EJ 1042-2014 0625 Containers for low and intermediate level radioactive solid waste Steel drum《低、中水平放射性固体废物容器钢桶》.pdf

相关资源

DL T 1281-2013 燃煤电厂固体废物贮存处置场污染控制技术规范.pdf

HJ 85-2005 长江三峡水库库底固体废物清理技术规范.pdf

HJ 588-2010 农业固体废物污染控制技术导则.pdf

HJ T 299-2007 固体废物浸出毒性浸出方法硫酸硝酸法.pdf

JB 9052-1999 热处理盐浴有害固体废物污染管理的一般规定.pdf

JB T 7519-1994 热处理盐浴（钡盐、硝盐）有害固体废物分析方法.pdf

HJ T 85-2002 长江三峡水库库底固体废物清理技术规范（试行）.pdf

HJ T 5.2-1993 核设施环境保护管理导则 放射性固体废物浅地层处置环境影响报告书的格式与内容.pdf

HJ 711-2014 固体废物酚类化合物的测定气相色谱法.pdf

HJ 712-2014 固体废物总磷的测定偏钼酸铵分光光度法.pdf

猜你喜欢

BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf

BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf

BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf

BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf

BS A 357-2000 Inserts with clearance hole in metallic material coated or uncoated - Dimensions《金属材料制的涂覆或未涂覆的带间隙孔的衬套 尺寸》.pdf

BS A 358-1-2000 MJ threads - General requirements《MJ螺纹 一般要求》.pdf

BS A 358-2-2000 MJ threads - Limit dimensions for bolts and nuts《MJ螺纹 螺栓和螺母的极限尺寸》.pdf

BS A 358-3-2000 MJ threads - Limit dimensions for fittings for fluid systems《MJ螺纹 流体系统用的接头的极限尺寸》.pdf

BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf