1、BS EN 50341-2-5:2017Overhead electrical linesexceeding AC 1 kV Part 2-5:National Normative Aspects(NNA) for DENMARK (based onEN 50341-1:2012)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 50341-2-5:2017EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 50341-2-
2、5February 2017ICS 29.240.20English VersionOverhead electrical lines exceeding AC 1 kV - Part 2-5: NationalNormative Aspects (NNA) for DENMARK(based on EN 50341-1:2012)Lignes lectriques ariennes dpassant 1 kV en courantalternatif - Partie 2-5: Aspects normatifs nationaux(NNA)pour le DANEMARK (bas sur
3、 lEN 50341-1:2012)This European Standard was approved by CENELEC on 2017-02-01.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu
4、ngary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation Electrot
5、echniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 50341-2-5:2017 EBS EN 50341-2-5:2017 BRITISH STANDARDNation
6、al forewordThis British Standard is the UK implementation of EN 50341-2-5:2017. This standard, together with the following list of National Normative Aspect standards, supersedes BS EN 50423-3:2005 and BS EN 50341-3:2001:Country CodeOrigin RefAT Austrian National Committee BS EN 50341-2-1 BE Belgian
7、 National Committee BS EN 50341-2-2 CH Swiss National Committee BS EN 50341-2-3 DE German National Committee BS EN 50341-2-4:2016DK Danish National Committee BS EN 50341-2-5:2017ES Spanish National Committee BS EN 50341-2-6 FI Finnish National Committee BS EN 50341-2-7:2015FR French National Committ
8、ee BS EN 50341-2-8 GB British National Committee BS EN 50341-2-9:2015GR Greek National Committee BS EN 50341-2-10 IE Irish National Committee BS EN 50341-2-11 IS Iceland National Committee BS EN 50341-2-12 IT Italian National Committee BS EN 50341-2-13:2017LU Luxemburg National Committee No NNA avai
9、lable NL Nederlands National Committee BS EN 50341-2-15 NO Norwegian National Committee BS EN 50341-2-16:2016PT Portuguese National Committee BS EN 50341-2-17 SE Swedish National Committee BS EN 50341-2-18 CZ Czech National Committee BS EN 50341-2-19:2015EE Estonian National Committee BS EN 50341-2-
10、20:2015 PL Polish National Committee BS EN 50341-2-22:2016SK Slovak National Committee BS EN 50341-2-23:2016 BS EN 50423-3:2005 and BS EN 50341-3:2001 will be withdrawn upon publication of the rest of the series.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/11, Over
11、head Lines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published b
12、y BSI Standards Limited 2017ISBN 978 0 580 97923 1ICS 29.240.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since p
13、ublicationDate Text affectedBS EN 50341-2-5:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50341-2-5 February 2017 ICS 29.240.20 English Version Overhead electrical lines exceeding AC 1 kV - Part 2-5: National Normative Aspects (NNA) for DENMARK (based on EN 50341-1:2012) Lignes lectriques
14、 ariennes dpassant 1 kV en courant alternatif - Partie 2-5: Aspects normatifs nationaux (NNA)pour le DANEMARK (bas sur lEN 50341-1:2012) This European Standard was approved by CENELEC on 2017-02-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
15、Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, T
16、urkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form
17、and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50341-2-5:2017 E BS EN 50341-2-5:2017EN 50341-2-5:2017 -2/12- Denmark Contents Page European foreword 4 1 Scope 5 1.1 DK.1 Reliability levels . 5 2 Normative references, definitions and symbols 5 2.1 DK.1 Normative references . 5 2
18、.3 DK.1 Symbols . 5 3 Basis of design 6 3.2 Requirements of overhead lines 6 3.2.2 DK.1 Reliability levels 6 4 Actions on lines . 6 4.1 DK.1 Introduction . 6 4.3 Wind loads . 6 4.3.1 DK.1 Field of application and basic wind velocity 6 Table 4.3.1/DK.1 - Reference wind speeds in Denmark . 6 4.3.3 DK.
19、1 Mean wind pressure 6 4.4 Wind forces on overhead line components . 6 4.4.1 Wind forces on conductors 6 4.4.1.1 DK.1 General . 6 DK.2 General . 6 4.4.1.3 DK.1 Drag factor 7 4.4.3 Wind forces on lattice towers . 7 4.4.3.1 DK.1 General . 7 4.4.4 DK.1 Wind forces on poles 7 4.5 Ice loads 7 4.5.1 DK.1
20、General . 7 4.5.2 DK.1 Ice forces on conductors 7 4.6 Combined wind and ice loads 7 4.6.6 Combination of wind velocity and ice loads 7 4.6.6.1 DK.1 Extreme ice load IT combined with a high probability wind velocity VIH 7 4.6.6.2 DK.1 Nominal ice load l3 combined with a low probability wind velocity
21、VIL . 7 4.7 DK.1 Temperature effects 7 4.8 Security loads 7 4.8.2 DK.1 Torsional loads . 8 4.8.3 DK.1 Longitudinal loads 9 4.12 Load cases 9 4.12.1 DK.1 General . 9 4.12.2 DK.1 Standard load cases . 9 4.13 DK.1 Partial factors for actions 9 5 Electrical requirements 9 5.6 Load cases for calculation
22、of clearances 9 5.6.1 DK.1 Load conditions . 9 5.6.2 DK.1 Maximum conductor temperature 9 5.6.3 DK.1 Wind loads for determination of electric clearances 9 5.6.3.2 DK.1 Nominal wind loads for determination of internal and external clearances 10 5.6.4 DK.1 Ice loads for determination of electric clear
23、ances . 10 5.6.5 DK.1 Combined wind and ice loads 10 5.8 DK.1 Internal clearances within the span and at the top of support 10 5.9 External clearances 10 5.9.3 DK.1 External clearances to residential and other buildings . 10 5.9.4 DK.1 External clearances to crossing traffic routes 10 5.9.7 DK.1 Ext
24、ernal clearances to recreational areas (playgrounds, sports areas, etc.) . 10 6 Earthing systems 11 7 Supports . 11 7.1 Initial design considerations . 11 7.1.1 DK.1 Introduction . 11 7.2.1 DK.1 Steel materials, bolts, nuts and washers, welding consumables . 11 BS EN 50341-2-5:2017Denmark -3/12- EN
25、50341-2-5:2017 7.2.4 DK.1 Holding-down bolts . 11 7.3.6 Ultimate limit states . 11 7.3.6.1 DK.1 General 11 7.4.6.1 DK.1 General 11 7.4.8 Resistance of connections 11 7.4.8.3 DK.1 General 11 7.6.4 DK.1 Ultimate limit states 11 8 Foundations 12 8.2.2 DK.1 Geotechnical design by calculation 12 8.3 DK.1
26、 Soil investigation and geotechnical data (EN 1997-1:2004 Section 3) . 12 9 Conductors and earth-wires . 12 10 Insulators . 12 10.1 DK.1 Introduction 12 10.7 DK.1 Mechanical requirements 12 11 Hardware . 12 12 Quality assurance, checks and taking-over 12 BS EN 50341-2-5:2017EN 50341-2-5:2017BS EN 50
27、341-2-5:2017EN 50341-2-5:2017 -2/12- Denmark Contents Page European foreword 4 1 Scope 5 1.1 DK.1 Reliability levels . 5 2 Normative references, definitions and symbols 5 2.1 DK.1 Normative references . 5 2.3 DK.1 Symbols . 5 3 Basis of design 6 3.2 Requirements of overhead lines 6 3.2.2 DK.1 Reliab
28、ility levels 6 4 Actions on lines . 6 4.1 DK.1 Introduction . 6 4.3 Wind loads . 6 4.3.1 DK.1 Field of application and basic wind velocity 6 Table 4.3.1/DK.1 - Reference wind speeds in Denmark . 6 4.3.3 DK.1 Mean wind pressure 6 4.4 Wind forces on overhead line components . 6 4.4.1 Wind forces on co
29、nductors 6 4.4.1.1 DK.1 General . 6 DK.2 General . 6 4.4.1.3 DK.1 Drag factor 7 4.4.3 Wind forces on lattice towers . 7 4.4.3.1 DK.1 General . 7 4.4.4 DK.1 Wind forces on poles 7 4.5 Ice loads 7 4.5.1 DK.1 General . 7 4.5.2 DK.1 Ice forces on conductors 7 4.6 Combined wind and ice loads 7 4.6.6 Comb
30、ination of wind velocity and ice loads 7 4.6.6.1 DK.1 Extreme ice load IT combined with a high probability wind velocity VIH 7 4.6.6.2 DK.1 Nominal ice load l3 combined with a low probability wind velocity VIL . 7 4.7 DK.1 Temperature effects 7 4.8 Security loads 7 4.8.2 DK.1 Torsional loads . 8 4.8
31、.3 DK.1 Longitudinal loads 9 4.12 Load cases 9 4.12.1 DK.1 General . 9 4.12.2 DK.1 Standard load cases . 9 4.13 DK.1 Partial factors for actions 9 5 Electrical requirements 9 5.6 Load cases for calculation of clearances 9 5.6.1 DK.1 Load conditions . 9 5.6.2 DK.1 Maximum conductor temperature 9 5.6.
32、3 DK.1 Wind loads for determination of electric clearances 9 5.6.3.2 DK.1 Nominal wind loads for determination of internal and external clearances 10 5.6.4 DK.1 Ice loads for determination of electric clearances . 10 5.6.5 DK.1 Combined wind and ice loads 10 5.8 DK.1 Internal clearances within the s
33、pan and at the top of support 10 5.9 External clearances 10 5.9.3 DK.1 External clearances to residential and other buildings . 10 5.9.4 DK.1 External clearances to crossing traffic routes 10 5.9.7 DK.1 External clearances to recreational areas (playgrounds, sports areas, etc.) . 10 6 Earthing syste
34、ms 11 7 Supports . 11 7.1 Initial design considerations . 11 7.1.1 DK.1 Introduction . 11 7.2.1 DK.1 Steel materials, bolts, nuts and washers, welding consumables . 11 BS EN 50341-2-5:2017Denmark -3/12- EN 50341-2-5:2017 7.2.4 DK.1 Holding-down bolts . 11 7.3.6 Ultimate limit states . 11 7.3.6.1 DK.
35、1 General 11 7.4.6.1 DK.1 General 11 7.4.8 Resistance of connections 11 7.4.8.3 DK.1 General 11 7.6.4 DK.1 Ultimate limit states 11 8 Foundations 12 8.2.2 DK.1 Geotechnical design by calculation 12 8.3 DK.1 Soil investigation and geotechnical data (EN 1997-1:2004 Section 3) . 12 9 Conductors and ear
36、th-wires . 12 10 Insulators . 12 10.1 DK.1 Introduction 12 10.7 DK.1 Mechanical requirements 12 11 Hardware . 12 12 Quality assurance, checks and taking-over 12 BS EN 50341-2-5:2017EN 50341-2-5:2017BS EN 50341-2-5:2017EN 50341-2-5:2017 -4/12- Denmark European foreword 1 The Danish National Committee
37、 (NC) is identified by the following address: Dansk Standard Gteborg Plads 1 DK-2150 Nordhavn Phone no. +45 39 96 61 01 E-mail: dansk.standardds.dk 2 The Danish NC has prepared this Part 2-5 of EN 50341, listing the Danish national normative aspects, under its sole responsibility, and duly passed it
38、 through the CENELEC and CLC/TC 11 procedures. NOTE The Danish NC also takes sole responsibility for the technically correct coordination of this EN 50341-2-5 with EN 50341-1:2012. It has performed the necessary checks in the frame of quality assurance/control. It is noted however that this quality
39、assurance/control has been made in the framework of the general responsibility of a standards committee under the national laws/regulations. 3 This EN 50341-2-5 is normative in Denmark and informative for other countries. 4 This EN 50341-2-5 has to be read in conjunction with EN 50341-1:2012, herein
40、after referred to as Part 1. All clause numbers used in this Part 2-5 correspond to those of Part 1. Specific sub clauses, which are prefixed “DK”, are to be read as amendments to the relevant text in Part 1. Any necessary clarification regarding the application of Part 2-5 in conjunction with Part
41、1 shall be referred to the Danish NC who will, in cooperation with CLC/TC 11 clarify the requirements. When no reference is made in Part 2-5 to a specific sub clause, then Part 1 applies. 5 In the case of “boxed values” defined in Part 1, amended values (if any) which are defined in Part 2-5 shall b
42、e taken into account in Denmark. However any “boxed values“, whether in Part 1 or Part 2-5, shall not be amended in the direction of greater risk in a Project Specification. 6 The national Danish standards/regulations related to overhead electrical lines exceeding 1 kV (AC) are identified in 2.1/DK1
43、. NOTE All national standards referred to in this Part 2-5 will be replaced by the relevant European Standards as soon as they become available and are declared by the Danish NC to be applicable and thus reported to the secretary of CLC/TC 11. BS EN 50341-2-5:2017Denmark -5/12- EN 50341-2-5:2017 1 S
44、cope (snc) This Part 2-5 is applicable for new permanent overhead lines only and generally not for existing lines in Denmark. If some planning/design or execution work on existing lines in Denmark has to be performed, the degree of application of this Standard shall be agreed upon by the parties con
45、cerned and the authorities. 1.1 DK.1 General (ncpt) Installations in the planning and construction stage may be completed adopting the standard edition valid at the beginning of planning. 2 Normative references, definitions and symbols 2.1 DK.1 Normative references (A-dev) Lov nr. 525 af 29/04/2015.
46、 Lov om sikkerhed ved elektriske anlg, elektriske installationer og elektrisk materiel (Elsikkerhedsloven) Act No. 525 - 29/04/2015. Act on the Safety of Electrical Plants, Electrical Installations and Electrical Equipment (the Electrical Safety Act) Bekendtgrelse nr. 1114 af 18/08/2016 Bekendtgrels
47、e om sikkerhed for udfrelse af elektriske anlg Executive Order no. 1114 - 18/08/2016 Executive Order on Safety in connection with the Construction of Electrical Plants 2.3 DK.1 Symbols (ncpt) Symbol Signification Reference L Length of the intact span m 4.8.2/DK.1 E Modulus of elasticity of the condu
48、ctor N/mm2 4.8.2/DK.1 Weight of the conductor including possible external 4.8.2/DK.1 Load divided by the cross-sectional area N/m/mm2 Tensile stress in the conductor prior to breakage N/mm2 4.8.2/DK.1 I Max movement of movable suspension in the direction 4.8.2/DK.1 of the line m u Deflection of the support in the direction of the line at the 4.8.2/DK.1 attachment point of the insulator m d Horizontal co
