1、BRITISH STANDARDBS EN 15014:2007Plastics piping systems Buried and above ground systems for water and other fluids under pressure Performance characteristics for pipes, fittings and their jointsICS 23.040.20; 23.040.45g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g5
2、4g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15014:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2008 BSI 2008ISBN 978 0 580 54579 5National forewor
3、dThis British Standard was published by BSI. It is the UK implementation of EN 15014:2007. The UK participation in its preparation was entrusted by Technical Committee PRI/88, Plastics piping systems, to Subcommittee PRI/88/2, Plastic piping for pressure applications. This British Standard is intend
4、ed as a means of demonstrating compliance with the Construction Products Directive (89/106/EEC), and affixing the CE mark. The Essential Requirements contained in this British Standard are concepts related to the Construction Products Directive and they are not necessarily indicative of all the perf
5、ormance requirements or suitability for the service conditions likely to be encountered in a particular pipework application. The CE mark indicates only that a product may legally be placed on the market in the EU. It does not indicate or guarantee inherent quality of the CE marked pipework componen
6、ts. It should be noted that manufacturers are entitled to declare “No Performance Determined” against some or all of these Essential Requirements and yet still affix the CE mark to their products. Users are advised to check the background details with the manufacturers claims for the CE marked produ
7、cts. Such details may be available on an appropriate Internet website or accompanying Company documentation. Compliance with this British Standard does not necessarily mean that products bearing the CE mark are fit for a particular intended purpose. This Standard does not replace the corresponding B
8、S EN Product Standards (see national annex NA) which do contain detailed performance requirements for pipes, fittings and joints manufactured from particular plastics materials. Amendments issued since publicationAmd. No. Date CommentsBS EN 15014:2007iThis British Standard makes no reference to the
9、suitability of pipework for conveying drinking water. The legislation setting out these requirements for water supply installations in the UK is: for installations for public water supplies: the Water Supply (Water Quality) Regulations 2000, Regulation 31 (England), the Water Supply (Water Quality)
10、Regulations 2001, Regulation 31 (Wales), the Water Supply (Water Quality) Regulations 2001, Regulation 27 (Scotland); and the Water Supply (Water Quality) Regulations 2007, Regulation 30 (Northern Ireland); and for installations for consumers premises: the Water Supply (Water Fittings) Regulations 1
11、999 (England and Wales), the Water Byelaws 2000 (Scotland) and the current requirements for Northern Ireland A list of product standards used in conjunction with this standard is included in a national annex NA. A list of organizations represented on PRI/88/2 can be obtained on request to its secret
12、ary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations blankEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15014October 2007IC
13、S 23.040.20; 23.040.45English VersionPlastics piping systems - Buried and above ground systems forwater and other fluids under pressure - Performancecharacteristics for pipes, fittings and their jointsSystmes de canalisations en plastique - Systmesenterrs et ariens pour eau et autres fluides avec pr
14、ession- Caractristiques de performance pour tubes, raccords etleurs assemblagesKunststoff-Rohrleitungssysteme - Erd- und oberirdischverlegte Druckrohrleitungssysteme fr Wasser und andereFlssigkeiten - Eigenschaften fr die Gebrauchstauglichkeitvon Rohren, Formstcken und deren VerbindungenThis Europea
15、n Standard was approved by CEN on 23 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern
16、ing such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own lan
17、guage and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
18、embourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All right
19、s of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15014:2007: EEN 15014:2007 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Terms, definitions and symbols 7 4 Performance requirements. 7 4.1 Reaction to fire fo
20、r applications inside building7 4.2 External pressure strength. 7 4.3 Internal pressure strength 7 4.4 Dimensional tolerances 8 4.5 Tightness (air and liquid) 8 4.6 Durability 8 4.7 Dangerous substances. 8 5 Test methods . 9 5.1 Reaction to fire for applications inside building9 5.2 Determination of
21、 the nominal pressure 9 5.3 Internal pressure strength 9 5.4 Dimensional tolerances 10 5.5 Tightness 10 5.6 Durability 10 6 Evaluation of conformity 10 6.1 General . 10 6.2 Initial type testing 11 6.3 Factory production control 12 6.4 One-off products and products produced in very low quantities 15
22、Annex A (normative) Product standards for buried and above-ground pressure piping systems in plastics materials for water for general purposes, drainage, sewerage, irrigation and other fluids. 17 Annex B (normative) Standards for assessment of conformity for buried and above-ground pressure piping s
23、ystems in plastics materials for water for general purposes, drainage, sewerage, irrigation and other fluids 19 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive. 20 ZA.1 Scope and relevant characteristics. 20 ZA.2 Procedure for
24、attestation of conformity of plastics pipes and fittings 21 ZA.2.1 Systems of attestation of conformity 21 ZA.2.2 EC Certificate and Declaration of conformity. 23 ZA.3 CE marking and labelling . 25 ZA.3.1 CE marking requirements. 25 ZA.3.2 Simplified CE marking with reference to a web site 26 ZA.3.2
25、.1 General . 26 ZA.3.2.2 Minimum rules for the proper use of a web site for CE marking information 28 Bibliography 29 BS EN 15014:2007EN 15014:2007 (E) 3 Foreword This document (EN 15014:2007) has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems”, the secr
26、etariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by July 2009. This document has bee
27、n prepared under the mandate M/131 “Pipes, tanks and ancillaries not in contact with water intended for human consumption“ given to CEN by the European Commission and the European Free Trade Association and support essential requirements of EU Directives. For the relationship with EU Directives, see
28、 informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, F
29、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15014:2007EN 15014:2007 (E) 4 Introduction This European Standard contains
30、 only the performance characteristics needed to meet the essential requirements of EU Directive(s). It does not cover all characteristics of the products. These are specified in the standards listed in Annex A or in other appropriate product specifications. This harmonised European Standard is part
31、of a family of cluster standards addressing plastics piping systems. The relationship is shown below. Material independent Specific solutions For the harmonisation of pressure plastics piping systems (this European Standard) the following applies: For pipes and fittings For valves Figure 1 BS EN 150
32、14:2007EN 15014:2007 (E) 5 1 Scope This European Standard specifies performance requirements for plastics pipes, fittings and their joints for buried or above-ground pressure applications for water for general purposes, drainage, sewerage and irrigation, as well as for any other pressure application
33、 with other fluids covered by the Construction Products Directive with the exception of drinking water distribution for human consumption. It gives associated test methods for verification and evaluation of conformity with this European Standard. NOTE Compliance of pipes, fittings and their joints w
34、ith this document does not confer a presumption of fitness of the product for the transport of water intended for human consumption within the meaning of the Directive 89/106/EEC. However, until the operation of the envisaged European Acceptance Scheme for construction products in contact with water
35、 intended for human consumption and the revision of this standard, products conforming to this standard could be used for the transport of water intended for human consumption if they conform to the relevant national, regional or local regulatory provisions or recommendations applicable in the place
36、 of use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 681-1, Elastom
37、eric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber EN 681-2, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomers EN 681-4, Elastomeric seals Materi
38、als requirements for pipe joint seals used in water and drainage applications Part 4: Cast polyurethane sealing elements EN 713, Plastics piping systems Mechanical joints between fittings and polyolefin pressure pipes Test method for leaktightness under internal pressure of assemblies subjected to b
39、ending EN 715, Thermoplastics piping systems End-load bearing joints between small diameter pressure pipes and fittings Test method for leaktightness under internal water pressure, including end thrust EN 911, Plastics piping systems Elastomeric sealing ring type joints and mechanical joints for the
40、rmoplastics pressure piping Test method for leaktightness under external hydrostatic pressure EN 1394, Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Determination of the apparent initial circumferential tensile strength EN 1796, Plastics piping systems for water supply
41、with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 14364, Plastics piping systems for dra
42、inage and sewerage with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Specifications for pipes, fittings and joints EN 15012:2007, Plastics piping systems Soil and waste discharge systems within the building structure Performance characte
43、ristics for pipes, fittings and their joints BS EN 15014:2007EN 15014:2007 (E) 6 EN ISO 1167-1, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method (ISO 1167-1:2006) EN ISO 1167-2, Thermoplastics pipes
44、, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) prEN ISO 1167-3:2005, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to in
45、ternal pressure Part 3: Preparation of components (ISO/DIS 1167-3:2005) prEN ISO 1167-4:2006, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies (ISO/DIS 1167-4:2006) EN ISO 3126, Plastics
46、piping systems Plastics components Determination of dimensions (ISO 3126:2005) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) EN ISO 9080, Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by ex
47、trapolation (ISO 9080:2003) EN ISO 12162, Thermoplastics materials for pipes and fittings for pressure applications Classification and designation Overall service (design) coefficient (ISO 12162:1995) EN ISO 13783, Plastics piping systems Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing d
48、ouble socket joints Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) EN ISO 13846, Plastics piping systems End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping Test method for long-term leaktigh
49、tness under internal water pressure (ISO 13846:2000) ISO 161-1, Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series ISO 17456, Plastics piping systems Multilayer pipes Determination of long-term strength ISO 21004, Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply BS EN 15014:2007EN 15014:2007 (E) 7 3 Terms, definitions and symbols For the purposes of this d
