1、BS EN 50341-2-16:2016Overhead electrical lines exceeding AC 1 kVPart 2-16: National Normative Aspects (NNA) for NORWAY (based on EN 50341-1:2012)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 50341-2-16:2016EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 503
2、41-2-16December 2016ICS 29.240.20English VersionOverhead electrical lines exceeding AC 1 kV - Part 2-16:National Normative Aspects (NNA) for NORWAY (based on EN50341-1:2012)Lignes lectriques ariennes dpassant 1 kV en courantalternatif - Partie 2-16 : Aspects Normatifs Nationaux pourla NORVEGE (Bas s
3、ur lEN 50341-1:2012)This European Standard was approved by CENELEC on 2016-09-13. CENELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists an
4、d bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under t
5、he responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia,
6、 Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom.European Committee for Ele
7、ctrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref
8、. No. EN 50341-2-16:2016 EBS EN 50341-2-16:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50341-2-16:2016. This standard, together with the following list of National Normative Aspect standards, supersedes BS EN 50423-3:2005 and BS EN 50341-3:2001:Country
9、CodeOrigin RefAT Austrian National Committee BS EN 50341-2-1 BE Belgian National Committee BS EN 50341-2-2 CH Swiss National Committee BS EN 50341-2-3 DE German National Committee BS EN 50341-2-4:2016DK Danish National Committee BS EN 50341-2-5:2017 ES Spanish National Committee BS EN 50341-2-6:2017
10、 FI Finnish National Committee BS EN 50341-2-7:2015FR French National Committee BS EN 50341-2-8 GB British National Committee BS EN 50341-2-9:2015GR Greek National Committee BS EN 50341-2-10 IE Irish National Committee BS EN 50341-2-11 IS Iceland National Committee BS EN 50341-2-12 IT Italian Nation
11、al Committee BS EN 50341-2-13 LU Luxemburg National Committee No NNA available NL Nederlands National Committee BS EN 50341-2-15 NO Norwegian National Committee BS EN 50341-2-16:2016PT Portuguese National Committee BS EN 50341-2-17 SE Swedish National Committee BS EN 50341-2-18 SK Slovak National Co
12、mmittee BS EN 50341-2-23:2016CZ Czech National Committee BS EN 50341-2-19:2015EE Estonian National Committee BS EN 50341-2-20:2015 SK Slovak National Committee BS EN 50341-2-21:2016 PL Polish National Committee BS EN 50341-2-22:2016BS EN 50423-3:2005 and BS EN 50341-3:2001 will be withdrawn upon pub
13、lication of the rest of the series.The UK participation in its preparation was entrusted to Technical Committee PEL/11, Overhead Lines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary prov
14、isions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 92260 2ICS 29.240.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publis
15、hed under the authority of the Standards Policy and Strategy Committee on 28 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 50341-2-16:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50341-2-16 December 2016 ICS 29.240.20 English Version Overhead electrical
16、 lines exceeding AC 1 kV - Part 2-16: National Normative Aspects (NNA) for NORWAY (based on EN 50341-1:2012) Lignes lectriques ariennes dpassant 1 kV en courant alternatif - Partie 2-16 : Aspects Normatifs Nationaux pour la NORVEGE (Bas sur lEN 50341-1:2012) This European Standard was approved by CE
17、NELEC on 2016-09-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand
18、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own languag
19、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
20、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normal
21、isation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50341-2-16:2016 E BS EN 50341-2-16:2016E
22、N 50341-2-16:2016 -2/31 - Norway Contents Foreword . 5 1 Scope 6 2 Normative references, definitions and symbols 6 2.1 NO.1 Normative references 6 3 NO.1 Basis of design . 6 3.2 Requirements of overhead lines . 6 3.2.1 NO.1 Basic requirements . 6 4 Actions on lines 6 4.1 NO.1 Introduction 6 4.2 NO.1
23、 Permanent loads 7 4.3 NO.1 Wind Loads 7 4.3.1 NO.1 Field of application and basic wind velocity . 7 4.3.2 NO.1 Mean wind velocity . 7 4.3.3 NO.1 Mean wind pressure 7 4.3.4 NO.1 Turbulence intensity and peak wind pressure . 8 4.3.5 NO.1 Wind forces on any overhead line component 8 4.4 Wind forces on
24、 overhead line components . 8 4.4.1 NO.1 Wind forces on conductors 8 4.4.1.1 NO.1 General . 9 4.4.1.2 NO.1 Structural factor . 9 4.4.1.3 NO.1 Drag factor . 9 4.4.2 NO.1 Wind forces on insulator sets 9 4.4.3 NO.1 Wind forces on lattice towers 10 4.4.4 NO.1 Wind forces on poles 10 4.5 Ice loads . 10 4
25、.5.1 NO.1 General . 10 4.5.2 NO.1 Ice forces on conductors 10 4.6 NO.1 Combined wind and ice loads . 11 4.6.1 NO.1 Combined probabilities . 11 4.6.2 NO.1 Drag factors and ice densities . 11 BS EN 50341-2-16:2016Norway -3/31 - EN 50341-2-16:2016 4.6.3 NO.1 Mean wind pressure and peak wind pressure 12
26、 4.6.4 NO.1 Equivalent diameter D of ice covered conductor . 13 4.6.5 NO.1 Wind forces on support for ice covered conductors 13 4.6.6 Combination of wind velocities and ice loads . 13 4.6.6.1 NO.1 Extreme ice load ITcombined with a high probability wind velocity VIH13 4.6.6.2 NO.1 Nominal ice load I
27、3combined with a low probability wind velocity VIL13 4.7 NO.1 Temperature effects . 13 4.8 Security loads . 14 4.8.1 NO.1 General . 14 4.8.2 NO.1 Torsional loads 14 4.8.3 NO.1 Longitudinal loads . 14 4.8.4 NO.1 Mechanical conditions of application . 14 4.9 Safety Loads 14 4.9.1 NO.1 Construction and
28、 maintenance loads 14 4.9.2 NO.1 Loads related to the weight of linesmen 15 4.10 NO.1 Forces due to short-circuit currents 15 4.11 Other special forces 15 4.11.1 NO.1 Avalanches, creeping snow . 15 4.11.2 NO.1 Earthquakes . 15 4.12 Load cases. 16 4.12.1 NO.1 General . 16 4.12.2 NO.1 Standard load ca
29、ses . 16 4.13 NO.1 Partial factors for actions . 17 5 Electrical requirements 21 5.6 Load cases for calculation of clearances 21 5.6.1 NO.1 Load conditions 21 5.8 Internal clearances within the span and at the top of support . 22 5.9 NO.1 External clearances . 24 6 Earthing systems . 24 6.2 Ratings
30、with regard to corrosion and mechanical strength. 24 6.2.2 NO.1 Earthing and bonding conductors 24 6.4 Dimensioning with regard to human safety . 24 6.4.1 NO.1 Permissible values . 24 7 Supports . 25 BS EN 50341-2-16:2016EN 50341-2-16:2016 Norway 2/31 BS EN 50341-2-16:2016EN 50341-2-16:2016 -2/31 -
31、Norway Contents Foreword . 5 1 Scope 6 2 Normative references, definitions and symbols 6 2.1 NO.1 Normative references 6 3 NO.1 Basis of design . 6 3.2 Requirements of overhead lines . 6 3.2.1 NO.1 Basic requirements . 6 4 Actions on lines 6 4.1 NO.1 Introduction 6 4.2 NO.1 Permanent loads 7 4.3 NO.
32、1 Wind Loads 7 4.3.1 NO.1 Field of application and basic wind velocity . 7 4.3.2 NO.1 Mean wind velocity . 7 4.3.3 NO.1 Mean wind pressure 7 4.3.4 NO.1 Turbulence intensity and peak wind pressure . 8 4.3.5 NO.1 Wind forces on any overhead line component 8 4.4 Wind forces on overhead line components
33、. 8 4.4.1 NO.1 Wind forces on conductors 8 4.4.1.1 NO.1 General . 9 4.4.1.2 NO.1 Structural factor . 9 4.4.1.3 NO.1 Drag factor . 9 4.4.2 NO.1 Wind forces on insulator sets 9 4.4.3 NO.1 Wind forces on lattice towers 10 4.4.4 NO.1 Wind forces on poles 10 4.5 Ice loads . 10 4.5.1 NO.1 General . 10 4.5
34、.2 NO.1 Ice forces on conductors 10 4.6 NO.1 Combined wind and ice loads . 11 4.6.1 NO.1 Combined probabilities . 11 4.6.2 NO.1 Drag factors and ice densities . 11 BS EN 50341-2-16:2016Norway -3/31 - EN 50341-2-16:2016 4.6.3 NO.1 Mean wind pressure and peak wind pressure 12 4.6.4 NO.1 Equivalent dia
35、meter D of ice covered conductor . 13 4.6.5 NO.1 Wind forces on support for ice covered conductors 13 4.6.6 Combination of wind velocities and ice loads . 13 4.6.6.1 NO.1 Extreme ice load ITcombined with a high probability wind velocity VIH13 4.6.6.2 NO.1 Nominal ice load I3combined with a low proba
36、bility wind velocity VIL13 4.7 NO.1 Temperature effects . 13 4.8 Security loads . 14 4.8.1 NO.1 General . 14 4.8.2 NO.1 Torsional loads 14 4.8.3 NO.1 Longitudinal loads . 14 4.8.4 NO.1 Mechanical conditions of application . 14 4.9 Safety Loads 14 4.9.1 NO.1 Construction and maintenance loads 14 4.9.
37、2 NO.1 Loads related to the weight of linesmen 15 4.10 NO.1 Forces due to short-circuit currents 15 4.11 Other special forces 15 4.11.1 NO.1 Avalanches, creeping snow . 15 4.11.2 NO.1 Earthquakes . 15 4.12 Load cases. 16 4.12.1 NO.1 General . 16 4.12.2 NO.1 Standard load cases . 16 4.13 NO.1 Partial
38、 factors for actions . 17 5 Electrical requirements 21 5.6 Load cases for calculation of clearances 21 5.6.1 NO.1 Load conditions 21 5.8 Internal clearances within the span and at the top of support . 22 5.9 NO.1 External clearances . 24 6 Earthing systems . 24 6.2 Ratings with regard to corrosion a
39、nd mechanical strength. 24 6.2.2 NO.1 Earthing and bonding conductors 24 6.4 Dimensioning with regard to human safety . 24 6.4.1 NO.1 Permissible values . 24 7 Supports . 25 NorwayBS EN 50341-2-16:2016EN 50341-2-16:2016 3/31 BS EN 50341-2-16:2016EN 50341-2-16:2016 -4/31 - Norway 7.1 Initial design c
40、onsideration . 25 7.1.1 NO.1 Introduction . 25 7.1.2 NO.1 Structural design resistance of a pole 25 7.1.3 NO.1 Buckling resistance . 25 7.2 NO.1 Materials . 25 7.3 NO.1 Lattice steel towers . 25 7.3.6 NO.1 Ultimate limit states 26 7.3.6.1 NO.1 General . 26 7.4 NO.1 Steel poles 26 7.5 Wood poles 26 7
41、.5.5 Ultimate limit states . 26 7.5.5.1 NO.1 Basis . 26 7.5.7 NO.1 Resistance of connections 26 7.6 NO.1 Concrete poles. 27 7.7 NO.1 Guyed structures . 27 7.7.1 NO.1 General . 27 7.7.4 Ultimate limit states 27 7.7.4.1 NO.1 Basis . 27 7.8 Other structures 27 7.9 NO.1 Corrosion protection and finishes
42、. 27 8 Foundations 27 8.2 Basis of geotechnical design by (EN 1997-1:2004 Section2) 27 8.2.3 Design by prescriptive measures . 27 9 Conductors, earthwires and telecommunication cables 30 10 Insulators 30 10.7 NO.1 Mechanical requirements 31 11 Hardware . 31 11.6 NO.1 Mechanical requirements . 31 12
43、Quality assurance, checks and taking-over . 31 BS EN 50341-2-16:2016Norway -5/31 - EN 50341-2-16:2016 European foreword 1 The Norwegian National Committee (NC) is identified by the following address: Norsk Elektroteknisk Komit Mustads vei 1, NO-0283 Oslo Phone no. +47 67 83 31 00 E-mail: Neknek.no 2
44、 The Norwegian NC has prepared this Part 2-16 of EN 50341-1:2012, listing the Norwegian national normative aspects, under its sole responsibility, and duly passed it through the CENELEC and CLC/TC 11 procedures. NOTE The Norwegian NC also takes sole responsibility for the technically correct coordin
45、ation of this EN 50341-2-16 with EN 50341-1:2012. It has performed the necessary checks in the frame of quality assurance/control. It is noted however that this quality assurance/control has been made in the framework of the general responsibility of a standards committee under the national laws/reg
46、ulations. 3 This EN 50341-2-16 is normative in Norway and informative for other countries. 4 This EN 50341-2-16 has to be read in conjunction with EN 50341-1:2012, hereinafter referred to as Part 1. All clause numbers used in this Part 2-16 correspond to those of Part 1. Specific subclauses, which a
47、re prefixed “NO”, are to be read as amendments to the relevant text in Part 1. Any necessary clarification regarding the application of Part 2-16 in conjunction with Part 1 shall be referred to the Norwegian NC who will, in cooperation with CLC/TC 11 clarify the requirements. When no reference is ma
48、de in Part 2-16 to a specific subclause, then Part 1 applies. 5 In the case of “boxed values” defined in Part 1, amended values (if any) which are defined in Part 2-16 shall be taken into account in Norway. However any “boxed values“, whether in Part 1 or Part 2-16, shall not be amended in the direction of greater risk in a Project Specification. 6 The national Norwegian standards/regulations related to overhead electrical lines exceeding 1 kV (AC) are identified in 2.1/NO1. NOTE All national standards referred to in this Part 2-16 will be replaced
