1、Specifications for external renders and internal plasters based on organic bindersBS EN 15824:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15824 June 2017 ICS 91.100.10 Supersedes EN 15824:2009English Versio
2、n Specifications for external renders and internal plasters based on organic binders Spcifications pour enduits de maonnerie organiques extrieurs et intrieurs Festlegungen fr Auen- und Innenputze mit organischen Bindemitteln This European Standard was approved by CEN on 9 April 2016. CEN members are
3、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t
4、he CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cen
5、tre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan
6、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix
7、17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15824:2017 ENational forewordThis British Standard is the UK implementation of EN 15824:2017. It supersedes BS EN 15824:2009 which is withdrawn.The UK partici
8、pation in its preparation was entrusted to Technical Committee B/519/2, Mortar.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corr
9、ect application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 84517 8ICS 91.100.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strat
10、egy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 15824:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15824 June 2017 ICS 91.100.10 Supersedes EN 15824:2009English Version Specifications for external renders and intern
11、al plasters based on organic binders Spcifications pour enduits de maonnerie organiques extrieurs et intrieurs Festlegungen fr Auen- und Innenputze mit organischen Bindemitteln This European Standard was approved by CEN on 9 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal R
12、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN m
13、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions
14、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola
15、nd, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of explo
16、itation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15824:2017 EBS EN 15824:2017EN 15824:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Product characteristics . 7 4.1 General 7
17、4.2 Water vapour permeability . 7 4.3 Water absorption 8 4.4 Adhesion . 8 4.5 Durability . 8 4.6 Thermal conductivity 8 4.7 Reaction to fire . 9 4.8 Dangerous substances . 9 4.9 Summary of specifications . 9 5 Description and designation 10 5.1 Description . 10 5.2 Designation. 10 6 Marking and labe
18、lling . 10 7 Assessment and verification of constancy of performance (AVCP) . 11 7.1 General . 11 7.2 Product-type determination 11 7.2.1 General . 11 7.2.2 Sampling 11 7.2.3 Reference test 11 7.2.4 Repeating of product-type determination 11 7.2.5 Recording 11 7.2.6 Application of test methods 12 7.
19、3 Factory Production Control, FPC 12 7.3.1 General . 12 7.3.2 Process control 12 7.3.3 Finished product conformity . 12 7.3.4 Statistical techniques 13 7.3.5 Traceability marking and stock control of products . 13 7.3.6 Non-conforming products . 13 Annex A (informative) Indicative test frequencies f
20、or Factory Production Control (FPC) 14 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.305/2011 15 ZA.1 Scope and relevant characteristics 15 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 16 BS EN 15824:2017EN 15824:2017 (E) 3 ZA.
21、3 Assignment of AVCP tasks . 16 Bibliography . 19 BS EN 15824:2017EN 15824:2017 (E) 4 European foreword This document (EN 15824:2017) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This document supersedes EN 15824:2009. This European Standard
22、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2017, and conflicting national standards shall be withdrawn at the latest by March 2019. This document has been prepared under a mandate given to CEN by the Euro
23、pean Commission and the European Free Trade Association, and supports basic requirements for construction works of the EU Construction Products Regulation (Regulation (EU) No 305/2011. For relationship with EC Regulation, see informative Annex ZA, which is an integral part of this document. The most
24、 significant changes compared to the previous edition include: a) implementation of new regulatory (CPR) terminology where relevant; b) revised text in 4.6 Thermal conductivity (deriving from EN 998-2); c) revised clauses on Assessment and verification of constancy of performance (AVCP); d) new anne
25、x with indicative frequencies on testing for factory production control (informative); e) revised Annex ZA (informative); f) some minor editorial changes. No changes to existing technical classes and/or threshold levels have been made. According to the CEN-CENELEC Internal Regulations, the national
26、standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani
27、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15824:2017EN 15824:2017 (E) 5 Introduction The characteristics of external renders and internal plasters based on organic binders are pri
28、marily determined by the type or types of binders used and their respective proportions. Organic renders and plasters can be defined according to: the chemical and physical nature of the main active binder(s) and its state of dissolution, dispersion, or powder, which is decisive for the final charac
29、teristics of the surface covering with one or several coats; the finishes determined by the aggregate distribution and application technique; the characteristics and/or type of use. Renders and plasters do not attain their final characteristics until properly dried and hardened after application. Th
30、e functions performed by renders and plasters depend on the characteristics of the type of raw materials used, on the thickness of the coats and the type of application. The manufacturer designates the appropriate characteristics for end use and appearance and should give information about the use o
31、f the renders or plasters and the relevant conditions of use. BS EN 15824:2017EN 15824:2017 (E) 6 1 Scope This European Standard is applicable to factory-made renders and plasters based on organic binders used for external or internal covering on walls, columns, partitions and ceilings. The products
32、 are manufactured in paste form, ready to use, or in powder form. This European Standard is also applicable to renders and plasters with inorganic binders such as silicates, silanes, siloxanes and silicones. Renders and plasters can form the final surface of the structure, textured or not, or they c
33、an provide a levelling of the substrate, adequately smooth for subsequent decorative treatments. This European Standard contains definitions and final performance requirements. It includes relevant characteristic categories to designate renders and plasters. This European Standard provides for the a
34、ssessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included. This European Standard is not applicable to coating materials and coating systems according to EN 1062-1 and EN
35、13300. This European Standard does not contain recommendations for the design and application of renders and plasters. However, this European Standard may be used for definition of renders and plasters in conjunction with codes of application and national specifications for execution of works. 2 Nor
36、mative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments
37、) applies. EN 1015-2, Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars EN 1062-3, Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability EN 1542, Prod
38、ucts and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off EN 1745:2012, Masonry and masonry products - Methods for determining thermal properties EN 13501-1, Fire classification of construction products and building elements - Par
39、t 1: Classification using data from reaction to fire tests EN 13687-3, Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact EN 13820, Thermal insulating materials for b
40、uilding applications - Determination of organic content EN ISO 7783, Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783) EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528) BS EN 15824:2017EN 15824:2017 (E
41、) 7 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 render and plaster product in paste or powder form, consisting of a mix of one or more organic binders, aggregates, additives/additions, with water or solvent used for external rendering or
42、internal plastering Note 1 to entry: Render or plaster may be the product delivered by the manufacturer or the applied material on site. 3.2 declared value value that a manufacturer is confident in achieving, taking into account the precision of test method, the variability of the production process
43、(es) and the product performance 3.3 substrate surface to which the plaster or render is applied or is to be applied Note 1 to entry: Examples are coated or uncoated masonry, concrete, gypsum elements, gypsum or cementitious boards for walls, columns, partitions and ceilings. 3.4 product-type set of
44、 representative performance levels or classes of a construction product, in relation to its essential characteristics, produced using a given combination of raw materials or other elements in a specific production process Note 1 to entry: The definition is taken from Regulation (EU) No. 305/2011 4 P
45、roduct characteristics 4.1 General The requirements on characteristics for dried and hardened renders and plasters shall be defined using the test methods and procedures referred to in this European Standard. For these tests, renders and plasters in paste form shall be sampled in accordance with EN
46、ISO 15528 and renders and plasters in powder form in accordance with EN 1015-2. NOTE The characteristics of renders and plasters are specified under laboratory conditions and cannot always be directly compared with the characteristics obtained under site conditions. In all tests the layer thickness
47、recommended in the manufacturers instructions shall be used. 4.2 Water vapour permeability Water vapour permeability shall be determined for external renders by measuring the water vapour transmission rate in accordance with EN ISO 7783 and shall be categorized in accordance with the values given in
48、 Table 1. BS EN 15824:2017EN 15824:2017 (E) 8 Table 1 Categories for water vapour transmission rate (V) Category Requirement Water vapour transmission rate V g/(m d) Diffusion equivalent to the air layer thickness sdm aV1High 150 15 0,14 0,5 W2Medium 0,5 0,1 W3Low 0,1 4.4 Adhesion Adhesion of the sy
49、stem shall be declared and shall be determined in accordance with EN 1542 after drying, hardening and conditioning for 28 d at (23 2) C and (50 10) % relative humidity. All measured values shall be not less than 0,3 MPa. 4.5 Durability If the liquid water permeability of an external render assessed according to 4.3 is w 0,5 kg/(m h0,5) the durability against freeze-thaw shall be tested according to EN 13687-3 and the adhesion after freeze-thaw cycles shall be declared. All measured values after freeze-thaw cycles shall not be less than
