1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressorsPart 4: RequirementsBS EN 145114:2018EUROPEAN STANDARD NORME EUROPENNE EU
2、ROPISCHE NORM EN 14511-4 March 2018 ICS 27.080; 91.140.30 Supersedes EN 14511-4:2013English Version Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements Climatiseurs, groupes refroidi
3、sseurs de liquide et pompes chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entran par moteur lectrique - Partie 4: Exigences Luftkonditionierer, Flssigkeitskhlstze und Wrmepumpen fr die Raumbeheizung und -khlung und Prozess-Khler mit elektri
4、sch angetriebenen Verdichtern - Teil 4: Anforderungen This European Standard was approved by CEN on 31 December 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without a
5、ny alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langu
6、age made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
7、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMM
8、ITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14511-4:2018 ENationa
9、l forewordThis British Standard is the UK implementation of EN 145114:2018. It supersedes BS EN 145114:2013, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/17, Testing of air conditioning units.A list of organizations represented on this committee
10、 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 91335 8ICS 27.080; 91.
11、140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 145114:
12、2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14511-4 March 2018 ICS 27.080; 91.140.30 Supersedes EN 14511-4:2013English Version Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Req
13、uirements Climatiseurs, groupes refroidisseurs de liquide et pompes chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entran par moteur lectrique - Partie 4: Exigences Luftkonditionierer, Flssigkeitskhlstze und Wrmepumpen fr die Raumbeheizung u
14、nd -khlung und Prozess-Khler mit elektrisch angetriebenen Verdichtern - Teil 4: Anforderungen This European Standard was approved by CEN on 31 December 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
15、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Frenc
16、h, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,
17、Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
18、Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me
19、mbers. Ref. No. EN 14511-4:2018 EBS EN 145114:2018EN 14511-4:2018 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Operating requirements . 4 4.1 General 4 4.2 Temperature operating range 5 4.2.1 Starting and operating tests 5 4.3 Outside the
20、 operating range . 8 4.4 Freeze-up test in cooling mode 8 4.5 Shutting off the heat transfer medium flows 9 4.6 Complete power supply failure 9 4.7 Condensate draining and enclosure sweat test 9 4.8 Other requirements 10 5 Marking 10 6 Technical data sheet . 11 6.1 General description . 11 6.2 Perfo
21、rmance characteristics 11 6.2.1 Rating characteristics . 11 6.2.2 Additional characteristics . 11 6.2.3 Sound characteristics . 12 6.3 Electrical characteristics . 12 6.4 Operating range 12 7 Instructions 12 7.1 General . 12 7.2 Physical description 12 7.2.1 Refrigerant, air and/or liquid circuits 1
22、2 7.2.2 Additional heating devices, when integral to the unit 13 7.2.3 Control and safety 13 7.3 Instructions for installation . 13 7.4 Instruction for maintenance 13 7.5 Instructions to test houses 13 Bibliography . 14 BS EN 145114:2018EN 14511-4:2018 (E) 3 European foreword This document (EN 14511
23、-4:2018) has been prepared by Technical Committee CEN/TC 113 “Heat pumps and air conditioning units”, the secretariat of which is held by UNE. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Septe
24、mber 2018, and conflicting national standards shall be withdrawn at the latest by March 2021. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN not be held responsible for identifying any or all such patent rights. This document
25、 supersedes EN 14511-4:2013. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The main change with respect to the previous edition is the revision and simplification of the tests. EN 14511, Air conditioners, liquid chill
26、ing packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors currently comprises the following parts: Part 1: Terms and definitions Part 2: Test conditions Part 3: Test methods Part 4: Requirements According to the CEN/CENELEC Internal Regulati
27、ons, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy
28、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 145114:2018EN 14511-4:2018 (E) 4 1 Scope 1.1 The scope of EN 14511-1 is applicable, with the exception of process chill
29、ers. 1.2 This European Standard specifies minimum operating requirements which ensure that air conditioners, heat pumps and liquid chilling packages using either air, water or brine as heat transfer media, with electrical driven compressors are fit for the use designated by the manufacturer when use
30、d for space heating and/or cooling. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition o
31、f the referenced document (including any amendments) applies. EN 12102, Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling Measurement of airborne noise Determination of the sound power level EN 14511-1:2018, Ai
