1、BRITISH STANDARDPower-operated mobile racking and shelving, carousels and storage lifts Safety requirementsICS 53.080g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42
2、g43g55g3g47g36g58BS EN 15095:2007 +A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2007National forewordAmendments/corrigenda issued since publicationBS EN 15095:2007+A1:2008This British Standard is the UK implementation o
3、f EN 15095:2007+A1:2008. It supersedes BS EN 15095:2007, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is in
4、dicated by a b . The UK participation in its preparation was entrusted to Technical Committee MHE/14, Rail dependent storage and retrieval equipmentSafety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include al
5、l the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. BSI 2009 ISBN 978 0 580 61485 9Date Comments Implementation of CEN amendment A1:200831 May 2009EUROPEAN STANDARD NORME EUROPEN
6、NE EUROPISCHE NORM EN 15095:2007+A1 December 2008 ICS 53.080 Supersedes EN 15095:2007 English Version Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements lvateurs de stockage, carrousels et rayonnages palette et tablette, mobiles et motoriss - Prescriptions
7、de scurit Kraftbetriebene verschiebbare Paletten- und Fachbodenregale, Umlaufregale und Lagerlifte - Sicherheitsanforderungen This European Standard was approved by CEN on 23 September 2007 and includes Amendment 1 approved by CEN on 9 November 2008. CEN members are bound to comply with the CEN/CENE
8、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any
9、 CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
10、CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
11、Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Mem
12、bers. Ref. No. EN 15095:2007+A1:2008: EEN 15095:2007+A1:2008 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Significant hazards 9 4.1 Mechanical hazards .9 4.2 Electrical power hazards 10 4.3 Hazards through ignoring ergonomic principle
13、s in machine design 10 4.4 Hazards caused through failure of power supply, failure of machine parts or other functional faults 10 4.5 Hazards arising from inappropriate design or failure of safety systems . 10 4.6 Hazards caused through electromagnetic influences 10 4.7 List of significant hazards .
14、 11 5 Safety requirements and protective measures 14 5.1 General requirements . 14 5.2 Mechanical hazards 14 5.3 Electrical hazards . 21 5.4 Ergonomics . 22 5.5 Power supply faults, machine parts failing or other malfunctions . 23 6 Verification of the safety requirements and/or protective measures
15、24 6.1 Conformity of safety measures to safety requirements . 24 6.2 Design/Manufacturing phase . 26 6.3 At the installation site, before power is switched on 26 6.4 Commissioning . 27 7 Information for the user . 27 7.1 Instruction handbook . 27 7.2 Marking 29 Annex A (informative) Types of power-o
16、perated storage equipment . 31 Annex B (informative) Power-operated mobile storage systems 34 Annex C (informative) Rail tolerances for mobile racking . 36 Annex D (normative) Rack and pinion . 39 D.1 Pinion . 39 D.2 Rack(s) . 39 D.3 Rack/pinion(s) engagement . 39 Annex E (informative) Chains in ver
17、tical carousels 41 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 42 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 43 Bibliography . 44 BS EN
18、 15095:2007+A1:2008EN 15095:2007+A1:2008 (E) 3 Figures Figure A.1 Storage equipment with vertically circulating carriers (vertical carousels) . 31 Figure A.2 Storage equipment with horizontally circulating carriers (horizontal carousels) 31 Figure A.3 Storage lift 32 Figure A.4 Mobile shelving. 32 F
19、igure A.5 Mobile racking 33 Figure B.1 Clearances to building parts (see 5.2.4.2) . 34 Figure B.2 Protective devices and edge clearance according to 5.2.4.3 34 Figure B.3 Example of a cable barrier . 35 Figure B.4 Example of local protection on mobile racking according to 5.2.4.7 35 Figure C.1 Twist
20、 of the rail 36 Figure C.2 Maximum absolute vertical tolerances . 36 Figure C.3 Maximum relative vertical tolerance. 37 Figure C.4 Maximum inclination of the rails . 37 Figure C.5 Straightness of the rails . 37 Figure C.6 Uneven floor . 38 Figure D.1 Rack / pinion(s) engagement . 40 Figure E.1 Third
21、 deep system 41 Figure E.2 Horizontal system . 41 Tables Table 1 List of significant hazards . 12 Table 2 25 BS EN 15095:2007+A1:2008EN 15095:2007+A1:2008 (E) 4 Foreword This document (EN 15095:2007+A1:2008) has been prepared by Technical Committee CEN/TC 149 “Power-operated warehouse equipment”, th
22、e secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This documen
23、t supersedes EN 15095:2007. This document includes Amendment 1, approved by CEN on 2008-11-09. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European
24、 Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the follo
25、wing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov
26、enia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15095:2007+A1:2008EN 15095:2007+A1:2008 (E) 5 Introduction This standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are i
27、ndicated in the scope of this standard. For machines designed and built according to the specifications of this Type C Standard the following applies: “When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard t
28、ake precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type C standard.“ When this standard was prepared it was assumed that: only trained staff would operate, repair or maintain the machine; components without spe
29、cial requirements are 1) sized in accordance with good engineering practice and methods of calculation including all types of failure; 2) correctly constructed mechanically and electrically; 3) made of materials of adequate loading capacity and of suitable quality; 4) made of materials that are fit
30、for that purpose. components are kept in a good repair and operating condition so that the required characteristics can be maintained in spite of wear and tear; sizing of load bearing parts ensures safe operation of the machine in a loading range from 0 % to 100 % of the nominal capacity and during
31、testing conditions if applicable; details of particular conditions of use and the installation site are agreed between user and manufacturer; working area is adequately illuminated; installation site permits safe operation of the machine. BS EN 15095:2007+A1:2008EN 15095:2007+A1:2008 (E) 6 1 Scope 1
32、.1 This European Standard deals with the safety requirements for the following types of power-operated storage equipment: storage carousels; storage lifts; mobile shelving, pallet racking and cantilever racking with the objective of eliminating or minimising the hazards described in Clause 4. These
33、hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment. 1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is esse
34、ntial that additional hazard analysis and safety measures be taken into account, e. g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could gener
35、ate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food. 1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A. 1.4 With regard to buildings and parts of buildings, thi
36、s standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out. 1.5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard. 1.
37、6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts. They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators). 1.7 Th
38、is standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2. 2 Normative references The following referenced documents are indispensable for the application of this document. For
39、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ EN 1760-1, Safety of ma
40、chinery Pressure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitiv
41、e edges and pressure sensitive bars EN 12369-1, Wood-based panels Characteristic values for structural design Part 1: OSB, particleboards and fibreboards BS EN 15095:2007+A1:2008EN 15095:2007+A1:2008 (E) 7 EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirem
42、ents (IEC 60204-1:2005, modified) EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN 60950-1:2006, Information technology equipment Safety Part 1: General requirements (IEC 60950-1:2005, modified) EN 61496-1, Safety of machiner
43、y Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic
44、 concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850, Safety of machinery Emergency stop Principles for design (ISO 13
45、850:2006) !EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)“ ISO 6336-1, Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors ISO 6336-2, Calc
46、ulation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) ISO 6336-3, Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength ISO 6336-5, Calculation of load capacity of spur and helical gears Part 5: Strength
47、and quality of materials ISO 6336-6, Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load ISO 10823, Guidelines for the selection of roller chain drives 3 Terms and definitions For the purposes of this document, the terms and definitions give
48、n in EN ISO 12100-1:2003 and the following apply. 3.1 carousels horizontal and/or vertical circulating storage equipment with load carriers (freely suspended carriers, suspended rods or others) NOTE They can be provided with one or more access openings (see Figure A.1 and Figure A.2) BS EN 15095:200
49、7+A1:2008EN 15095:2007+A1:2008 (E) 8 3.2 storage lifts designed to take goods placed on load carriers (e. g. storage containers). The in-built lift unit carries the load carriers (e.g. storage containers) from an access opening to storage locations in a racking tower, or from a storage location to an access opening. Storage lifts can have one or more access openings on one or more levels (see Figure A.3) 3.3 mobile shelving mobile shelving comprises a series
