EN 22313-1992 en Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of Recovery《纺织品 横褶样品褶痕恢复的测定 测量复原角度法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS B0405-1991 General tolerances-Part 1：Tolerances for linear and angular dimensions without individual tolerance indications.pdf

JIS B0408-1991 金属板冲压加工件一般尺寸公差.pdf

JIS B0410-1991 General tolerances for parts formed by shear from metal plates.pdf

JIS B0411-1978 Permissible Deviations in Dimensions without Tolerance Indication for Metallic Sintered Products.pdf

JIS B0415-1975 Dimensional Tolerance for Steel Die Forgings(Hammer and Press Forging).pdf

JIS B0417-1979 Permissible Deviation in Dimensions without Tolerance Indication for Gas Cut Steel Plates.pdf

JIS B0418-1999 Machining allowance for open die forgings.pdf

JIS B0601-1994 英文版 Surface roughness-Definitions and designation.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf