1、Energy performance of buildings - Method for calculation of system energy requirements and system efficienciesPart 4-10: Wind power generation systems, Module M11-8-7BS EN 15316-4-10:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENN
2、E EUROPISCHE NORM EN 15316-4-10 May 2017 ICS 27.180; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7 Performance nergtique des btiments - Mthode de calc
3、ul des besoins nergtiques et des rendements des systmes - Partie 4-10 : Systmes de production dlectricit olienne, Module M11-8-7 Enegetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-10: Windkraftanlagen, Modul M11-8-7 This Europ
4、ean Standard was approved by CEN on 6 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co
5、ncerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
6、into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France
7、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISC
8、HES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15316-4-10:2017 ENational forewordThis British Standard is the UK implementation of EN 153
9、16-4-10:2017.The UK participation in its preparation was entrusted to Technical Committee RHE/24, Heating systems and water based cooling systems in buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to includ
10、e all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 89189 2ICS 27.180; 91.140.10Compliance with a British Standard cannot confer immunity from legal obligations.
11、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 15316410:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15316-4-10 May 2017 ICS 27.1
12、80; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des s
13、ystmes - Partie 4-10 : Systmes de production dlectricit olienne, Module M11-8-7 Enegetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-10: Windkraftanlagen, Modul M11-8-7 This European Standard was approved by CEN on 6 February 20
14、17. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
15、on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CEN
16、ELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ita
17、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cen
18、tre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15316-4-10:2017 EBS EN 15316410:2017EN 15316-4-10:2017 (E) 2 Contents PageEuropean foreword . 3 Introduction 4 1 Scope 5 2 Normative refere
19、nces 7 3 Terms and definitions . 7 4 Symbols and abbreviations . 8 5 Wind power systems (WPS) 8 5.1 Input quantities from other parts of the heating system standards 8 5.2 Output quantities from other parts of the heating system standards . 9 5.3 Monthly mean wind velocity v1in m/s 9 5.4 Determinati
20、on of the WPS and hub height. 9 5.5 Determination of the wind power in the respective month 9 5.6 Determination of the WPS capacity . 10 5.7 Mean monthly operating time t in h/mth 11 5.8 Determination of the monthly yield 11 Annex A (informative) Additional values for parametering the WPS 12 Annex B
21、 (informative) Additional default values for parametering the WPS . 13 Annex C (informative) Calculation example . 14 Bibliography . 16 BS EN 15316410:2017EN 15316-4-10:2017 (E) 3 European foreword This document (EN 15316-4-10:2017) has been prepared by Technical Committee CEN/TC 228 “Heating system
22、s and waterbased cooling systems in buildings”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be
23、withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the nati
24、onal standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit
25、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15316410:2017EN 15316-4-10:2017 (E) 4 Introduction This document forms part of a series of standards aimed at European harmonization
26、 of the methodology for the calculation of the energy performance of buildings. EPB standards deal with energy performance calculation and other related aspects (like system sizing) to provide the building services considered in the EPB directive. CEN/TC 228 deals with heating systems in buildings.
27、Subjects covered by CEN/TC 228 are: energy performance calculation for heating systems; inspection of heating systems; design of heating systems; installation and commissioning of heating systems. This standard gives the procedure to take into account the energy performance of wind power systems (WP
28、S). To provide flexibility to the EU Member States in the application of the set of CEN standards, clearly identified options are given, with a rational for the choices. In order to progress on alignment, reproducibility and transparency default CEN options are provided at relevant positions in the
29、standards. At national level these default CEN options may be replaced by a National Annex, following the models provided in the relevant standards. BS EN 15316410:2017EN 15316-4-10:2017 (E) 5 1 Scope This European Standard defines a method for the assessment of electricity generation onsite or near
30、by the building environment onsite or nearby the building through wind power systems (WPS) and energy performance calculation of wind power systems. The WPS described in this document are small plants as they may occur in domestic production and use of electricity in connection with specific buildin
