1、BRITISH STANDARDBS EN 14710-1:2005 +A2:2008Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 1: Classification, general and safety requirementsICS 13.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g5
2、4g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14710-1:2005+A2:2008This British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on 22 March 2005 BSI 2009ISBN 978 0 580 61787 4National forewordThis British Standard is the UK
3、implementation of EN 14710-1:2005+A2:2008. It supersedes BS EN 14710-1:2005+A1:2008which is withdrawn.The start and finish of text introduced or altered by amendment is indicated inthe text by tags. Tags indicating changes to CEN text carry the number of theCEN amendment. For example, text altered b
4、y CEN amendment A1 isindicated by !“. The UK participation in its preparation was entrusted by Technical CommitteeFSH/17, Fire brigade equipment, to Subcommittee FSH/17/4, Pumps.A list of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does
5、not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity fromlegal obligations.Amendments/corrigenda issued since publicationDate CommentsImplementation of CEN amendment A1:200830 Sep
6、tember 2008Implementation of CEN amendment A2:200830 September 2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14710-1:2005+A2 December 2008 ICS 13.220.10; 23.080 Supersedes EN 14710-1:2005+A1:2008 English Version Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1
7、: Classification, general and safety requirementsPompes usage incendie - Pompes centrifuges usage incendie sans dispositif damorage - Partie 1: Classification, prescriptions gnrales et de scurit Feuerlschpumpen - Feuerlschkreiselpumpen ohne Entlftungseinrichtung - Teil 1: Klassifizierung, allgemeine
8、 Anforderungen und Sicherheitsanforderungen This European Standard was approved by CEN on 17 December 2004 and includes Amendment 1 approved by CEN on 6 June 2008 and Amendment 2 approved by CEN on 16 November 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stip
9、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard
10、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standa
11、rds bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United King
12、dom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14710-1:2005+A2:2
13、008: EBS EN 14710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 2 Contents Page Foreword 30 Introduction 41 Scope 52 Normative references 63 Terms and definitions .74 List of significant hazards . 135 Safety requirements and/or protective measures . 156 General and performance requirements 187 Verificat
14、ion of the safety requirements and/or protective measures 198 Verification of the general and performance requirements . 209 Classification and brief designation . 2010 Designation . 2211 Information for use . 22Annex ZA (informative) Relationship between this European Standard and the Essential Req
15、uirements of EU Directive 98/37/EC . 29Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 30Bibliography . 31Figures Figure 1 Characteristic curve for the pressure in the outlet section pa (principle) . 11 Figure 2 General w
16、arning sign ISO 7010-W001 . 23 Tables Table 1 List of significant hazards . 14 Table 2 Fire-fighting centrifugal pumps with nominal delivery pressures of 6 bar 21 Table 3 Fire-fighting centrifugal pumps with nominal delivery pressures of 10 bar 21 Table 4 Fire-fighting centrifugal pumps with nominal
17、 delivery pressures of 15 bar 22 BS EN 14710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 3 Foreword This document (EN 14710-1:2005+A2:2008) has been prepared by Technical Committee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the s
18、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document supersedes #EN 14710-1:2005+A1:2008$ This document includes Amendment 1, approve
19、d by CEN on 2008-06-06 and Amendment 2, approved by CEN on 2008-11-16. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and # $. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Asso
20、ciation, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This document is intended to be used in conjunction with part 2 of EN 14710 “Verification of general and safety requ
21、irements”. EN 14710 “Fire-fighting pumps Fire-fighting centrifugal pumps without primer“ comprises two parts: Part 1: Classification, general and safety requirements; Part 2: Verification of general and safety requirements. For relationship with EN 1028 see EN 14710-2:2005, 4.1. This document includ
22、es a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
23、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 14710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 4 0 Introduction This document is a type C standard as stated in EN ISO 12
24、100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. Where provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard
25、 take precedence over the provisions of the other standards, for machines that have been designed and built in accordance with the provisions of this type C standard. While producing this document it was assumed that: a) only trained persons operate the machine; b) the original characteristics are m
26、aintained provided components are kept in good repair and working order. BS EN 14710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 5 1 Scope This document applies to centrifugal pumps without priming devices for fire-fighting use designed as floating pumps (FPN-F), submersible pumps (FPN-S) or boosted p
27、umps (FPN-B). Fire-fighting centrifugal pumps without primer are defined as terminated by their inlet and outlet connections as well as by their shaft ends. This document applies for fire-fighting centrifugal pumps without priming devices for use under ambient temperatures between -15 C and 40 C. NO
28、TE 1 For special conditions, -30 C; see 6.11. This document does not apply to fire-fighting centrifugal pumps without primer of which the only power source is directly applied manual effort. This document does not apply to fire-fighting centrifugal pumps without primer, intended to be used as interc
29、hangeable equipment (i.e. combined by the user with another machine or vehicle acting as a driver). This document does not apply to fire-fighting centrifugal pumps without primer with a nominal delivery pressure pNabove 15 bar. NOTE 2 High pressure pumps with primer are dealt with in EN 1028-1 and E
30、N 1028-2. #This document specifies the classification and general requirements for fire-fighting centrifugal pumps without priming devices with a nominal delivery rate of up to 10 000 l/min.$ This document deals with significant hazards listed in Clause 4, hazardous situations and events during the
31、commissioning, operation and maintenance of fire-fighting centrifugal pumps without priming devices, used as intended and under the conditions foreseen by the manufacturer. This document does not deal with the detailed verification of general and safety requirements and/or protective measures. These
32、 are covered in EN 14710-2 “Verification of general and safety requirements“. This document does not deal with noise. This document does not deal with the technical safety requirements for the design or manufacture of drivers or of additional equipment intended to be fitted to inlet and outlet conne
33、ctions. It does not cover risks directly arising from means provided for the portability, transportability, and mobility of pump units during or between periods of operation, or requirements for power transmission devices. In addition, this document does not cover: hazards occurring due to decommiss
34、ioning; hazards during use due to a specific environment (e.g. traffic during use on public roads, potentially explosive atmospheres). This document does not apply to fire-fighting centrifugal pumps without primer that are manufactured before the date of publication by CEN of this document. BS EN 14
35、710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 6 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any
36、 amendments) applies. #deleted text$ EN 349, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 547-2, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings EN 547-3, Safety of machinery Human body mea
37、surements Part 3: Anthropometric data #deleted text$ EN 842, Safety of machinery Visual danger signals General requirements, design and testing EN 894-1, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions wit
38、h displays and control actuators EN 894-2, Safety of machinery Ergonomics requirements for the design of displays and control actuators - Part 2: Displays EN 894-3, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 953, Safety o
39、f machinery Guards General requirements for the design and construction of fixed and movable guards#deleted text$ #deleted text$ EN 14710-2:2005, Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 2: Verification of general and safety requirements #EN 60204-1:2006, Safety of mac
40、hinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) $ EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 61310-1, #Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tacti
41、le signals (IEC 61310-1:2007)$ EN 61310-2, #Safety of machinery Indication, marking and actuation Part 2: Requirements for marking (IEC 61310-2:2007)$ EN 62079, Preparation of instructions Structuring, content and presentation (IEC 62079:2001) EN ISO 5199, Technical specifications for centrifugal pu
42、mps Class II (ISO 5199:2002) EN ISO 9905, Technical specifications for centrifugal pumps Class I (ISO 9905:1994) EN ISO 9908, Technical specifications for centrifugal pumps Class III (ISO 9908:1993) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic
43、terminology, methodology (ISO 12100-1:2003) BS EN 14710-1:2005+A2:2008EN 14710-1:2005+A2:2008 (E) 7 EN ISO 12100-2, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) #EN ISO 13732-1, Ergonomics of the thermal environment Methods for the
44、 assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) $ #EN ISO 13857, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) $ #EN ISO 14121-1, Safety of machinery Risk assessment Part 1: Princip
45、les (ISO 14121-1:2007) $. ISO 7010, Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply. 3.1 Pumps and their applic
46、ations 3.1.1 fire-fighting centrifugal pump FP mechanically or hydraulically driven fluid flow machine intended for delivery of fluids for fire-fighting purposes NOTE 1 Adapted from EN 1028-1. NOTE 2 Fire-fighting centrifugal pumps without primer are specially designed for use by fire brigades and c
47、an be suitable for installation in fire-fighting vehicles as specified in EN 1846-1 and motor pumps. NOTE 3 Fire-fighting centrifugal pumps without primer generally consist of: pump unit; connections for inlet ports; shut off devices and connections for outlet ports; connections between pump, shut o
48、ff devices and connection couplings; sieves and dirt traps; measuring instruments; safety devices (if provided); additional equipment. 3.1.2 vehicle mounted pump pump permanently installed on a vehicle and driven by the motive power of the vehicle EN 1028-1:2002 BS EN 14710-1:2005+A2:2008EN 14710-1:
49、2005+A2:2008 (E) 8 3.1.3 motor pump pump complete with a drive motor EN 1028-1:2002 3.1.3.1 portable pump hand transportable motor pump not permanently mounted on a fire-fighting vehicle #NOTE Portable pumps are standardized in EN 14466.$ EN 1028-1:2002 3.1.3.2 trailer pump motor pump mounted on a wheeled chassis that can be towed by a vehicle EN 1028-1:2002 3.1.3.3 skid-mounted pump motor pump mounted on a
