1、BS EN 15805:2009ICS 91.140.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDParticulate air filtersfor general ventilation StandardiseddimensionsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 January2010
2、 BSI 2010ISBN 978 0 580 61928 1Amendments/corrigenda issued since publicationDate CommentsBS EN 15805:2009National forewordThis British Standard is the UK implementation of EN 15805:2009.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/21/3, Air filters other than for
3、air supply for I.C.engines and compressors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a Brit
4、ish Standard cannot confer immunityfrom legal obligations.BS EN 15805:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15805 December 2009 ICS 91.140.30 English Version Particulate air filters for general ventilation - Standardised dimensions Filtres air de ventilation gnrale pour lliminatio
5、n des particules - Dimensions normalises Partikel-Luftfilter fr die allgemeine Raumlufttechnik - Standardisierte Abmessungen This European Standard was approved by CEN on 21 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
6、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official v
7、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belg
8、ium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR
9、 STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15805:2009: EBS EN 15805:2009EN 15805:2009 (E)
10、 2 Contents Foreword 31 Scope 42 Normative references 43 Terms and definitions . 44 Face dimensions 5Bibliography 7BS EN 15805:2009EN 15805:2009 (E) 3 Foreword This document (EN 15805:2009) has been prepared by Technical Committee CEN/TC 195 “Air filters for general air cleaning”, the secretariat of
11、 which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possib
12、ility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard deals with the dimensions of air filters for general ventilation. According to the CEN/CENELEC
13、Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg
14、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15805:2009EN 15805:2009 (E) 4 1 Scope This European Standard specifies the header frame dimensions of air filters for general ventilation to be used in air handling u
15、nits, air intake system filters for rotary machinery and other applications. This includes pocket filters, rigid (V type) filters and filters to which header frame dimensions are applicable. 2 Normative references The following referenced documents are indispensable for the application of this docum
16、ent. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14799:2007, Air filters for general air cleaning Terminology 3 Terms and definitions For the purposes of this document, the terms an
17、d definitions given in EN 14799:2007 and the following apply. 3.1 face dimensions width (W) and height (H) of the overall filter NOTE See Figure 1. 3.2 header frame integral rigid frame of a filter enabling it to be fastened and sealed against the holding frame 3.3 holding frame rigid structural fra
18、me, part of air handling system into which filters are fastened and sealed BS EN 15805:2009EN 15805:2009 (E) 5 Key W width of the overall filter H height of the overall filter Figure 1 Face dimensions of the air filter 4 Face dimensions The face dimensions are indicated in Table 1. Permissible toler
19、ances for holding frame dimensions are + 0 mm and - 2 mm. Permissible tolerances for filter face dimensions (header dimensions) are + 3 mm and - 2 mm. Table 1 Face dimensions Holding frame dimensions (Nominal dimensions)a Filter face dimensions (Header dimensions) Width mm Heightmm Widthmm Heightmm
20、610 610 592 592508 610 490 592 305 610 287 592610 305 592 287 508 305 490 287305 305 287 287 aHolding frame nominal dimensions are reported for information only. Actual holding frame dimensions shall be adapted to match the header dimensions defined in this standard.The header frames dimensions shal
21、l be 18 mm smaller than the external dimensions of the corresponding holding frames. For side access systems, the filter channel shall be designed to accommodate filter dimensions and tolerances defined in this standard. BS EN 15805:2009EN 15805:2009 (E) 6 The header frame depth (d) and width (f) ar
22、e shown in Figure 2. The preferred depth shall be 25 mm. The alternative depth is 20 mm. The tolerance shall be 0,5 mm. The width (f) shall be between 16 mm and 21 mm. Key d header frame depth f header frame width Figure 2 Header frame depth and width BS EN 15805:2009EN 15805:2009 (E) 7 Bibliography
23、 1 EUROVENT, Recommendation 09, Standard front dimensions of air filters BS EN15805:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStanda
24、rds. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim
25、 of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20
26、 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer
27、Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British
28、 Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on
29、all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits co
30、ntact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI
31、publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic,
32、photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