31、gs. This standard covers wind generation power systems 75 kW. This European Standard does not cover sizing or inspection of WPS. Other generation systems are covered in other sub modules of part M3-8. Table 1 shows the relative position of this standard within the set of EPB standards in the context
32、 of the modular structure as set out in ISO 52000-1. NOTE 1 In ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although on
33、e EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1. BS EN 15316410:2017EN 15316-4-10:2017 (E) 6 Table 1 Position of this standard within the
34、modular structure of the set of EPB standards Overarching Building (as such) Technical Building Systems DescriptionsDescriptionsDescriptionsHeatingCoolingVentilationHumidificationDehumidificationDomesticHot waterLightingAutomationand controlElectricityproductionsub1M1sub1M2sub1M3 M4 M5 M6 M7 M8 M9 M
35、10M111 General 1 General 1 General 153161 153161 2 Common terms and definitions; symbols, units and subscripts 2 Building Energy Needs 2 Needs 128313 3 Applications 3 (Free) Indoor Conditions without Systems3 Maximum Load and Power 128311 128313 4 Ways to Express Energy Performance 4 Ways to Express
36、 Energy Performance 4 Ways to Express Energy Performance 153161 153161 5 Building Functions and Building Boundaries 5 Heat Transfer by Transmission5 Emission and control 153162 153162 6 Building Occupancy and Operating Conditions 6 Heat Transfer by Infiltration and Ventilation6 Distribution and cont
37、rol 153163 153163 153163 7 Aggregation of Energy Services and Energy Carriers 7 Internal Heat Gains 7 Storage and control 153165 1531651531643 8 Building Partitioning 8 Solar Heat Gains 8 Generation 81 Combustion boilers 1531641 1531641 82 Heat pumps 1531642 1531642 1531642 83 Thermal solar Photovol
38、taics 1531643 1531643 1531643 84 On-site cogeneration 1531644 1531644 1531644 85 District heating and cooling1531645 1531645 1531645 1531645 BS EN 15316410:2017EN 15316-4-10:2017 (E) 7 86 Direct electrical heater 1531646 1531646 87 Wind turbines 1531641088 Radiant heating, stoves 1531648 9 Calculate
39、d Energy Performance 9 Building Dynamics (thermal mass)9 Load dispatching and operating conditions 10Measured Energy Performance 10Measured Energy Performance 10Measured Energy Performance 153783 153783 11 Inspection 11 Inspection 11 Inspection153781 153781 12Ways to Express Indoor Comfort 12 12 BMS
40、 13External Environment Conditions 14Economic Calculation154591 NOTE The shaded modules are not applicable. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the editi
41、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15603, Energy performance of buildings - Overall energy use and definition of energy ratings EN 15316-1, Heating systems in buildings - Method for calculation of system ener
42、gy requirements and system efficiencies - Part 1: General 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15603 and in EN 15316-1 apply. BS EN 15316410:2017EN 15316-4-10:2017 (E) 8 4 Symbols and abbreviations For the purposes of this document, the sym
43、bols and indices of EN 15603 and the following symbols and units (Table 2) and indices (Table 3) apply. Table 2 Symbols and units Symbol Name of quantity Unit A area m2D diameter m h Hub height m v Wind velocity m/s WS Weibull scale factor - k Weibull form factor - Height exponent - Table 3 Indices
44、Rotor Rotor WPS Wind power capacity prod Electricity production WK Velocity class 5 Wind power systems (WPS) 5.1 Input quantities from other parts of the heating system standards For input quantities, see Table 4. Table 4 Input quantities Description Symbol Unit Validity interval Destination module
45、Varying Wind turbine category WIND-TYP List Not relevant No Reference velocity at reference height h1v1m/sec 0 project data yes Number of days in the month dmthd 031 1 - 1 yes rotor area ARotorm20200 project data yes rotor diameter DRotorm 016 project data yes hub height h2m 050 project data yes hei
46、ght exponent - 0 project data yes BS EN 15316410:2017EN 15316-4-10:2017 (E) 9 5.2 Output quantities from other parts of the heating system standards For output quantities see Table 5. Table 5 Output quantities Desciption Symbol Unit Calculation chapter Validity interval Destination module Varying mo
47、nthly net electricity production from WPS, in kWh Qf,prod,WPS,ikWh see 5.8 0 1 - 1 YES 5.3 Monthly mean wind velocity v1in m/s Data on the monthly mean average wind velocities at a reference height of 10 m in various parts of the country by the national Weather Service, unless determined by recordin
48、g the local conditions. When realizing a WPS, it is strictly recommended that wind measurements are conducted on site. The environmental influences can only be reasonably estimated by recording the local conditions as significant effects on the efficiency of the system exist in particular at heights
49、 below 20 m. 5.4 Determination of the WPS and hub height If no further details are known, the categories indicated can be chosen from for a rough selection as listed in Table 6. Here as high a hub height h2 as possible should be provided. In this way, the wind increasing at height can be utilized better. Table 6 Data of typical wind turbines Category Rotor area Wind turbine capacity Rotor diameter Typical hub height ARotorPWPSD