32、r conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 1: Terms and definitions EN 14511-2:2018, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space hea
33、ting and cooling and process chillers, with electrically driven compressors Part 2: Test conditions EN 14511-3:2018, Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 3: Test methods EN 60204-1, Saf
34、ety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1) EN 60335-2-40, Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40) EN 61000-3-11, Electromagne
35、tic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems Equipment with rated current 20 TWB= 0,6414* TDB+ 1,5931 Deviation between individual values and set values shall be between: zero and minus twice the permis
36、sible deviation according to EN 14511-3:2018, Table 4 for the upper limit of use; zero and plus twice the permissible deviation according to EN 14511-3:2018, Table 4 for the lower limit of use. Uncertainty of measurement shall be as specified in EN 14511-3:2018, Table 1. The tests shall be performed
37、 at every condition stated in Tables 2 to 9, accordingly to the type of unit and in both cooling and heating mode, where applicable. For a starting test, the unit shall start and operate in the temperature conditions stated in Tables 2 to 9 during 15 min. For an operating test, the unit shall be abl
38、e to operate during 1h in the temperature conditions stated in Tables 2 to 5. The unit motor shall operate without tripping of the motor overload protective devices. 4.2.1.2 Heating mode The following Figure 1 provides an example of the operating range as declared by the manufacturer. The temperatur
39、e values are not necessarily relevant. BS EN 145114:2018EN 14511-4:2018 (E) 6 Key 1, 2 test points 3 inlet temperature at outdoor heat exchanger in C 4 inlet temperature at indoor heat exchanger in C Figure 1 Example of operating range of a unit in heating mode Table 2 Operational requirements condi
40、tions for air-to-air units Test point Test 1 Starting 2 Operating Table 3 Operational requirements conditions for air-to-water units Test point Water flow rate at indoor heat exchanger Test 1 Minimum Starting 2 Minimum Operating Table 4 Operational requirements conditions for water(brine)-to-water u
41、nits Test point Water flow rate at indoor heat exchanger Water flow rate at outdoor heat exchanger Test 1 Minimum Minimum Starting 2 Minimum Minimum Operating BS EN 145114:2018EN 14511-4:2018 (E) 7 Table 5 Operational requirements conditions for water(brine)-to-air units Test point Water flow rate a
42、t indoor heat exchanger Test 1 Minimum Starting 2 Minimum Operating 4.2.1.3 Cooling mode The following Figure 2 provides an example of the operating range as declared by the manufacturer. The temperature values are not necessarily relevant. Key 1, 2 test points 3 inlet temperature at indoor heat exc
43、hanger in C 4 inlet temperature at outdoor heat exchanger in C Figure 2 Example of operating range of a unit in cooling mode Table 6 Operational requirements conditions for air-to-air units Test point Test 1 Starting 2 Starting Table 7 Operational requirements conditions for air-to-water units Test
44、point Water flow rate at indoor heat exchanger Test 1 Minimum Starting 2 Maximum Starting BS EN 145114:2018EN 14511-4:2018 (E) 8 Table 8 Operational requirements conditions for water(brine)-to-water units Test point Water flow rate at indoor heat exchanger Water flow rate at outdoor heat exchanger T
45、est 1 Maximum Minimum Starting 2 Maximum Minimum Starting Table 9 Operational requirements conditions for water(brine)-to-air units Test point Water flow rate at outdoor heat exchanger Test 1 Maximum Starting 2 Maximum Starting 4.3 Outside the operating range If operating outside the temperature ran
46、ge can cause damage to the unit, it shall be provided with safety devices which ensure that the unit suffers no damage when the operating limits of use indicated by the manufacturer are exceeded and remains capable of operating when coming back within these limits. A safety device that does not auto
47、matically reset may trip provided that a warning device is fitted. The manufacturer shall indicate any safety devices provided and their operating conditions according to 7.2.3. 4.4 Freeze-up test in cooling mode The test shall be performed on air-to-air and water(brine)-to-air units in the cooling
48、mode for checking the consequences of a possible freeze-up of the air on the indoor side. After the unit has operated for 6 h at the conditions stated in Table 10, or after the last freeze up cycle has completed after these 6 h, the following requirements shall be fulfilled: no ice shall have accumu
49、lated on the evaporator; no ice shall drip from the unit; no water shall drip or be blown off the unit into the room. BS EN 145114:2018EN 14511-4:2018 (E) 9 Table 10 Freeze up test conditions Unit type Temperature at outdoor heat exchanger Indoor heat exchanger Air temperatures Air flow rate Set point temperature Dry bulb C Wet bulb C All types Lowest condition of the operating range (see Figure 2) 21 15 Minimum setting as allowed by the manufacturer Lowest set point For
