1、BS EN 15258:2008ICS 91.100.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPrecast concreteproducts Retainingwall elementsThis British Standardwas published underthe authority of theStandards Policy andStrategy Committee on 30September 2009 BSI 2009ISBN 978 0
2、580 55480 3Amendments/corrigenda issued since publicationDate CommentsBS EN 15258:2008National forewordThis British Standard is the UK implementation of EN 15258:2008.The UK participation in its preparation was entrusted to TechnicalCommittee B/524, Precast concrete products.A list of organizations
3、represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 152
4、58:2008EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15258October 2008ICS 91.100.30English VersionPrecast concrete products - Retaining wall elementsProduits prfabriqus en bton - lments de murs desoutnementBetonfertigteile - SttzwandelementeThis European Standard was approved by CEN on 25 July 2
5、008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on
6、 application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Cent
7、re has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
8、Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any mean
9、s reservedworldwide for CEN national Members.Ref. No. EN 15258:2008: EBS EN 15258:2008EN 15258:2008 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004, Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369:2004 is no
10、t relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword4 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and definitions .8 4 Requirements.8 4.1 Material requirements .8 4.2 Production requirements 8 4.
11、2.1 Concrete production .8 4.2.2 Hardened concrete 8 4.2.3 Structural reinforcement.8 4.3 Finished product requirements9 4.3.1 Geometrical properties .9 4.3.2 Surface characteristics .9 4.3.3 Mechanical resistance.9 4.3.5 Acoustic properties .9 4.3.6 Thermal properties 10 4.3.7 Durability 10 4.3.8 O
12、ther requirements10 5 Test methods10 5.1 Tests on concrete 10 5.2 Measuring of dimensions and surface characteristics .10 5.2.1 General10 5.2.2 Position of reinforcement .10 5.2.3 Wall element dimensions11 5.3 Weight of the products11 5.4 Load test of elements11 6 Evaluation of conformity.11 7 Marki
13、ng .11 8 Technical documentation .11 Annex A (normative) Inspection schemes12 A.1 General12 A.2 Process inspection12 A.3 Finished product inspection.12 Annex B (informative) Examples of retaining wall elements 14 Annex C (informative) Mechanical resistance test of the restraint (stem-base) of precas
14、t elements for retaining cantilever walls 19 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive21 ZA.1 Scope and relevant characteristics .21 ZA.2 Procedure for attestation of conformity of retaining wall elements.22 ZA.2.1 Sy
15、stem of attestation of conformity 22 ZA.2.2 EC Certificate and Declaration of conformity.24 BS EN 15258:2008EN 15258:2008 (E) 3 ZA.3 CE marking and labelling25 ZA.3.1 General .25 ZA.3.2 Declaration of geometrical data and material properties (method 1) 26 ZA.3.3 Declaration of product properties (me
16、thod 2)28 ZA.3.4 Declaration of compliance with a given design specification provided by the client (method 3a) 29 ZA.3.5 Declaration of compliance with a given design specification provided by the manufacturer according to the clients order (method 3b).30 BS EN 15258:2008EN 15258:2008 (E) 4 Forewor
17、d This document (EN 15258:2008) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR, and was examined by and agreed with a joint working party appointed by the Liaison Group CEN/TC 229-CEN/TC 250, particularly for its compatibili
18、ty with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to th
19、e possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free
20、Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects reference is
21、 made to EN 13369:2004: Common rules for precast products, from which also the relevant requirements of the EN 206-1: Concrete Part 1: Specification, performances, production and conformity are taken. The references to EN 13369:2004 by CEN/TC 229 product standards are intended to make them homogeneo
22、us and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design aspects. The installation of some structural precast concrete products is dealt with by ENV 13670-1, Execution of concrete structures Part 1: Common rules, which has at the moment the status of
23、an European prestandard. In all countries it can be accompanied by alternatives for national application and it shall not be treated as a European standard. The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting on several part
24、s: EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation piles EN 12843, Precast concrete products Masts and poles EN 13224, Precast concrete products Ribbed floor elements EN 13225, Precast concrete products Linear structural elements EN 13693, Precast
25、concrete products Special roof elements EN 13747, Precast concrete products Floor plates for floor systems EN 13978-1, Precast concrete products Precast concrete garages Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions EN 14843, Precast con
26、crete products Stairs BS EN 15258:2008EN 15258:2008 (E) 5 EN 14844, Precast concrete products Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast concrete products Wall elements EN 15037-1, Precast concrete products Beam-and-block floor systems Part 1: Beams prEN 1
27、5037-2, Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks prEN 15037-3, Precast concrete products Beam-and-block floor systems Part 3: Clay blocks prEN 15037-4, Precast concrete products Beam-and-block floor systems Part 4: Polystyrene blocks prEN 15037-5, Precast concre
28、te products Beam-and-block floor systems Part 5: Lightweight blocks EN 15050, Precast concrete products Bridge elements EN 15258, Precast concrete products Retaining wall elements This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Euroc
29、odes (EN 1992-1-1:2004 and EN 1992-1-2:2004). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical strength, the conditions to affix CE marking to the product are described in ZA.3.4 and Z.A 3.5.
