1、BRITISH STANDARDBS EN 15008:2006Aerosol containers Aluminium containers Dimensions of one-piece cans with 25,4 mm apertureThe European Standard EN 15008:2006 has the status of a British StandardICS 55.130g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g
2、3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15008:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978 0 580 50122 7National forewordThis Britis
3、h Standard was published by BSI. It is the UK implementation of EN 15008:2006. The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging.A list of organizations represented on PKW/0 can be obtained on request to its secretary.This publication does not purport to i
4、nclude all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15008Octobe
5、r 2006ICS 55.130English VersionAerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm apertureRcipients pour arosols - Rcipients en aluminium -Dimensions des botiers monobloc (une pice) avecouverture de 25,4 mmAerosolpackungen - Aluminiumbehlter - Mae voneinteiligen Be
6、hltern mit einer ffnung von 25,4 mmThis European Standard was approved by CEN on 6 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-dat
7、e lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the res
8、ponsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Irelan
9、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-
10、1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15008:2006: EEN 15008:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Requirements.4 4.1 Classification of containe
11、rs4 4.2 Filling volumes.5 Bibliography 10 EN 15008:2006 (E) 3 Foreword This document (EN 15008:2006) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publicat
12、ion of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. This draft European Standard is one of a series of thirteen related standards with the following titles: EN 14847, Aerosol containers Tinplate c
13、ontainers Dimensions of the 25,4 mm aperture EN 14848, Aerosol containers Metal containers with 25,4 mm aperture Dimensions of valve cups EN 14849, Aerosol containers Glass containers Dimensions of aerosol valve ferrules EN 14850, Aerosol containers Metal containers with 25,4 mm aperture Measurement
14、 of contact height EN 14851, Aerosol containers Aerosol foam flammability test EN 14852, Aerosol containers Determination of the ignition distance of the spray jet EN 14853, Aerosol containers Enclosed space ignition test EN 14854, Aerosol containers Glass containers Dimensions of the neck finish EN
15、 15006, Metal aerosol containers Aluminium containers Dimensions of the 25,4 mm aperture EN 15007, Metal aerosol containers Tinplate containers Dimensions of two and three-piece cans EN 15008, Aerosol containers Aluminium containers Dimensions of one-piece cans with 25,4 mm aperture EN 15009, Aeroso
16、l containers Compartmented aerosol containers EN 15010, Aerosol containers Aluminium containers Tolerances of the fundamental dimensions in connection with the clinch According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imple
17、ment this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
18、 Kingdom. EN 15008:2006 (E) 4 1 Scope This European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture in relation to the capacities fixed by European Directive 80/232/EEC 2. This standard applies to one-piece containers of monobloc const
19、ruction with an ogival, spherical or flat shoulder. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including
20、 any amendments) applies. EN 15010, Aerosol containers Aluminium containers Tolerances of the fundamental dimensions in connection with the clinch 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 monobloc construction construction without seam
21、ing, welding or soldering 3.2 brimful capacity capacity, in millilitres, of an aerosol container without an aerosol valve 4 Requirements 4.1 Classification of containers One-piece aluminium aerosol containers shall be classified according to five characteristic dimensions: a) brimful capacity (C2);
22、b) nominal outside diameter (De) which, when measured in accordance with EN 15010, shall have a tolerance of 0,3 mm; c) cover seat height (H2), which shall be as shown in Figure 1 and which shall have a tolerance of 0,5 mm measured at (De 2) mm; d) nominal overall height (H3), which shall be as show
23、n in Figure 1 and which shall have a tolerance of 0,4 mm; e) shoulder, which shall be either ogival, spherical or flat as shown in Figure 1. EN 15008:2006 (E) 5 4.2 Filling volumes The filling volumes of aerosol containers with ogival shoulders shall be as shown in Table 1. The filling volumes of ae
24、rosol containers with spherical shoulders shall be as shown in Table 2. The filling volumes of aerosol containers with flat shoulders shall be as shown in Table 3. H2H3DeDe-225,4RH2H3DeDe-225,4R = 1/2DeH2H3DeDe-225,4RABCKey A Ogival shoulder B Spherical shoulder C Flat shoulder Figure 1 Dimensions a
25、nd shoulder profiles EN 15008:2006 (E) 6 Table 1 Containers with ogival shoulder Brimful capacityaNominal filling volumebNominal Nominal Cover seat C2V outside overall seat ml ml diameter height height nom. min. max. liquefied gasccompressed gasdDe mm H3 mm H2 mm 47 45 49 - 25 35 59 7,7 75 72 78 50
26、- 35 88 7,7 89 85 93 - 50 35 105 7,7 38 90 11,0 110 106 114 75 - 35 125 7,7 38 110 11,0 40 100 12,0 140 134 146 100 75 35 156 7,7 38 138 11,0 40 125 12,0 42 115 12,5 45 105 15,0 175 169 181 125 100 38 168 11,0 40 156 12,0 42 142 12,5 45 125 15,0 210 204 216 150 125 40 183 12,0 42 165 12,5 45 150 15,
27、0 47 137 16,5 50 125 18,5 270 262 278 200 150 45 190 15,0 47 176 16,5 50 156 18,5 53 142 20,5 335 325 345 250 200 47 214 16,5 50 190 18,5 53 173 20,5 55 162 22,0 59 142 24,5 “to be continued“EN 15008:2006 (E) 7 Table 1 (continued) Brimful capacityaNominal filling volumebNominal Nominal Cover seat C2
28、V outside overall seat ml ml diameter height height nom. min. max. liquefied gasccompressed gasdDe mm H3 mm H2 mm 405 393 417 300 250 47 254 16,5 50 225 18,5 53 205 20,5 55 191 22,0 57 180 23,5 59 169 24,5 64 150 28,5 66 143 29,0 520 507 533 400 300 53 260 20,5 55 242 22,0 57 226 23,5 59 214 24,5 64
29、 185 28,5 66 178 29,0 650 637 663 500 400 57 277 23,5 59 265 24,5 64 230 28,5 66 218 29,0 800 784 816 600 500 66 263 29,0 74 210 34,5 1000 980 1020 750 600 66 322 29,0 74 263 34,5 aThe minimum and maximum values have been calculated in accordance with EN ISO 90-3 1. bAccording to EEC Council Directi
30、ve of 15 January 1980, nr, 80/232/EEC 2, Annex III and EEC Council Directive of 18 March 1986, nr, 86/96/EEC 3, Annex, item 2. cProducts propelled by liquefied gas. dProducts propelled by compressed gases alone and products propelled by nitrous oxide or carbon dioxide alone or by mixtures of the two
31、 alone when the product has a Bunsen coefficient of 1,2 or less. EN 15008:2006 (E) 8 Table 2 Containers with spherical shoulder Brimful capacityaFilling volumebNominal Nominal Cover seat C2V outside overall seat ml ml diameter height height liquefied compressed DeH3H2nom. min. max. gascgasdmm mm mm
32、47 45 49 - 25 35 59 7,0 75 72 78 50 - 35 88 7,0 89 85 93 - 50 35 105 7,0 110 106 114 75 - 35 125 7,0 40 100 11,0 140 134 146 100 75 35 156 7,0 40 125 11,0 45 105 14,0 175 169 181 125 100 40 156 11,0 45 125 14,0 210 204 216 150 125 40 183 11,0 45 150 14,0 47 137 14,5 50 125 16,0 270 262 278 200 150 4
33、5 190 14,0 47 176 14,5 50 156 16,0 53 142 18,0 335 325 345 250 200 47 214 14,5 50 190 16,0 53 173 18,0 59 142 21,6 405 393 417 300 250 47 254 14,5 50 225 16,0 53 205 18,0 59 169 21,6 64 150 23,5 520 507 533 400 300 53 260 18,0 59 214 21,6 64 185 23,5 650 637 663 500 400 59 265 21,6 64 230 23,5 a The
34、 minimum and maximum values have been calculated in accordance with EN ISO 90-3 1. b According to EEC Council Directive of 15 January 1980, nr, 80/232/EEC 2, Annex III and EEC Council Directive of 18March 1986, nr, 86/96/EEC 3, Annex, item 2. c Products propelled by liquefied gas. d Products propell
35、ed by compressed gases alone and products propelled by nitrous oxide or carbon dioxide alone or by mixtures of the two alone when the product has a Bunsen coefficient of 1,2 or less. EN 15008:2006 (E) 9 Table 3 Containers with flat shoulder Brimful capacityaFilling volumebNominal Nominal Cover seat
36、C2V outside overall seat ml ml diameter height height liquefied compressed DeH3H2nom. min. max. gascgasdmm mm mm 140 134 146 100 75 45 100 7 175 169 181 125 100 45 123 7 210 204 216 150 125 45 146 7 50 121 9,4 53 110 9,6 270 262 278 200 150 50 152 9,4 53 139 9,6 335 325 345 250 200 50 186 9,4 53 170
37、 9,6 405 393 417 300 250 53 202 9,6 59 168 11,4 520 507 533 400 300 59 211 11,4 66 173 13,5 650 637 663 500 400 59 260 11,4 66 210 13,5 800 784 816 600 500 66 257 13,5 a The minimum and maximum values have been calculated in accordance with EN ISO 90-3 1. b According to EEC Council Directive of 15 J
38、anuary 1980, nr, 80/232/EEC 2, Annex III and EEC Council Directive of 18March 1986, nr, 86/96/EEC 3, Annex, item 2. c Products propelled by liquefied gas. d Products propelled by compressed gases alone and products propelled by nitrous oxide or carbon dioxide alone or by mixtures of the two alone wh
39、en the product has a Bunsen coefficient of 1,2 or less. EN 15008:2006 (E) 10 Bibliography 1 EN ISO 90-3, Light gauge metal containers Definitions and determination of dimensions and capacities Part 3: Aerosol cans. (ISO 90-3:2000) 2 EUROPEAN COMMUNITIES. Council Directive 80/232/EEC of 15 January 19
40、80 on the approximation of the laws of the Member States relating to the ranges of nominal quantities and nominal capacities permitted for certain prepackaged products. Luxembourg: EUR-OP (Office for Publications of the European Communities). 3 EUROPEAN COMMUNITIES. Council Directive 86/96/EEC of 18
41、 March 1986 amending Directive 80/232/EEC on the approximation of the laws of the Member States relating to the ranges of nominal quantities and nominal capacities permitted for certain prepackaged products. Luxembourg: EUR-OP (Office for Publications of the European Communities). blankBS EN 15008:2
42、006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are
43、 updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Bri
44、tish Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically
45、 receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/w
46、ww.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international sta
47、ndards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing
48、members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regard
49、ing online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright,