1、BSI Standards PublicationBS EN 16740:2015Emission safety of combustibleair fresheners User safetyinformationBS EN 16740:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16740:2015.The UK participation in its preparation was entrusted to TechnicalCommittee EH
2、/2/5, Emissions to internal environments.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards In
3、stitution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 86160 4ICS 13.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendment
4、s/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16740:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16740 November 2015 ICS 13.040.20 English Version Emission safety of combustible air fresheners - User safety information Scurit des missions des dsodorisants combust
5、ion - Informations de scurit pour lutilisateur Emissionssicherheit brennbarer Lufterfrischer - Verbraucherschutzinformationen This European Standard was approved by CEN on 17 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
6、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three of
7、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies
8、of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain
9、, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide
10、for CEN national Members. Ref. No. EN 16740:2015 EBS EN 16740:2015EN 16740:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Product safety labels 4 4.1 Safety information 4 4.2 Layout of a product safety label . 6 Bibliography 7 BS EN 16
11、740:2015EN 16740:2015 (E) 3 European foreword This document (EN 16740:2015) has been prepared by Technical Committee CEN/TC 421 “Project Committee - Emission safety of combustible air fresheners”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national
12、 standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. C
13、EN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus
14、, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United K
15、ingdom. BS EN 16740:2015EN 16740:2015 (E) 4 1 Scope This European Standard defines appropriate user safety labelling related to the emissions from combustible air fresheners. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indi
16、spensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15494, Candles - Product safety labels EN 16738:2015, Emission safety of combustible air fresheners Test m
17、ethods EN ISO 7010:2012, Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16738:2015 apply. 4 Product safety labels 4.1 Safety information The messages specif
18、ied in Table 1 represent safety information with which combustible air fresheners shall be labelled. BS EN 16740:2015EN 16740:2015 (E) 5 Table 1 Safety information for combustible air fresheners SAFETY INFORMATION SYMBOL SAFETY INFORMATION TEXT a) b) c) d) e) Figure 1 Ventilate the room after use pi
19、ctograms Ventilate the room after use Figure 2 Avoid direct inhalation of any smoke pictogram Avoid direct inhalation of any smoke This safety information shall be given on a product safety label in the form of a symbol (see Table 1, 1st column) or text (see Table 1, 2nd column). It shall be visible
20、 and legible on the packaging or product. In cases that the safety labelling on the packaging or product is not practical, an instruction leaflet shall be available at the point of sale. Figure 3 (see Regulation (EC) No 1223/2009) can be used to refer to these instructions. BS EN 16740:2015EN 16740:
21、2015 (E) 6 Figure 3 Reference to enclosed or attached information If safety information texts are chosen rather than safety information symbols then they shall be given in their own national language or languages of the country in which the products are marketed. The number of symbols or texts used
22、for each product should be based on risk assessment. 4.2 Layout of a product safety label A product safety label for combustible air fresheners consists of the following components: Form 1: General warning sign (see Figure 4) and supplementary safety information symbol (see Table 1, 1st column); or
23、Form 2: General warning sign (see Figure 4) and supplementary safety information text (see Table 1, 2nd column). Figure 4 ISO 7010-W001, General warning sign The safety information symbol or text shall be placed below or beside the general warning sign and can be combined with the ones present in EN
24、 15494 in case of scented candles. To draw the attention of the user to the product safety label it is recommended to use the safety colour yellow (see ISO 3864-2:2004, Table 1). BS EN 16740:2015EN 16740:2015 (E) 7 Bibliography 1 ISO 3864-2:2004, Graphical symbols Safety colours and safety signs Par
25、t 2: Design principles for product safety labels 2 REGULATION (EC) No 1223/2009 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 on cosmetic product This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards
26、 and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout
27、usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation
28、process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Cust
29、omer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from
30、other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll
31、 have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standa
32、rds, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subsc
33、ribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation
34、is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other
35、BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international
36、 standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photo
37、copying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
