
10、 the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented o
11、n this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.This British Standa
12、rd was published under the authority of the Standards Policy and Strategy Committee on 30 April 2009 BSI 2010corrigenda issued since publication28 February 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62126 0BS EN 859:2007+A2:2012ISBN 978 0 580 76101 0Amendments/corrigenda issued since
13、 publicationDate Comments28 February 2012 Implementation of CEN amendment A1:200931 July 2012 Implementation of CEN amendment A2:2012This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2009 The British Standards Institution 2012. Publish
14、ed by BSI Standards Limited 2012This British Standard is the UK implementation of EN 859:2007+A2:2012. It supersedes BS EN 859:2007+A1:2009, which is withdrawn.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 859:2007+A2 June 2012 ICS 79.120.10 Supersedes EN 859:2007+A1:2009English Version Safet
15、y of woodworking machines - Hand fed surface planing machines Scurit des machines pour le travail du bois - Machines dgauchir avance manuelle Sicherheit von Holzbearbeitungsmaschinen - Abrichthobelmaschinen mit Handvorschub This European Standard was approved by CEN on 10 May 2007 and includes Amend
16、ment 1 approved by CEN on 24 October 2009 and Amendment 2 approved by CEN on 13 May 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li
17、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
18、r the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
19、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITE
20、E FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 859:2007+A2:2012: EEN 859:2007+A2:2012 (E) 2 Contents Page Foreword 4Introduction .51 Scope 62 Normative referen
21、ces 63 Terms and definitions .83.1 General 83.2 Definitions 83.3 Terms . 104 List of significant hazards . 125 Safety requirements and/or measures . 145.1 General . 145.2 Controls . 145.2.1 Safety and reliability of control systems 145.2.2 Position of controls 155.2.3 Starting 155.2.4 Normal stoppin
22、g . 165.2.5 Emergency stop 175.2.6 Failure of the power supply . 175.2.7 Failure of the control circuit 175.3 Protection against mechanical hazards . 185.3.1 Stability 185.3.2 Hazard of break up during operation 185.3.3 Cutterblock holder and cutterblock design . 185.3.4 Braking . 185.3.5 Work piece
23、 supports and guides 195.3.6 Prevention of access to moving parts 235.3.7 Characteristics of guards 275.3.8 Safety appliances 275.4 Protection against non-mechanical hazards . 285.4.1 Fire . 285.4.2 Noise 285.4.3 Emission of chips and dust . 295.4.4 Electricity . 305.4.5 Ergonomics and handling 315.
24、4.6 Pneumatics 325.4.7 Hydraulics 325.4.8 Electromagnetic compatibility . 325.4.9 Supply disconnection (isolation) 325.4.10 Static electricity 335.4.11 Maintenance 336 Information for use . 336.1 General . 336.2 Marking 336.3 Instruction handbook . 34Annex A (normative) Tests for bridge type guards
25、for surface planing machines . 38A.1 General . 38A.2 Compression test 38A.3 Shock test 38BS EN 859:2007+A2:2012EN 859:2007+A2:2012 (E)EN 859:2007+A2:2012 (E) 3 A.4 Strength test 38Annex B (normative) Table lip resistance test . 40B.1 General . 40B.2 Work piece . 40B.3 Measurements . 43B.4 Test . 43B
26、.5 Result 44Annex C (normative) Stability test for displaceable machines 45Annex D (normative) Impact test method for guards 46D.1 General . 46D.2 Test method . 46D.2.1 Preliminary remarks 46D.2.2 Testing equipment . 46D.2.3 Projectile for guards 46D.2.4 Sampling. 46D.2.5 Test procedure . 47D.3 Resu
27、lts 47D.4 Assessment . 47D.5 Test report 47D.6 Test equipment for impact test 47Annex E (normative) Braking tests . 51E.1 Conditions for all tests 51E.2 #Un-braked$ run-down time 51E.3 Braked run-down time . 51Annex ZA (informative) !Relationship between this European Standard and the Essential Requ
28、irements of EU Directive 2006/42/EC“ 53Bibliography 56BS EN 859:2007+A2:2012EN 859:2007+A2:2012 (E)EN 859:2007+A2:2012 (E) 4 Foreword This document (EN 859:2007+A2:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This
29、 European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December 2012. Attention is drawn to the possibility that some of
30、the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-10-24 and Amendment 2, approved by CEN on 2012-05-13. The start and finish of
31、 text introduced or altered by amendment is indicated in the text by tags! “ and # $. This document supersedes #EN 859:2007+A1:2009$. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements o
32、f the #Machinery EU Directive$. #For relationship with Machinery EU Directive, see informative Annex ZA, which is an integral part of this document.$ Organisation contributing to the preparation of this document include the European Association of Manufacturer of Woodworking Machines “EUMABOIS“. The
33、 European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B standards on the subject of general safety (see introduction of #EN ISO 12100:2010$ for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the
34、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl
35、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 859:2007+A2:2012EN 859:2007+A2:2012 (E)EN 859:2007+A2:2012 (E) 5 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming t
36、o the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as stated in #EN ISO 12100:2010$. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of thi
37、s document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this ty
38、pe C standard. The requirements of this document are directed to manufacturers and their authorised representatives of hand fed surface planing machines. They are also useful for designers and importers. This document also includes examples of provisions and examples of information to be provided by
39、 the manufacturer to the user. Common requirements for tooling are given in #EN 847-1:2005+A1:2007$. BS EN 859:2007+A2:2012EN 859:2007+A2:2012 (E)EN 859:2007+A2:2012 (E) 6 1 Scope This document !specifies all significant“ hazards, hazardous situation and events as listed in Clause 4 relevant to stat
40、ionary and displaceable hand fed surface planing machines fitted or not with demountable power feed unit hereinafter referred to as “machines“ designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer #including
41、 reasonably foreseeable misuse$. #Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood.$ This document does not apply to: a) machines set up on a bench or a table similar to a bench, which is in
42、tended to carry out work in a stationary position, capable of being lifted by one person by hand; NOTE 1 Transportable motor-operated electric tools are dealt with by #EN 61029-1:2009$ together with #EN 61029-2-3:2009$. b) hand held planers or any adaptation permitting their use in a different mode,
43、 i.e. bench mounting. NOTE 2 Hand-held motor-operated electric tools are dealt with by #EN 60745-1:2009$ together with #EN 60745-2-14:2009$. This document is not applicable to hand fed surface planing machines which are manufactured before the date of its publication as EN. NOTE 3 Machines covered b
44、y this document are listed under #2$ of Annex IV of the Machinery Directive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer
45、enced document (including any amendments) applies. !deleted text“ #EN 847-1:2005+A1:2007$, Tools for woodworking Safety requirements Part 1: Milling tools, circular saw blades #deleted text$ #EN 1005-2:2003+A1:2008$, Safety of machinery Human physical performance Part 2: Manual handling of machinery
46、 and component parts of machinery #EN 1005-4:2005+A1:2008$, Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery #EN 1037:1995+A1:2008$, Safety of machinery Prevention of unexpected start-up EN 50178:1997, Electronic equipment f
47、or use in power installations EN 50370-1:2005, Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission BS EN 859:2007+A2:2012EN 859:2007+A2:2012 (E)EN 859:2007+A2:2012 (E) 7 EN 50370-2:2003, Electromagnetic compatibility (EMC) Product family standard for machin
48、e tools Part 2: Immunity EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60439-1:19991), Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) EN
49、 60529:19912), Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) !EN 61310-1:2008, Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:2007)“ EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modifie
