EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf

上传人:unhappyhay135 文档编号:715202 上传时间:2019-01-04 格式:PDF 页数:12 大小:601.64KB
下载 相关 举报
EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf_第1页
第1页 / 共12页
EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf_第2页
第2页 / 共12页
EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf_第3页
第3页 / 共12页
EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf_第4页
第4页 / 共12页
EN 15599-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 .pdf_第5页
第5页 / 共12页
点击查看更多>>
资源描述

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15599-2:2010Thermal insulation productsfor building equipment andindustrial installations In-situ thermal insulation formedfrom expanded perlite (EP)productsPart 2: Specifi

2、cation for the installedproductsBS EN 15599-2:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15599-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented on th

3、is committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 68708 2ICS 91.100.60Compliance with a British Standard cannot confer immunity froml

4、egal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010.Amendments issued since publicationDate Text affectedBS EN 15599-2:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15599-2 July 2010 ICS 91.100.60 English

5、 Version Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products Produits isolants thermiques pour lisolation du btiment et les installations industriell

6、es - Isolation thermique forme en place base de granulats lgers de perlite expanse (EP) - Partie 2: Spcification de produits mis en place Wrmedmmstoffe fr die Haustechnik und fr betriebstechnische Anlagen - An der Verwendungsstelle hergestellte Wrmedmmung mit Produkten aus expandiertem Perlit (EP) -

7、 Teil 2: Spezifikation fr die eingebauten Produkte This European Standard was approved by CEN on 16 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter

8、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

9、slation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

10、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

11、 NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15599-2:2010: EBS EN 15599-2:2010EN 15599-2:2010 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Te

12、rms and definitions .43.1 Definitions 43.2 Symbols and abbreviations 53.2.1 Symbols used in this part of the standard 53.2.2 Abbreviations used in this part of the standard .54 Requirements .54.1 General 54.2 Thermal resistance 54.3 Installed declared insulation thickness .54.4 Cavity fill .65 In-si

13、tu measurements 65.1 Installed declared insulation thickness .65.2 Width of cavities 65.3 Cavity fill .66 Installers declaration 6Bibliography 7BS EN 15599-2:2010EN 15599-2:2010 (E) 3 Foreword This document (EN 15599-2:2010) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating mate

14、rials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by J

15、anuary 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the Europ

16、ean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard consists of two parts which form a package. The first part, which is the harmonised part satisfying the mandate, the CPD and is the basis for the CE marking, covers

17、the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Attention is drawn to the need to take into account any complementary member state rules (e.g. installation rules) which together with this European S

18、tandard ensures the fitness for purpose of the installed product. This European Standard is one of a series for polyurethane/polyisocyanurate, expanded perlite and exfoliated vermiculite in-situ formed insulation products used in building equipment and industrial installations, but this standard may

19、 be used in other areas where appropriate. EN 14316-1 covers the use of expanded perlite in buildings. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes.

20、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland

21、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15599-2:2010EN 15599-2:2010 (E) 4 1 Scope This European Standard specifies the requirement for expanded perlite products which a

22、re used for in-situ thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately 270 C to + 650 C. This European Standard specifies the requirements for the four types of expanded perlite products, Perlite Aggregate (EPA), Coated P

23、erlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % by mass organic material as determined by Annex C in EN 15599-1:2010. This European Standard is a specification for the installed products. This European Standard also specifies the checks and test procedure

24、s to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-co

25、nflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with expanded perlite. The products covered by this European Standard are not intended to be used primarily for airborne sound insulation or sound absorption applications al

26、though they may improve the performance of the installation in these respects when installed for their primary insulation intended use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited appli

27、es. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 823:1994, Thermal insulating products for building applications Determination of thickness EN 15599-1, Thermal insulation products for building equipment and industrial installations - In

28、-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Definitions 3.1.1 expanded perlite lightweight

29、granular (insulation) material manufactured from naturally occurring volcanic rock expanded by heat to form a cellular structure EN ISO 9229 BS EN 15599-2:2010EN 15599-2:2010 (E) 5 3.1.2 loose fill insulation in-situ insulation formed by pouring the granular material into the void or cavity, without

30、 the use of a bonding material 3.1.3 bonded insulation in-situ insulation formed by bonding the expanded perlite to itself, or to itself and a surface 3.1.4 specifier person responsible for the amount and thickness of the insulation and the type of product to be used in a particular installation 3.1

31、.5 installer person, company or organization which is responsible for the process of installing the insulation product 3.2 Symbols and abbreviations 3.2.1 Symbols used in this part of the standard d is the required thickness of the product m Dis the declared thermal conductivity W/(mK) Rsis the spec

32、ified thermal resistance m2K/W 3.2.2 Abbreviations used in this part of the standard EP is expanded perlite as defined in 3.1.1. 4 Requirements 4.1 General The installer shall use an insulation product that complies with EN 15599-1. The installer shall inspect the proposed installation, in order to

33、determine whether it is suitable for application of the product. 4.2 Thermal resistance The required thermal resistance is obtained using the specified thickness of expanded perlite. The thickness shall be calculated by the specifier before installation starts, according to the formula d= RsD. The r

34、equired thickness shall be compared with the design specification to confirm the suitability of this product. 4.3 Installed declared insulation thickness The mean value of the installed declared thickness shall not be less than the thickness calculated in accordance with 4.2. No individual value sha

35、ll be less than 80 % of the specified value. BS EN 15599-2:2010EN 15599-2:2010 (E) 6 4.4 Cavity fill The cavity shall be filled as specified by the specifier. 5 In-situ measurements 5.1 Installed declared insulation thickness The installed declared insulation thickness of the insulation layer shall

36、be measured by the installer. The method of verification will vary depending on the application. Verification shall include reference to guides or level marks placed before installation and direct measurement after installation using a calibrated depth gauge. At least five insulation thickness measu

37、rements in different places shall be made for each 100 m2insulation area. In case of dispute the installed insulation thickness shall be measured in accordance with EN 823:1994, Annex A, pin and plate method. 5.2 Width of cavities The width of a cavity shall be determined by reference to design draw

38、ings or use of a suitable test. This determination will normally be carried out by the specifier, before installation starts. 5.3 Cavity fill For insulation applied in a cavity, the installer shall check to ensure that the cavity is filled as specified. 6 Installers declaration The installer (in con

39、junction with the specifier) shall declare to the customer that the work has been carried out in accordance with the requirements of this standard using an insulation product that complies with EN 15599-1. The installer shall state at least the following information: trade name and designation code

40、of the installed product; declared thermal resistance; required thermal resistance; required thickness; installed declared thickness; volume of insulation material used; date of installation. The installer shall also declare that the work has been carried out according to the specified procedure. BS

41、 EN 15599-2:2010EN 15599-2:2010 (E) 7 Bibliography 1 EN 14316-1 Thermal insulation products for buildings In-situ thermal insulation formed from expanded perlite (EP) products Part 1: Specification for bonded and loose-fill products before installation 2 EN ISO 9229, Thermal insulation Vocabulary (I

42、SO 9229:2007) This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international

43、level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sur

44、e that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsi

45、ble, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20

46、 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44

47、(0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand intern

48、ational standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1