30、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
31、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15258:2008EN 15258:2008 (E) 6 Introduction The evaluation of conformity given in this standard refers to the precast elements which are s
32、upplied to the market and covers all the production operations carried out in the factory. For design rules reference is made to EN 1992-1-1:2004. Additional complementary rules are provided where necessary. BS EN 15258:2008EN 15258:2008 (E) 7 1 Scope This European Standard deals with the requiremen
33、ts, the basic performance criteria and evaluation of conformity for precast elements made of plain, reinforced or prestressed normal weight concrete, used for the construction of retaining walls. The products covered by this European Standard are intended to be used as part of retaining walls in app
34、lications such as: to retain natural ground excavations and trenches; to retain earth fills for roads, platforms, etc.; in bridge abutments and their flank walls; to retain several kinds of loose materials such as sand, gravel, etc. Some examples of precast elements considered in this European Stand
35、ard are shown in the Informative Annex B. The products may be used in seismic areas on condition that they fulfil the requirements specific to this use. This European Standard does not cover: products for retaining walls of tanks or reservoirs of liquids; retaining wall elements up to a height of 1,
36、0 m and those assembled to form retaining walls of up to 1,0 m in height (e.g. stacked flower boxes for dwarf walls) if the corresponding retaining wall is used for secondary loads (max. horizontal earth fill and with light surcharge); products for stacked planting boxes, having only faade functions
37、, and therefore not submitted to any loads (such as earth pressure loads, highway load effects, etc.); precast diaphragm walls (concrete sheet piling). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
38、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1990:2002, Eurocode Basis of structural design EN 1992-1-1, Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 13369:2004, Common
39、 rules for precast concrete products EN ISO 12572, Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) BS EN 15258:2008EN 15258:2008 (E) 8 3 Terms and definitions For the purposes of this document, the terms and definitio
40、ns given in EN 13369:2004 and the following apply. 3.1 cantilever wall wall whose stability is obtained by its flexural and shear resistance connected to act compositely with a foundation slab 3.2 gravity resistant wall wall whose stability is obtained by the weight of its elements 3.3 reinforced so
41、il wall wall whose stability is obtained by means of reinforcing strips placed in layers inside the fill and anchored to precast concrete plates forming the facing that retains the earth 3.4 tied wall retaining wall which comprises ties connecting the wall with the foundation 4 Requirements 4.1 Mate
42、rial requirements 4.1 of EN 13369:2004 shall apply. 4.2 Production requirements 4.2.1 Concrete production 4.2.1 of EN 13369:2004 shall apply. 4.2.2 Hardened concrete 4.2.2.1 Strength classes 4.2.2.1 of EN 13369:2004 shall apply. 4.2.2.2 Compressive strength 4.2.2.2 of EN 13369:2004 shall apply. In a
43、ddition, the minimum concrete compressive strength at the time of delivery shall be declared. The concrete class shall not be less than C25/30 for retaining wall elements. 4.2.3 Structural reinforcement 4.2.3 of EN 13369:2004 shall apply. BS EN 15258:2008EN 15258:2008 (E) 9 4.3 Finished product requ
44、irements 4.3.1 Geometrical properties 4.3.1 of EN 13369:2004 shall apply. 4.3.2 Surface characteristics 4.3.2 of EN 13369:2004 shall apply. 4.3.3 Mechanical resistance 4.3.3.1 General 4.3.3 of EN 13369:2004 shall apply except 4.3.3.4 which is not relevant. Complementarily to 4.3.3 of EN 13369:2004,
45、4.3.3.2 and 4.3.3.3 shall apply. 4.3.3.2 Verification by calculation aided by physical testing In the case physical testing on finished products is required to aid calculation according to 4.3.3.3 of EN 13369:2004, Annex C describes a method for mechanical resistance test of the restraint (stem-base
46、) on full scale specimens of precast elements for retaining cantilever walls. This test may serve to confirm design assumptions and/or substitute calculations if there are no adequate models for some details (e.g. gusset). 5.2(1), 5.2(2)P and 5.2(3) of EN 1990:2002 shall apply. 4.3.3.6 Transient sit
47、uations The transient situations covered by this sub-clause relate to storage, handling, transport and installation. The strength and properties of the concrete retaining wall element to be considered in transient situations are those specified by the manufacturer at the time of delivery. Main and s
48、econdary transverse reinforcements provided in the wall element, as well as those used for lifting, shall be capable to withstand the loadings expected for the transient situations. In these transient situations temporary props or safe mounting racks, suitable for the product shall be used, if neces
49、sary, to maintain the precast elements in correct position and shape and to reduce the effects of the loadings. 4.3.3.7 Conditions for installation Wall elements shall be installed in accordance with technical specifications provided by the manufacturer. Wall elements shall be erected using temporary props or any device required by technical specifications to achieve their own resistance and their own stability in transitional stage, and safe working condition
